diff mbox series

[1/2] arm64: dts: imx8mq: add missing SAI nodes

Message ID 20191127182127.1204-1-l.stach@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series [1/2] arm64: dts: imx8mq: add missing SAI nodes | expand

Commit Message

Lucas Stach Nov. 27, 2019, 6:21 p.m. UTC 
Currently only SAI2 is present in the DT. Add all the other SAI
instances present on the SoC.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 70 +++++++++++++++++++++++
 1 file changed, 70 insertions(+)

Comments

Daniel Baluta Nov. 28, 2019, 11:46 a.m. UTC | #1 
On Wed, 2019-11-27 at 19:21 +0100, Lucas Stach wrote:
> Currently only SAI2 is present in the DT. Add all the other SAI
> instances present on the SoC.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Shawn Guo Dec. 9, 2019, 7:55 a.m. UTC | #2 
On Wed, Nov 27, 2019 at 07:21:26PM +0100, Lucas Stach wrote:
> Currently only SAI2 is present in the DT. Add all the other SAI
> instances present on the SoC.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Applied this one, thanks.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 55a3d1c4bdf0..42024ac3bc3f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -281,6 +281,62 @@ 
 			#size-cells = <1>;
 			ranges = <0x30000000 0x30000000 0x400000>;
 
+			sai1: sai@30010000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30010000 0x10000>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI1_IPG>,
+				         <&clk IMX8MQ_CLK_SAI1_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai6: sai@30030000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30030000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI6_IPG>,
+				         <&clk IMX8MQ_CLK_SAI6_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai5: sai@30040000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30040000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI5_IPG>,
+				         <&clk IMX8MQ_CLK_SAI5_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai4: sai@30050000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30050000 0x10000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI4_IPG>,
+				         <&clk IMX8MQ_CLK_SAI4_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			gpio1: gpio@30200000 {
 				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
 				reg = <0x30200000 0x10000>;
@@ -751,6 +807,20 @@ 
 				status = "disabled";
 			};
 
+			sai3: sai@308c0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x308c0000 0x10000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI3_IPG>,
+				         <&clk IMX8MQ_CLK_SAI3_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			crypto: crypto@30900000 {
 				compatible = "fsl,sec-v4.0";
 				#address-cells = <1>;