diff mbox series

[2/2] arm64: dts: imx8mn: add crypto node

Message ID 20200106200154.30643-2-horia.geanta@nxp.com (mailing list archive)
State New, archived
Headers show
Series [1/2] crypto: caam - add support for i.MX8M Nano | expand

Commit Message

Horia Geanta Jan. 6, 2020, 8:01 p.m. UTC
Add node for CAAM - Cryptographic Acceleration and Assurance Module.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mn.dtsi | 30 +++++++++++++++++++++++
 1 file changed, 30 insertions(+)

Comments

Shawn Guo Jan. 9, 2020, 10:42 a.m. UTC | #1
On Mon, Jan 06, 2020 at 10:01:54PM +0200, Horia Geantă wrote:
> Add node for CAAM - Cryptographic Acceleration and Assurance Module.
> 
> Signed-off-by: Horia Geantă <horia.geanta@nxp.com>

Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index cce65b9a861f..c3fec19f4f05 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -537,6 +537,36 @@ 
 				status = "disabled";
 			};
 
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_AHB>,
+					 <&clk IMX8MN_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr0@1000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x1000 0x1000>;
+					 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr1@2000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x2000 0x1000>;
+					 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr2@3000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x3000 0x1000>;
+					 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
 			i2c1: i2c@30a20000 {
 				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
 				#address-cells = <1>;