diff mbox series

[v7,4/7] ARM: dts: sun8i-h3: Add thermal sensor and thermal zones

Message ID 20191218042121.1471954-5-anarsoul@gmail.com (mailing list archive)
State New, archived
Headers show
Series add thermal sensor driver for A64, A83T, H3, H5, H6, R40 | expand

Commit Message

Vasily Khoruzhick Dec. 18, 2019, 4:21 a.m. UTC 
From: Ondrej Jirman <megous@megous.com>

There is just one sensor for the CPU.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
 arch/arm/boot/dts/sun8i-h3.dtsi    | 20 ++++++++++++++++++++
 arch/arm/boot/dts/sunxi-h3-h5.dtsi |  6 ++++++
 2 files changed, 26 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index fe773c72a69b..be8f601ab8cf 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -199,6 +199,26 @@  mali: gpu@1c40000 {
 			assigned-clocks = <&ccu CLK_GPU>;
 			assigned-clock-rates = <384000000>;
 		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun8i-h3-ths";
+			reg = <0x01c25000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 0afea59486c2..6e68ed831015 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -231,6 +231,12 @@  mmc2: mmc@1c11000 {
 		sid: eeprom@1c14000 {
 			/* compatible is in per SoC .dtsi file */
 			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 4>;
+			};
 		};
 
 		usb_otg: usb@1c19000 {