diff mbox series

[v11,04/14] dt-bindings: Add bindings document of Aspeed PECI adapter

Message ID 20191211194624.2872-5-jae.hyun.yoo@linux.intel.com (mailing list archive)
State New, archived
Headers show
Series PECI device driver introduction | expand

Commit Message

Jae Hyun Yoo Dec. 11, 2019, 7:46 p.m. UTC 
This commit adds bindings document of Aspeed PECI adapter for ASPEED
AST24xx/25xx/26xx SoCs.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Milton Miller II <miltonm@us.ibm.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
---
Changes since v10:
- Changed documents format to DT schema format so I dropped all review tags.
  Please review it again.

 .../devicetree/bindings/peci/peci-aspeed.yaml | 124 ++++++++++++++++++
 1 file changed, 124 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/peci/peci-aspeed.yaml

Comments

Rob Herring Dec. 18, 2019, 2:57 a.m. UTC | #1 
On Wed, Dec 11, 2019 at 11:46:14AM -0800, Jae Hyun Yoo wrote:
> This commit adds bindings document of Aspeed PECI adapter for ASPEED
> AST24xx/25xx/26xx SoCs.
> 
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Joel Stanley <joel@jms.id.au>
> Cc: Andrew Jeffery <andrew@aj.id.au>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Jason M Biils <jason.m.bills@linux.intel.com>
> Cc: Milton Miller II <miltonm@us.ibm.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Robin Murphy <robin.murphy@arm.com>
> Cc: Ryan Chen <ryan_chen@aspeedtech.com>
> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
> ---
> Changes since v10:
> - Changed documents format to DT schema format so I dropped all review tags.
>   Please review it again.
> 
>  .../devicetree/bindings/peci/peci-aspeed.yaml | 124 ++++++++++++++++++
>  1 file changed, 124 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/peci/peci-aspeed.yaml
> 
> diff --git a/Documentation/devicetree/bindings/peci/peci-aspeed.yaml b/Documentation/devicetree/bindings/peci/peci-aspeed.yaml
> new file mode 100644
> index 000000000000..0f5c2993fe9b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/peci/peci-aspeed.yaml
> @@ -0,0 +1,124 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/peci/peci-aspeed.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Aspeed PECI Bus Device Tree Bindings
> +
> +maintainers:
> +  - Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - aspeed,ast2400-peci
> +      - aspeed,ast2500-peci
> +      - aspeed,ast2600-peci
> +
> +  reg:
> +    maxItems: 1
> +

> +  "#address-cells":
> +    # Required to define a client address.
> +    const: 1
> +
> +  "#size-cells":
> +    # Required to define a client address.
> +    const: 0

These 2 can be defined by the bus schema.

> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    description: |

You can drop the '|' if there's no formatting to preserve.

> +      Clock source for PECI controller. Should reference the external
> +      oscillator clock.
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  clock-frequency:
> +    # Operation frequency of PECI controller in units of Hz.
> +    minimum: 187500
> +    maximum: 24000000
> +
> +  msg-timing:
> +    description: |
> +      Message timing negotiation period. This value will determine the period
> +      of message timing negotiation to be issued by PECI controller. The unit
> +      of the programmed value is four times of PECI clock period.
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - minimum: 0
> +        maximum: 255
> +        default: 1
> +
> +  addr-timing:
> +    description: |
> +      Address timing negotiation period. This value will determine the period
> +      of address timing negotiation to be issued by PECI controller. The unit
> +      of the programmed value is four times of PECI clock period.
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - minimum: 0
> +        maximum: 255
> +        default: 1
> +
> +  rd-sampling-point:
> +    description: |
> +      Read sampling point selection. The whole period of a bit time will be
> +      divided into 16 time frames. This value will determine the time frame
> +      in which the controller will sample PECI signal for data read back.
> +      Usually in the middle of a bit time is the best.
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - minimum: 0
> +        maximum: 15
> +        default: 8
> +
> +  cmd-timeout-ms:
> +    # Command timeout in units of ms.
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - minimum: 1
> +        maximum: 60000
> +        default: 1000
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#address-cells"
> +  - "#size-cells"
> +  - interrupts
> +  - clocks
> +  - resets
> +  - clock-frequency
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/ast2600-clock.h>
> +    peci: bus@1e78b000 {
> +        compatible = "simple-bus";
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges = <0x0 0x1e78b000 0x60>;

You can drop this node in the examples.

> +
> +        peci0: peci-bus@0 {
> +            compatible = "aspeed,ast2600-peci";
> +            reg = <0x0 0x100>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
> +            clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
> +            resets = <&syscon ASPEED_RESET_PECI>;
> +            clock-frequency = <24000000>;
> +            msg-timing = <1>;
> +            addr-timing = <1>;
> +            rd-sampling-point = <8>;
> +            cmd-timeout-ms = <1000>;
> +        };
> +    };
> +...
> -- 
> 2.17.1
>
Jae Hyun Yoo Dec. 18, 2019, 11:21 p.m. UTC | #2 
Hi Rob,

On 12/17/2019 6:57 PM, Rob Herring wrote:
> On Wed, Dec 11, 2019 at 11:46:14AM -0800, Jae Hyun Yoo wrote:
>> This commit adds bindings document of Aspeed PECI adapter for ASPEED
>> AST24xx/25xx/26xx SoCs.
>>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: Joel Stanley <joel@jms.id.au>
>> Cc: Andrew Jeffery <andrew@aj.id.au>
>> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> Cc: Jason M Biils <jason.m.bills@linux.intel.com>
>> Cc: Milton Miller II <miltonm@us.ibm.com>
>> Cc: Pavel Machek <pavel@ucw.cz>
>> Cc: Robin Murphy <robin.murphy@arm.com>
>> Cc: Ryan Chen <ryan_chen@aspeedtech.com>
>> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
>> ---
>> Changes since v10:
>> - Changed documents format to DT schema format so I dropped all review tags.
>>    Please review it again.
>>
>>   .../devicetree/bindings/peci/peci-aspeed.yaml | 124 ++++++++++++++++++
>>   1 file changed, 124 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/peci/peci-aspeed.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/peci/peci-aspeed.yaml b/Documentation/devicetree/bindings/peci/peci-aspeed.yaml
>> new file mode 100644
>> index 000000000000..0f5c2993fe9b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/peci/peci-aspeed.yaml
>> @@ -0,0 +1,124 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/peci/peci-aspeed.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Aspeed PECI Bus Device Tree Bindings
>> +
>> +maintainers:
>> +  - Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - aspeed,ast2400-peci
>> +      - aspeed,ast2500-peci
>> +      - aspeed,ast2600-peci
>> +
>> +  reg:
>> +    maxItems: 1
>> +
> 
>> +  "#address-cells":
>> +    # Required to define a client address.
>> +    const: 1
>> +
>> +  "#size-cells":
>> +    # Required to define a client address.
>> +    const: 0
> 
> These 2 can be defined by the bus schema.

I see. I'll add these to peci-bus schema.

>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    description: |
> 
> You can drop the '|' if there's no formatting to preserve.

Will check this for all bindings in this patch set.

>> +      Clock source for PECI controller. Should reference the external
>> +      oscillator clock.
>> +    maxItems: 1
>> +
>> +  resets:
>> +    maxItems: 1
>> +
>> +  clock-frequency:
>> +    # Operation frequency of PECI controller in units of Hz.
>> +    minimum: 187500
>> +    maximum: 24000000
>> +
>> +  msg-timing:
>> +    description: |
>> +      Message timing negotiation period. This value will determine the period
>> +      of message timing negotiation to be issued by PECI controller. The unit
>> +      of the programmed value is four times of PECI clock period.
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/uint32
>> +      - minimum: 0
>> +        maximum: 255
>> +        default: 1
>> +
>> +  addr-timing:
>> +    description: |
>> +      Address timing negotiation period. This value will determine the period
>> +      of address timing negotiation to be issued by PECI controller. The unit
>> +      of the programmed value is four times of PECI clock period.
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/uint32
>> +      - minimum: 0
>> +        maximum: 255
>> +        default: 1
>> +
>> +  rd-sampling-point:
>> +    description: |
>> +      Read sampling point selection. The whole period of a bit time will be
>> +      divided into 16 time frames. This value will determine the time frame
>> +      in which the controller will sample PECI signal for data read back.
>> +      Usually in the middle of a bit time is the best.
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/uint32
>> +      - minimum: 0
>> +        maximum: 15
>> +        default: 8
>> +
>> +  cmd-timeout-ms:
>> +    # Command timeout in units of ms.
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/uint32
>> +      - minimum: 1
>> +        maximum: 60000
>> +        default: 1000
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - "#address-cells"
>> +  - "#size-cells"
>> +  - interrupts
>> +  - clocks
>> +  - resets
>> +  - clock-frequency
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +    #include <dt-bindings/clock/ast2600-clock.h>
>> +    peci: bus@1e78b000 {
>> +        compatible = "simple-bus";
>> +        #address-cells = <1>;
>> +        #size-cells = <1>;
>> +        ranges = <0x0 0x1e78b000 0x60>;
> 
> You can drop this node in the examples.

I see. Will drop the parent node in this example.

Thanks a lot for your review!

-Jae

>> +
>> +        peci0: peci-bus@0 {
>> +            compatible = "aspeed,ast2600-peci";
>> +            reg = <0x0 0x100>;
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +            interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
>> +            clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
>> +            resets = <&syscon ASPEED_RESET_PECI>;
>> +            clock-frequency = <24000000>;
>> +            msg-timing = <1>;
>> +            addr-timing = <1>;
>> +            rd-sampling-point = <8>;
>> +            cmd-timeout-ms = <1000>;
>> +        };
>> +    };
>> +...
>> -- 
>> 2.17.1
>>
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/peci/peci-aspeed.yaml b/Documentation/devicetree/bindings/peci/peci-aspeed.yaml
new file mode 100644
index 000000000000..0f5c2993fe9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/peci/peci-aspeed.yaml
@@ -0,0 +1,124 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/peci/peci-aspeed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed PECI Bus Device Tree Bindings
+
+maintainers:
+  - Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-peci
+      - aspeed,ast2500-peci
+      - aspeed,ast2600-peci
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    # Required to define a client address.
+    const: 1
+
+  "#size-cells":
+    # Required to define a client address.
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: |
+      Clock source for PECI controller. Should reference the external
+      oscillator clock.
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clock-frequency:
+    # Operation frequency of PECI controller in units of Hz.
+    minimum: 187500
+    maximum: 24000000
+
+  msg-timing:
+    description: |
+      Message timing negotiation period. This value will determine the period
+      of message timing negotiation to be issued by PECI controller. The unit
+      of the programmed value is four times of PECI clock period.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+        maximum: 255
+        default: 1
+
+  addr-timing:
+    description: |
+      Address timing negotiation period. This value will determine the period
+      of address timing negotiation to be issued by PECI controller. The unit
+      of the programmed value is four times of PECI clock period.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+        maximum: 255
+        default: 1
+
+  rd-sampling-point:
+    description: |
+      Read sampling point selection. The whole period of a bit time will be
+      divided into 16 time frames. This value will determine the time frame
+      in which the controller will sample PECI signal for data read back.
+      Usually in the middle of a bit time is the best.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+        maximum: 15
+        default: 8
+
+  cmd-timeout-ms:
+    # Command timeout in units of ms.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 1
+        maximum: 60000
+        default: 1000
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - interrupts
+  - clocks
+  - resets
+  - clock-frequency
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/ast2600-clock.h>
+    peci: bus@1e78b000 {
+        compatible = "simple-bus";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e78b000 0x60>;
+
+        peci0: peci-bus@0 {
+            compatible = "aspeed,ast2600-peci";
+            reg = <0x0 0x100>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+            resets = <&syscon ASPEED_RESET_PECI>;
+            clock-frequency = <24000000>;
+            msg-timing = <1>;
+            addr-timing = <1>;
+            rd-sampling-point = <8>;
+            cmd-timeout-ms = <1000>;
+        };
+    };
+...