@@ -4,6 +4,10 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
new file mode 100644
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree File for the Kontron KBox A-230-LS.
+ *
+ * This consists of a Kontron SMARC-sAL28 (Dual PHY) and a special
+ * carrier (s1914).
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28-var4.dts"
+
+/ {
+ model = "Kontron KBox A-230-LS";
+ compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4",
+ "kontron,sl28", "fsl,ls1028a";
+};
+
+&i2c4 {
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+};
new file mode 100644
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board on a SMARC Eval 2.0
+ * carrier (ADS2).
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+ model = "Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier";
+ compatible = "kontron,sl28-var3-ads2", "kontron,sl28-var3",
+ "kontron,sl28", "fsl,ls1028a";
+
+ sound {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "simple-audio-card";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line Out Jack",
+ "Microphone", "Microphone Jack",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "Line Out Jack", "LINEOUTR",
+ "Line Out Jack", "LINEOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "IN1L", "Line In Jack",
+ "IN1R", "Line In Jack",
+ "Microphone Jack", "MICBIAS",
+ "IN2L", "Microphone Jack",
+ "IN2R", "Microphone Jack";
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
+ bitclock-master = <&dailink0_master>;
+ frame-master = <&dailink0_master>;
+ format = "i2s";
+
+ cpu {
+ sound-dai = <&sai6>;
+ };
+
+ dailink0_master: codec {
+ sound-dai = <&wm8904>;
+ };
+ };
+
+ simple-audio-card,dai-link@1 {
+ reg = <1>;
+ bitclock-master = <&dailink1_master>;
+ frame-master = <&dailink1_master>;
+ format = "i2s";
+
+ cpu {
+ sound-dai = <&sai5>;
+ };
+
+ dailink1_master: codec {
+ sound-dai = <&wm8904>;
+ };
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ wm8904: audio-codec@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ clocks = <&mclk>;
+ clock-names = "mclk";
+ assigned-clocks = <&mclk>;
+ assigned-clock-rates = <1250000>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+};
+
+&sai5 {
+ status = "okay";
+};
+
+&sai6 {
+ status = "okay";
+};
+
+&soc {
+ mclk: clock-mclk@f130080 {
+ compatible = "fsl,vf610-sai-clock";
+ reg = <0x0 0xf130080 0x0 0x80>;
+ clocks = <&clockgen 4 1>;
+ #clock-cells = <0>;
+ };
+};
new file mode 100644
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 4 which has two ethernet ports. It
+ * extends the base and provides one more port connected via RGMII.
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+#include <dt-bindings/net/qca-ar803x.h>
+
+/ {
+ model = "Kontron SMARC-sAL28 (Dual PHY)";
+ compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_port1 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@4 {
+ reg = <0x4>;
+ eee-broken-1000t;
+ eee-broken-100tx;
+
+ qca,clk-out-frequency = <125000000>;
+ qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
+
+ vddio-supply = <&vddh>;
+
+ vddio: vddio-regulator {
+ regulator-name = "VDDIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddh: vddh-regulator {
+ regulator-name = "VDDH";
+ };
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a.dtsi"
+
+/ {
+ model = "Kontron SMARC-sAL28";
+ compatible = "kontron,sl28", "fsl,ls1028a";
+
+ aliases {
+ crypto = &crypto;
+ serial0 = &duart0;
+ serial1 = &duart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+&enetc_port0 {
+ phy-handle = <&phy0>;
+ phy-connection-type = "sgmii";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@5 {
+ reg = <0x5>;
+ eee-broken-1000t;
+ eee-broken-100tx;
+ };
+ };
+};
+
+&esdhc {
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+ status = "okay";
+};
+
+&esdhc1 {
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&fspi {
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ m25p,fast-read;
+ spi-max-frequency = <133000000>;
+ reg = <0>;
+ /* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
+ spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
+ spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+
+ partition@0 {
+ reg = <0x000000 0x010000>;
+ label = "rcw";
+ read-only;
+ };
+
+ partition@10000 {
+ reg = <0x010000 0x0f0000>;
+ label = "failsafe bootloader";
+ read-only;
+ };
+
+ partition@100000 {
+ reg = <0x100000 0x040000>;
+ label = "failsafe DP firmware";
+ read-only;
+ };
+
+ partition@140000 {
+ reg = <0x140000 0x0a0000>;
+ label = "failsafe trusted firmware";
+ read-only;
+ };
+
+ partition@1e0000 {
+ reg = <0x1e0000 0x020000>;
+ label = "reserved";
+ read-only;
+ };
+
+ partition@200000 {
+ reg = <0x200000 0x010000>;
+ label = "configuration store";
+ };
+
+ partition@210000 {
+ reg = <0x210000 0x0f0000>;
+ label = "bootloader";
+ };
+
+ partition@300000 {
+ reg = <0x300000 0x040000>;
+ label = "DP firmware";
+ };
+
+ partition@340000 {
+ reg = <0x340000 0x0a0000>;
+ label = "trusted firmware";
+ };
+
+ partition@3e0000 {
+ reg = <0x3e0000 0x020000>;
+ label = "bootloader environment";
+ };
+ };
+};
+
+&gpio1 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "TDO", "TCK",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "", "", "", "", "", "", "TMS", "TDI",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rtc@32 {
+ compatible = "microcrystal,rv8803";
+ reg = <0x32>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
Add device tree files for the Kontron SMARC-sAL28 board and its carriers. Signed-off-by: Michael Walle <michael@walle.cc> --- arch/arm64/boot/dts/freescale/Makefile | 4 + .../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 27 +++ .../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 106 +++++++++++ .../fsl-ls1028a-kontron-sl28-var4.dts | 50 +++++ .../freescale/fsl-ls1028a-kontron-sl28.dts | 174 ++++++++++++++++++ 5 files changed, 361 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts