| Message ID | 20191216095712.13266-14-kishon@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | PHY: Add support for SERDES in TI's J721E SoC | expand |
On Mon, Dec 16, 2019 at 03:27:11PM +0530, Kishon Vijay Abraham I wrote: > Add DT binding documentation for WIZ (SERDES wrapper). WIZ is *NOT* a > PHY but a wrapper used to configure some of the input signals to the > SERDES. It is used with both Sierra(16G) and Torrent(10G) serdes. > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > [jsarha@ti.com: Add separate compatible for Sierra(16G) and Torrent(10G) > SERDES] > Signed-off-by: Jyri Sarha <jsarha@ti.com> > --- > .../bindings/phy/ti,phy-j721e-wiz.yaml | 204 ++++++++++++++++++ > 1 file changed, 204 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > > diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > new file mode 100644 > index 000000000000..fd4204a960a9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > @@ -0,0 +1,204 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: TI J721E WIZ (SERDES Wrapper) > + > +maintainers: > + - Kishon Vijay Abraham I <kishon@ti.com> > + > +properties: > + compatible: > + enum: > + - ti,j721e-wiz-16g > + - ti,j721e-wiz-10g Tab size is 2 spaces. > + > + power-domains: > + maxItems: 1 > + > + clocks: > + maxItems: 3 > + description: clock-specifier to represent input to the WIZ > + > + clock-names: > + items: > + - const: fck > + - const: core_ref_clk > + - const: ext_ref_clk > + > + num-lanes: > + minimum: 1 > + maximum: 4 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 1 > + > + "#reset-cells": > + const: 1 > + > + ranges: true > + > + assigned-clocks: > + maxItems: 2 > + > + assigned-clock-parents: > + maxItems: 2 > + > +patternProperties: > + "^pll[0|1]-refclk$": Indentation > + type: object > + description: | Don't need the '|' unless there's formatting or multiple paragraphs. > + WIZ node should have subnodes for each of the PLLs present in > + the SERDES. > + properties: > + clocks: > + maxItems: 2 > + description: Phandle to clock nodes representing the two inputs to PLL. > + > + "#clock-cells": > + const: 0 > + > + assigned-clocks: > + maxItems: 1 > + > + assigned-clock-parents: > + maxItems: 1 > + > + required: > + - clocks > + - "#clock-cells" > + - assigned-clocks > + - assigned-clock-parents > + > + "^cmn-refclk1?-dig-div$": Indentation > + type: object > + description: | > + WIZ node should have subnodes for each of the PMA common refclock > + provided by the SERDES. > + properties: > + clocks: > + maxItems: 1 > + description: Phandle to the clock node representing the input to the > + divider clock. > + > + "#clock-cells": > + const: 0 > + > + required: > + - clocks > + - "#clock-cells" > + > + "^refclk-dig$": Indentation > + type: object > + description: | > + WIZ node should have subnode for refclk_dig to select the reference > + clock source for the reference clock used in the PHY and PMA digital > + logic. > + properties: > + clocks: > + maxItems: 4 > + description: Phandle to four clock nodes representing the inputs to > + refclk_dig > + > + "#clock-cells": > + const: 0 > + > + assigned-clocks: > + maxItems: 1 > + > + assigned-clock-parents: > + maxItems: 1 > + > + required: > + - clocks > + - "#clock-cells" > + - assigned-clocks > + - assigned-clock-parents > + > + "^serdes@[0-9a-f]+$": ... > + type: object > + description: | > + WIZ node should have '1' subnode for the SERDES. It could be either > + Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the > + bindings specified in > + Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt > + Torrent SERDES should follow the bindings specified in > + Documentation/devicetree/bindings/phy/phy-cadence-dp.txt > + > +required: > + - compatible > + - power-domains > + - clocks > + - clock-names > + - num-lanes > + - "#address-cells" > + - "#size-cells" > + - "#reset-cells" > + - ranges > + > +examples: > + - | > + #include <dt-bindings/soc/ti,sci_pm_domain.h> > + > + wiz@5000000 { > + compatible = "ti,j721e-wiz-16g"; > + #address-cells = <1>; > + #size-cells = <1>; > + power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>; > + clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>; > + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; > + assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>; > + assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>; > + num-lanes = <2>; > + #reset-cells = <1>; > + ranges = <0x5000000 0x0 0x5000000 0x10000>; > + > + pll0-refclk { > + clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>; > + #clock-cells = <0>; > + assigned-clocks = <&wiz1_pll0_refclk>; > + assigned-clock-parents = <&k3_clks 293 13>; > + }; > + > + pll1-refclk { > + clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>; > + #clock-cells = <0>; > + assigned-clocks = <&wiz1_pll1_refclk>; > + assigned-clock-parents = <&k3_clks 293 0>; > + }; > + > + cmn-refclk-dig-div { > + clocks = <&wiz1_refclk_dig>; > + #clock-cells = <0>; > + }; > + > + cmn-refclk1-dig-div { > + clocks = <&wiz1_pll1_refclk>; > + #clock-cells = <0>; > + }; > + > + refclk-dig { > + clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; > + #clock-cells = <0>; > + assigned-clocks = <&wiz0_refclk_dig>; > + assigned-clock-parents = <&k3_clks 292 11>; > + }; > + > + serdes@5000000 { > + compatible = "cdns,ti,sierra-phy-t0"; > + reg-names = "serdes"; > + reg = <0x5000000 0x10000>; > + #address-cells = <1>; > + #size-cells = <0>; > + resets = <&serdes_wiz0 0>; > + reset-names = "sierra_reset"; > + clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>; > + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; > + }; > + }; > -- > 2.17.1 >
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml new file mode 100644 index 000000000000..fd4204a960a9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -0,0 +1,204 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TI J721E WIZ (SERDES Wrapper) + +maintainers: + - Kishon Vijay Abraham I <kishon@ti.com> + +properties: + compatible: + enum: + - ti,j721e-wiz-16g + - ti,j721e-wiz-10g + + power-domains: + maxItems: 1 + + clocks: + maxItems: 3 + description: clock-specifier to represent input to the WIZ + + clock-names: + items: + - const: fck + - const: core_ref_clk + - const: ext_ref_clk + + num-lanes: + minimum: 1 + maximum: 4 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + "#reset-cells": + const: 1 + + ranges: true + + assigned-clocks: + maxItems: 2 + + assigned-clock-parents: + maxItems: 2 + +patternProperties: + "^pll[0|1]-refclk$": + type: object + description: | + WIZ node should have subnodes for each of the PLLs present in + the SERDES. + properties: + clocks: + maxItems: 2 + description: Phandle to clock nodes representing the two inputs to PLL. + + "#clock-cells": + const: 0 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + required: + - clocks + - "#clock-cells" + - assigned-clocks + - assigned-clock-parents + + "^cmn-refclk1?-dig-div$": + type: object + description: | + WIZ node should have subnodes for each of the PMA common refclock + provided by the SERDES. + properties: + clocks: + maxItems: 1 + description: Phandle to the clock node representing the input to the + divider clock. + + "#clock-cells": + const: 0 + + required: + - clocks + - "#clock-cells" + + "^refclk-dig$": + type: object + description: | + WIZ node should have subnode for refclk_dig to select the reference + clock source for the reference clock used in the PHY and PMA digital + logic. + properties: + clocks: + maxItems: 4 + description: Phandle to four clock nodes representing the inputs to + refclk_dig + + "#clock-cells": + const: 0 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + required: + - clocks + - "#clock-cells" + - assigned-clocks + - assigned-clock-parents + + "^serdes@[0-9a-f]+$": + type: object + description: | + WIZ node should have '1' subnode for the SERDES. It could be either + Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the + bindings specified in + Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt + Torrent SERDES should follow the bindings specified in + Documentation/devicetree/bindings/phy/phy-cadence-dp.txt + +required: + - compatible + - power-domains + - clocks + - clock-names + - num-lanes + - "#address-cells" + - "#size-cells" + - "#reset-cells" + - ranges + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + wiz@5000000 { + compatible = "ti,j721e-wiz-16g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>; + assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>; + num-lanes = <2>; + #reset-cells = <1>; + ranges = <0x5000000 0x0 0x5000000 0x10000>; + + pll0-refclk { + clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>; + #clock-cells = <0>; + assigned-clocks = <&wiz1_pll0_refclk>; + assigned-clock-parents = <&k3_clks 293 13>; + }; + + pll1-refclk { + clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz1_pll1_refclk>; + assigned-clock-parents = <&k3_clks 293 0>; + }; + + cmn-refclk-dig-div { + clocks = <&wiz1_refclk_dig>; + #clock-cells = <0>; + }; + + cmn-refclk1-dig-div { + clocks = <&wiz1_pll1_refclk>; + #clock-cells = <0>; + }; + + refclk-dig { + clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz0_refclk_dig>; + assigned-clock-parents = <&k3_clks 292 11>; + }; + + serdes@5000000 { + compatible = "cdns,ti,sierra-phy-t0"; + reg-names = "serdes"; + reg = <0x5000000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&serdes_wiz0 0>; + reset-names = "sierra_reset"; + clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + }; + };