| Message ID | 20191202182205.14629-4-afaerber@suse.de (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | a5360a35772f4a621afc2c9b19eb99950a3e207b |
| Headers | show |
| Series | ARM: dts: realtek: Introduce syscon | expand |
> Group the non-iso reset controller nodes into a CRT syscon mfd node. > Group reset controller, watchdog and UART0 into an Isolation mfd node. > Group UART1 and UART2 into a Miscellaneous syscon mfd node. > > Cc: James Tai <james.tai@realtek.com> > Signed-off-by: Andreas Färber <afaerber@suse.de> > --- > arch/arm64/boot/dts/realtek/rtd139x.dtsi | 147 > +++++++++++++++++++------------ > 1 file changed, 90 insertions(+), 57 deletions(-) > > diff --git a/arch/arm64/boot/dts/realtek/rtd139x.dtsi > b/arch/arm64/boot/dts/realtek/rtd139x.dtsi > index c11a505e43e2..3a571f3b7e38 100644 > --- a/arch/arm64/boot/dts/realtek/rtd139x.dtsi > +++ b/arch/arm64/boot/dts/realtek/rtd139x.dtsi > @@ -61,70 +61,31 @@ > #size-cells = <1>; > ranges = <0x0 0x98000000 0x200000>; > > - reset1: reset-controller@0 { > - compatible = "snps,dw-low-reset"; > - reg = <0x0 0x4>; > - #reset-cells = <1>; > - }; > - > - reset2: reset-controller@4 { > - compatible = "snps,dw-low-reset"; > - reg = <0x4 0x4>; > - #reset-cells = <1>; > - }; > - > - reset3: reset-controller@8 { > - compatible = "snps,dw-low-reset"; > - reg = <0x8 0x4>; > - #reset-cells = <1>; > - }; > - > - reset4: reset-controller@50 { > - compatible = "snps,dw-low-reset"; > - reg = <0x50 0x4>; > - #reset-cells = <1>; > - }; > - > - iso_reset: reset-controller@7088 { > - compatible = "snps,dw-low-reset"; > - reg = <0x7088 0x4>; > - #reset-cells = <1>; > - }; > - > - wdt: watchdog@7680 { > - compatible = "realtek,rtd1295-watchdog"; > - reg = <0x7680 0x100>; > - clocks = <&osc27M>; > - }; > - > - uart0: serial@7800 { > - compatible = "snps,dw-apb-uart"; > - reg = <0x7800 0x400>; > - reg-shift = <2>; > + crt: syscon@0 { > + compatible = "syscon", "simple-mfd"; > + reg = <0x0 0x1000>; > reg-io-width = <4>; > - clock-frequency = <27000000>; > - resets = <&iso_reset RTD1295_ISO_RSTN_UR0>; > - status = "disabled"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x0 0x1000>; > }; > > - uart1: serial@1b200 { > - compatible = "snps,dw-apb-uart"; > - reg = <0x1b200 0x100>; > - reg-shift = <2>; > + iso: syscon@7000 { > + compatible = "syscon", "simple-mfd"; > + reg = <0x7000 0x1000>; > reg-io-width = <4>; > - clock-frequency = <432000000>; > - resets = <&reset2 RTD1295_RSTN_UR1>; > - status = "disabled"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x7000 0x1000>; > }; > > - uart2: serial@1b400 { > - compatible = "snps,dw-apb-uart"; > - reg = <0x1b400 0x100>; > - reg-shift = <2>; > + misc: syscon@1b000 { > + compatible = "syscon", "simple-mfd"; > + reg = <0x1b000 0x1000>; > reg-io-width = <4>; > - clock-frequency = <432000000>; > - resets = <&reset2 RTD1295_RSTN_UR2>; > - status = "disabled"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x1b000 0x1000>; > }; > }; > > @@ -140,3 +101,75 @@ > }; > }; > }; > + > +&crt { > + reset1: reset-controller@0 { > + compatible = "snps,dw-low-reset"; > + reg = <0x0 0x4>; > + #reset-cells = <1>; > + }; > + > + reset2: reset-controller@4 { > + compatible = "snps,dw-low-reset"; > + reg = <0x4 0x4>; > + #reset-cells = <1>; > + }; > + > + reset3: reset-controller@8 { > + compatible = "snps,dw-low-reset"; > + reg = <0x8 0x4>; > + #reset-cells = <1>; > + }; > + > + reset4: reset-controller@50 { > + compatible = "snps,dw-low-reset"; > + reg = <0x50 0x4>; > + #reset-cells = <1>; > + }; > +}; > + > +&iso { > + iso_reset: reset-controller@88 { > + compatible = "snps,dw-low-reset"; > + reg = <0x88 0x4>; > + #reset-cells = <1>; > + }; > + > + wdt: watchdog@680 { > + compatible = "realtek,rtd1295-watchdog"; > + reg = <0x680 0x100>; > + clocks = <&osc27M>; > + }; > + > + uart0: serial@800 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x800 0x400>; > + reg-shift = <2>; > + reg-io-width = <4>; > + clock-frequency = <27000000>; > + resets = <&iso_reset RTD1295_ISO_RSTN_UR0>; > + status = "disabled"; > + }; > +}; > + > +&misc { > + uart1: serial@200 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x200 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + clock-frequency = <432000000>; > + resets = <&reset2 RTD1295_RSTN_UR1>; > + status = "disabled"; > + }; > + > + uart2: serial@400 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x400 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + clock-frequency = <432000000>; > + resets = <&reset2 RTD1295_RSTN_UR2>; > + status = "disabled"; > + }; > +}; > -- > 2.16.4 > > Acked-by: James Tai <james.tai@realtek.com>
diff --git a/arch/arm64/boot/dts/realtek/rtd139x.dtsi b/arch/arm64/boot/dts/realtek/rtd139x.dtsi index c11a505e43e2..3a571f3b7e38 100644 --- a/arch/arm64/boot/dts/realtek/rtd139x.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd139x.dtsi @@ -61,70 +61,31 @@ #size-cells = <1>; ranges = <0x0 0x98000000 0x200000>; - reset1: reset-controller@0 { - compatible = "snps,dw-low-reset"; - reg = <0x0 0x4>; - #reset-cells = <1>; - }; - - reset2: reset-controller@4 { - compatible = "snps,dw-low-reset"; - reg = <0x4 0x4>; - #reset-cells = <1>; - }; - - reset3: reset-controller@8 { - compatible = "snps,dw-low-reset"; - reg = <0x8 0x4>; - #reset-cells = <1>; - }; - - reset4: reset-controller@50 { - compatible = "snps,dw-low-reset"; - reg = <0x50 0x4>; - #reset-cells = <1>; - }; - - iso_reset: reset-controller@7088 { - compatible = "snps,dw-low-reset"; - reg = <0x7088 0x4>; - #reset-cells = <1>; - }; - - wdt: watchdog@7680 { - compatible = "realtek,rtd1295-watchdog"; - reg = <0x7680 0x100>; - clocks = <&osc27M>; - }; - - uart0: serial@7800 { - compatible = "snps,dw-apb-uart"; - reg = <0x7800 0x400>; - reg-shift = <2>; + crt: syscon@0 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x1000>; reg-io-width = <4>; - clock-frequency = <27000000>; - resets = <&iso_reset RTD1295_ISO_RSTN_UR0>; - status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; }; - uart1: serial@1b200 { - compatible = "snps,dw-apb-uart"; - reg = <0x1b200 0x100>; - reg-shift = <2>; + iso: syscon@7000 { + compatible = "syscon", "simple-mfd"; + reg = <0x7000 0x1000>; reg-io-width = <4>; - clock-frequency = <432000000>; - resets = <&reset2 RTD1295_RSTN_UR1>; - status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7000 0x1000>; }; - uart2: serial@1b400 { - compatible = "snps,dw-apb-uart"; - reg = <0x1b400 0x100>; - reg-shift = <2>; + misc: syscon@1b000 { + compatible = "syscon", "simple-mfd"; + reg = <0x1b000 0x1000>; reg-io-width = <4>; - clock-frequency = <432000000>; - resets = <&reset2 RTD1295_RSTN_UR2>; - status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1b000 0x1000>; }; }; @@ -140,3 +101,75 @@ }; }; }; + +&crt { + reset1: reset-controller@0 { + compatible = "snps,dw-low-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + }; + + reset2: reset-controller@4 { + compatible = "snps,dw-low-reset"; + reg = <0x4 0x4>; + #reset-cells = <1>; + }; + + reset3: reset-controller@8 { + compatible = "snps,dw-low-reset"; + reg = <0x8 0x4>; + #reset-cells = <1>; + }; + + reset4: reset-controller@50 { + compatible = "snps,dw-low-reset"; + reg = <0x50 0x4>; + #reset-cells = <1>; + }; +}; + +&iso { + iso_reset: reset-controller@88 { + compatible = "snps,dw-low-reset"; + reg = <0x88 0x4>; + #reset-cells = <1>; + }; + + wdt: watchdog@680 { + compatible = "realtek,rtd1295-watchdog"; + reg = <0x680 0x100>; + clocks = <&osc27M>; + }; + + uart0: serial@800 { + compatible = "snps,dw-apb-uart"; + reg = <0x800 0x400>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <27000000>; + resets = <&iso_reset RTD1295_ISO_RSTN_UR0>; + status = "disabled"; + }; +}; + +&misc { + uart1: serial@200 { + compatible = "snps,dw-apb-uart"; + reg = <0x200 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <432000000>; + resets = <&reset2 RTD1295_RSTN_UR1>; + status = "disabled"; + }; + + uart2: serial@400 { + compatible = "snps,dw-apb-uart"; + reg = <0x400 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <432000000>; + resets = <&reset2 RTD1295_RSTN_UR2>; + status = "disabled"; + }; +};
Group the non-iso reset controller nodes into a CRT syscon mfd node. Group reset controller, watchdog and UART0 into an Isolation mfd node. Group UART1 and UART2 into a Miscellaneous syscon mfd node. Cc: James Tai <james.tai@realtek.com> Signed-off-by: Andreas Färber <afaerber@suse.de> --- arch/arm64/boot/dts/realtek/rtd139x.dtsi | 147 +++++++++++++++++++------------ 1 file changed, 90 insertions(+), 57 deletions(-)