@@ -121,6 +121,69 @@
kcs_addr = <0xca2>;
};
+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /*A0-A7*/ "BMC_CPLD_FPGA_SEL","","","","","","","",
+ /*B0-B7*/ "","BMC_DEBUG_EN","","","","BMC_PPIN","PS_PWROK",
+ "IRQ_PVDDQ_GHJ_VRHOT_LVT3",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "BIOS_MRC_DEBUG_MSG_DIS","BOARD_REV_ID0","",
+ "BOARD_REV_ID1","IRQ_DIMM_SAVE_LVT3","BOARD_REV_ID2",
+ "CPU_ERR0_LVT3_BMC","CPU_ERR1_LVT3_BMC",
+ /*E0-E7*/ "RESET_BUTTON","RESET_OUT","POWER_BUTTON",
+ "POWER_OUT","NMI_BUTTON","","CPU0_PROCHOT_LVT3_ BMC",
+ "CPU1_PROCHOT_LVT3_ BMC",
+ /*F0-F7*/ "IRQ_PVDDQ_ABC_VRHOT_LVT3","",
+ "IRQ_PVCCIN_CPU0_VRHOT_LVC3",
+ "IRQ_PVCCIN_CPU1_VRHOT_LVC3",
+ "IRQ_PVDDQ_KLM_VRHOT_LVT3","","P3VBAT_BRIDGE_EN","",
+ /*G0-G7*/ "CPU_ERR2_LVT3","CPU_CATERR_LVT3","PCH_BMC_THERMTRIP",
+ "CPU0_SKTOCC_LVT3","","","","BIOS_SMI_ACTIVE",
+ /*H0-H7*/ "LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2",
+ "LED_POST_CODE_3","LED_POST_CODE_4","LED_POST_CODE_5",
+ "LED_POST_CODE_6","LED_POST_CODE_7",
+ /*I0-I7*/ "CPU0_FIVR_FAULT_LVT3","CPU1_FIVR_FAULT_LVT3",
+ "FORCE_ADR","UV_ADR_TRIGGER_EN","","","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "IRQ_UV_DETECT","IRQ_OC_DETECT","HSC_TIMER_EXP","",
+ "MEM_THERM_EVENT_PCH","PMBUS_ALERT_BUF_EN","","",
+ /*M0-M7*/ "CPU0_RC_ERROR","CPU1_RC_ERROR","","OC_DETECT_EN",
+ "CPU0_THERMTRIP_LATCH_LVT3",
+ "CPU1_THERMTRIP_LATCH_LVT3","","",
+ /*N0-N7*/ "","","","CPU_MSMI_LVT3","","","","",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "BOARD_SKU_ID0","BOARD_SKU_ID1","BOARD_SKU_ID2",
+ "BOARD_SKU_ID3","BOARD_SKU_ID4","BMC_PREQ",
+ "BMC_PWR_DEBUG","RST_RSMRST",
+ /*Q0-Q7*/ "","","","","UARTSW_LSB","UARTSW_MSB",
+ "POST_CARD_PRES_BMC","PE_BMC_WAKE",
+ /*R0-R7*/ "","","BMC_TCK_MUX_SEL","BMC_PRDY",
+ "BMC_XDP_PRSNT_IN","RST_BMC_PLTRST_BUF","SLT_CFG0",
+ "SLT_CFG1",
+ /*S0-S7*/ "THROTTLE","BMC_READY","","HSC_SMBUS_SWITCH_EN","",
+ "","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","BMC_FAULT","","",
+ /*V0-V7*/ "","","","FAST_PROCHOT_EN","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","GLOBAL_RST_WARN",
+ "CPU0_MEMABC_MEMHOT_LVT3_BMC",
+ "CPU0_MEMDEF_MEMHOT_LVT3_BMC",
+ "CPU1_MEMGHJ_MEMHOT_LVT3_BMC",
+ "CPU1_MEMKLM_MEMHOT_LVT3_BMC",
+ /*Y0-Y7*/ "SIO_S3","SIO_S5","BMC_JTAG_SEL","SIO_ONCONTROL","",
+ "","","",
+ /*Z0-Z7*/ "","SIO_POWER_GOOD","IRQ_PVDDQ_DEF_VRHOT_LVT3","",
+ "","","","",
+ /*AA0-AA7*/ "CPU1_SKTOCC_LVT3","IRQ_SML1_PMBUS_ALERT",
+ "SERVER_POWER_LED","","PECI_MUX_SELECT","UV_HIGH_SET",
+ "","POST_COMPLETE",
+ /*AB0-AB7*/ "IRQ_HSC_FAULT","OCP_MEZZA_PRES","","","","","","",
+ /*AC0-AC7*/ "","","","","","","","";
+};
+
&mac0 {
status = "okay";
Added GPIO line names for all gpio used in tiogapass platform, these line names will be used by libgpiod to control GPIOs Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> --- .../dts/aspeed-bmc-facebook-tiogapass.dts | 63 +++++++++++++++++++ 1 file changed, 63 insertions(+)