From patchwork Tue Jan 14 21:38:07 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Johan Jonker X-Patchwork-Id: 11332879 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 842CE13BD for ; Tue, 14 Jan 2020 21:38:26 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 5F7042187F for ; Tue, 14 Jan 2020 21:38:26 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="lq83R+Qj"; dkim=fail reason="signature verification failed" (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="gfGJgRQS" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 5F7042187F Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=gmail.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:MIME-Version:Cc:List-Subscribe: List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:In-Reply-To: References:List-Owner; bh=mU7VvhFHi8ruuX74bxJaQ78pEDF8+CEUCVNLqBP2buQ=; b=lq8 3R+QjQYt1Qna87q2Q9n/t51YhGuSe3WPC74OVCxZg8OryNgPMpb/DCfiXaOGAjA5RllEPkgOrIgDO ac2D6IHDvTERCFcFAxr11LafpYnnFiUmdrzFR4uNljyYgu51O9JDvmgFbiN2AlhbT6GDZMe6BP9yO Xm3S4bgESTCYvXhbKw8npbCykchwU4j4ELBPkHuiBFuiGZasgmKXodwfseFxIR3zCRipBUJoDwgyQ X8oS/EU97T3J+ipXVcgDL+rR543NAGYuA2QRTArQCHPviKLyYXUsLczFSjywTpnYi/1m6FjAScILS okcZAm8KT/wF/Qzl0GhJar32Z50K66g==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1irTtH-0000S1-RG; Tue, 14 Jan 2020 21:38:23 +0000 Received: from mail-wr1-x443.google.com ([2a00:1450:4864:20::443]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1irTtE-0000R1-1Q; Tue, 14 Jan 2020 21:38:22 +0000 Received: by mail-wr1-x443.google.com with SMTP id z3so13732330wru.3; Tue, 14 Jan 2020 13:38:19 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id; bh=f9U5Bcu50iadv0QgDoBy+54uXwpfM8hXO8Wzm2sPm+4=; b=gfGJgRQSF8cGe6buDT2zg5bh5jYRCHzk/iOUGakroYL3N+SVnzgtZ53tSfPs7hMM3G y+XVNos8uAnEFk+rz3Ztp2zrZ3riiEsikZrYrbySCEDUq9VslAG93dvMirJsMpoj3IF9 BPFtJ8XRlFa2YhAX8cB7fH3dcSDMtP+0CTPbcFOLBPtdnL5NhhlMX+tWXJfiS6BP5lXd BwOl3Eu6JOTGl/rfQcBSYdc4b/d4z4eiEwXVrgRqsTu2WvXYMgop40MdzV16gMq02hK3 e9qVpd6NoNPqCnhwHX3oxQMsjHxXKSLqUH+gY+4Q6cumFUCXirC9kaeTPUTW4OnyVjIj 1HXg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id; bh=f9U5Bcu50iadv0QgDoBy+54uXwpfM8hXO8Wzm2sPm+4=; b=SqieeWBsGN8MceuAzhwXK6/nM0fpdrP0wKjanDHMxm/wnIqwmmM9ffkxIE2XVaoJAl sUZEy+lGGbi66c8J8bIZi18DWzTloNWgnd9dGcQeiQedaTSgbsC5oMm12hIecba9Ofbp YAxBCq1r4j40sn99li+IZXRfSWKxcrGdUiyXBwFtpcc/DVPUTtHERJyQLPd9Zfj9F+/G n2/tYAstOby3HZFH5TxKmifj0LumLHNfe5MssdeuutSgojtf+iJNgCRduwSTymt+S2dJ sgPVoNA50robkw/Bg1ON2pfLjgzIGcZ6bR9SkFSXuuN/gr+03s7kDFB0SyPgKQ1GQ9gT YsSQ== X-Gm-Message-State: APjAAAVE3bxI3rIe5xOiivTHatUtlyjGVEVxukOuuCEDc0Tnz4R/QDp1 YWlpZ6CBWODOmOrPIxXc2rc= X-Google-Smtp-Source: APXvYqx7jlovPuzPwm+3f5goeCHcrWhmaN+zGSu6JtqQaKt8TKMrJ9ixa+Z423zRHHFdOQu5pahIjg== X-Received: by 2002:adf:db84:: with SMTP id u4mr28121908wri.317.1579037897557; Tue, 14 Jan 2020 13:38:17 -0800 (PST) Received: from debian.home (ip51ccf9cd.speed.planet.nl. [81.204.249.205]) by smtp.gmail.com with ESMTPSA id w17sm21639511wrt.89.2020.01.14.13.38.16 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 14 Jan 2020 13:38:17 -0800 (PST) From: Johan Jonker To: ulf.hansson@linaro.org Subject: [RFC PATCH v1 1/3] dt-bindings: mmc: combine common mmc and dw-mshc properties Date: Tue, 14 Jan 2020 22:38:07 +0100 Message-Id: <20200114213809.27166-1-jbx6244@gmail.com> X-Mailer: git-send-email 2.11.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200114_133820_115451_EDD48C18 X-CRM114-Status: GOOD ( 24.12 ) X-Spam-Score: 0.1 (/) X-Spam-Report: SpamAssassin version 3.4.2 on bombadil.infradead.org summary: Content analysis details: (0.1 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at https://www.dnswl.org/, no trust [2a00:1450:4864:20:0:0:0:443 listed in] [list.dnswl.org] 0.2 FREEMAIL_ENVFROM_END_DIGIT Envelope-from freemail username ends in digit (jbx6244[at]gmail.com) 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record 0.0 FREEMAIL_FROM Sender email is commonly abused enduser mail provider (jbx6244[at]gmail.com) -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, heiko@sntech.de, linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org, robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Combine the common properties for mmc and dw-mshc in mmc-controller-common.yaml Signed-off-by: Johan Jonker --- .../bindings/mmc/mmc-controller-common.yaml | 342 +++++++++++++++++++++ .../devicetree/bindings/mmc/mmc-controller.yaml | 335 +------------------- 2 files changed, 346 insertions(+), 331 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml new file mode 100644 index 000000000..92e5c3129 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml @@ -0,0 +1,342 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/mmc-controller-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MMC Controller Common Properties + +maintainers: + - Ulf Hansson + +properties: + "#address-cells": + const: 1 + description: | + The cell is the slot ID if a function subnode is used. + + "#size-cells": + const: 0 + + # Card Detection. + # If none of these properties are supplied, the host native card + # detect will be used. Only one of them should be provided. + + broken-cd: + $ref: /schemas/types.yaml#/definitions/flag + description: + There is no card detection available; polling must be used. + + cd-gpios: + description: + The card detection will be done using the GPIO provided. + + non-removable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Non-removable slot (like eMMC); assume always present. + + # *NOTE* on CD and WP polarity. To use common for all SD/MMC host + # controllers line polarity properties, we have to fix the meaning + # of the "normal" and "inverted" line levels. We choose to follow + # the SDHCI standard, which specifies both those lines as "active + # low." Therefore, using the "cd-inverted" property means, that the + # CD line is active high, i.e. it is high, when a card is + # inserted. Similar logic applies to the "wp-inverted" property. + # + # CD and WP lines can be implemented on the hardware in one of two + # ways: as GPIOs, specified in cd-gpios and wp-gpios properties, or + # as dedicated pins. Polarity of dedicated pins can be specified, + # using *-inverted properties. GPIO polarity can also be specified + # using the GPIO_ACTIVE_LOW flag. This creates an ambiguity in the + # latter case. We choose to use the XOR logic for GPIO CD and WP + # lines. This means, the two properties are "superimposed," for + # example leaving the GPIO_ACTIVE_LOW flag clear and specifying the + # respective *-inverted property property results in a + # double-inversion and actually means the "normal" line polarity is + # in effect. + wp-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: + The Write Protect line polarity is inverted. + + cd-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: + The CD line polarity is inverted. + + # Other properties + + bus-width: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [1, 4, 8] + default: 1 + description: + Number of data lines. + + max-frequency: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 400000 + - maximum: 200000000 + description: + Maximum operating frequency of the bus. + + disable-wp: + $ref: /schemas/types.yaml#/definitions/flag + description: + When set, no physical write-protect line is present. This + property should only be specified when the controller has a + dedicated write-protect detection logic. If a GPIO is always used + for the write-protect detection logic, it is sufficient to not + specify the wp-gpios property in the absence of a write-protect + line. Not used in combination with eMMC or SDIO. + + wp-gpios: + description: + GPIO to use for the write-protect detection. + + cd-debounce-delay-ms: + description: + Set delay time before detecting card after card insert + interrupt. + + no-1-8-v: + $ref: /schemas/types.yaml#/definitions/flag + description: + When specified, denotes that 1.8V card voltage is not supported + on this system, even if the controller claims it. + + cap-sd-highspeed: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD high-speed timing is supported. + + cap-mmc-highspeed: + $ref: /schemas/types.yaml#/definitions/flag + description: + MMC high-speed timing is supported. + + sd-uhs-sdr12: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR12 speed is supported. + + sd-uhs-sdr25: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR25 speed is supported. + + sd-uhs-sdr50: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR50 speed is supported. + + sd-uhs-sdr104: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR104 speed is supported. + + sd-uhs-ddr50: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS DDR50 speed is supported. + + cap-power-off-card: + $ref: /schemas/types.yaml#/definitions/flag + description: + Powering off the card is safe. + + cap-mmc-hw-reset: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC hardware reset is supported + + cap-sdio-irq: + $ref: /schemas/types.yaml#/definitions/flag + description: + enable SDIO IRQ signalling on this interface + + full-pwr-cycle: + $ref: /schemas/types.yaml#/definitions/flag + description: + Full power cycle of the card is supported. + + mmc-ddr-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (1.2V I/O) is supported. + + mmc-ddr-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (1.8V I/O) is supported. + + mmc-ddr-3_3v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (3.3V I/O) is supported. + + mmc-hs200-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS200 mode (1.2V I/O) is supported. + + mmc-hs200-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS200 mode (1.8V I/O) is supported. + + mmc-hs400-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 mode (1.2V I/O) is supported. + + mmc-hs400-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 mode (1.8V I/O) is supported. + + mmc-hs400-enhanced-strobe: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 enhanced strobe mode is supported + + dsr: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 0xffff + description: + Value the card Driver Stage Register (DSR) should be programmed + with. + + no-sdio: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send SDIO commands during + initialization. + + no-sd: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send SD commands during initialization. + + no-mmc: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send MMC commands during + initialization. + + fixed-emmc-driver-type: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 4 + description: + For non-removable eMMC, enforce this driver type. The value is + the driver type as specified in the eMMC specification (table + 206 in spec version 5.1) + + post-power-on-delay-ms: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 10 + description: + It was invented for MMC pwrseq-simple which could be referred to + mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay + waiting for I/O signalling and card power supply to be stable, + regardless of whether pwrseq-simple is used. Default to 10ms if + no available. + + supports-cqe: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates that the corresponding + MMC host controller supports HW command queue feature. + + disable-cqe-dcmd: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates that the MMC + controller\'s command queue engine (CQE) does not support direct + commands (DCMDs). + + keep-power-in-suspend: + $ref: /schemas/types.yaml#/definitions/flag + description: + SDIO only. Preserves card power during a suspend/resume cycle. + + # Deprecated: enable-sdio-wakeup + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + SDIO only. Enables wake up of host system on SDIO IRQ assertion. + + vmmc-supply: + description: + Supply for the card power + + vqmmc-supply: + description: + Supply for the bus IO line power + + mmc-pwrseq: + $ref: /schemas/types.yaml#/definitions/phandle + description: + System-on-Chip designs may specify a specific MMC power + sequence. To successfully detect an (e)MMC/SD/SDIO card, that + power sequence must be maintained while initializing the card. + +patternProperties: + "^.*@[0-9]+$": + type: object + description: | + On embedded systems the cards connected to a host may need + additional properties. These can be specified in subnodes to the + host controller node. The subnodes are identified by the + standard \'reg\' property. Which information exactly can be + specified depends on the bindings for the SDIO function driver + for the subnode, as specified by the compatible string. + + properties: + compatible: + description: | + Name of SDIO function following generic names recommended + practice + + reg: + items: + - minimum: 0 + maximum: 7 + description: + Must contain the SDIO function number of the function this + subnode describes. A value of 0 denotes the memory SD + function, values from 1 to 7 denote the SDIO functions. + + broken-hpi: + $ref: /schemas/types.yaml#/definitions/flag + description: + Use this to indicate that the mmc-card has a broken hpi + implementation, and that hpi should not be used. + + required: + - reg + + "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$": + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + minimum: 0 + maximum: 359 + description: + Set the clock (phase) delays which are to be configured in the + controller while switching to particular speed mode. These values + are in pair of degrees. + +dependencies: + cd-debounce-delay-ms: [ cd-gpios ] + fixed-emmc-driver-type: [ non-removable ] diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index 3c0df4016..6c7085395 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -14,341 +14,14 @@ description: | that requires the respective functionality should implement them using these definitions. +allOf: + - $ref: "mmc-controller-common.yaml" + +# Everything else is described in the common file properties: $nodename: pattern: "^mmc(@.*)?$" - "#address-cells": - const: 1 - description: | - The cell is the slot ID if a function subnode is used. - - "#size-cells": - const: 0 - - # Card Detection. - # If none of these properties are supplied, the host native card - # detect will be used. Only one of them should be provided. - - broken-cd: - $ref: /schemas/types.yaml#/definitions/flag - description: - There is no card detection available; polling must be used. - - cd-gpios: - description: - The card detection will be done using the GPIO provided. - - non-removable: - $ref: /schemas/types.yaml#/definitions/flag - description: - Non-removable slot (like eMMC); assume always present. - - # *NOTE* on CD and WP polarity. To use common for all SD/MMC host - # controllers line polarity properties, we have to fix the meaning - # of the "normal" and "inverted" line levels. We choose to follow - # the SDHCI standard, which specifies both those lines as "active - # low." Therefore, using the "cd-inverted" property means, that the - # CD line is active high, i.e. it is high, when a card is - # inserted. Similar logic applies to the "wp-inverted" property. - # - # CD and WP lines can be implemented on the hardware in one of two - # ways: as GPIOs, specified in cd-gpios and wp-gpios properties, or - # as dedicated pins. Polarity of dedicated pins can be specified, - # using *-inverted properties. GPIO polarity can also be specified - # using the GPIO_ACTIVE_LOW flag. This creates an ambiguity in the - # latter case. We choose to use the XOR logic for GPIO CD and WP - # lines. This means, the two properties are "superimposed," for - # example leaving the GPIO_ACTIVE_LOW flag clear and specifying the - # respective *-inverted property property results in a - # double-inversion and actually means the "normal" line polarity is - # in effect. - wp-inverted: - $ref: /schemas/types.yaml#/definitions/flag - description: - The Write Protect line polarity is inverted. - - cd-inverted: - $ref: /schemas/types.yaml#/definitions/flag - description: - The CD line polarity is inverted. - - # Other properties - - bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 4, 8] - default: 1 - description: - Number of data lines. - - max-frequency: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 400000 - - maximum: 200000000 - description: - Maximum operating frequency of the bus. - - disable-wp: - $ref: /schemas/types.yaml#/definitions/flag - description: - When set, no physical write-protect line is present. This - property should only be specified when the controller has a - dedicated write-protect detection logic. If a GPIO is always used - for the write-protect detection logic, it is sufficient to not - specify the wp-gpios property in the absence of a write-protect - line. Not used in combination with eMMC or SDIO. - - wp-gpios: - description: - GPIO to use for the write-protect detection. - - cd-debounce-delay-ms: - description: - Set delay time before detecting card after card insert - interrupt. - - no-1-8-v: - $ref: /schemas/types.yaml#/definitions/flag - description: - When specified, denotes that 1.8V card voltage is not supported - on this system, even if the controller claims it. - - cap-sd-highspeed: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD high-speed timing is supported. - - cap-mmc-highspeed: - $ref: /schemas/types.yaml#/definitions/flag - description: - MMC high-speed timing is supported. - - sd-uhs-sdr12: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD UHS SDR12 speed is supported. - - sd-uhs-sdr25: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD UHS SDR25 speed is supported. - - sd-uhs-sdr50: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD UHS SDR50 speed is supported. - - sd-uhs-sdr104: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD UHS SDR104 speed is supported. - - sd-uhs-ddr50: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD UHS DDR50 speed is supported. - - cap-power-off-card: - $ref: /schemas/types.yaml#/definitions/flag - description: - Powering off the card is safe. - - cap-mmc-hw-reset: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC hardware reset is supported - - cap-sdio-irq: - $ref: /schemas/types.yaml#/definitions/flag - description: - enable SDIO IRQ signalling on this interface - - full-pwr-cycle: - $ref: /schemas/types.yaml#/definitions/flag - description: - Full power cycle of the card is supported. - - mmc-ddr-1_2v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC high-speed DDR mode (1.2V I/O) is supported. - - mmc-ddr-1_8v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC high-speed DDR mode (1.8V I/O) is supported. - - mmc-ddr-3_3v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC high-speed DDR mode (3.3V I/O) is supported. - - mmc-hs200-1_2v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC HS200 mode (1.2V I/O) is supported. - - mmc-hs200-1_8v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC HS200 mode (1.8V I/O) is supported. - - mmc-hs400-1_2v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC HS400 mode (1.2V I/O) is supported. - - mmc-hs400-1_8v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC HS400 mode (1.8V I/O) is supported. - - mmc-hs400-enhanced-strobe: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC HS400 enhanced strobe mode is supported - - dsr: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 0xffff - description: - Value the card Driver Stage Register (DSR) should be programmed - with. - - no-sdio: - $ref: /schemas/types.yaml#/definitions/flag - description: - Controller is limited to send SDIO commands during - initialization. - - no-sd: - $ref: /schemas/types.yaml#/definitions/flag - description: - Controller is limited to send SD commands during initialization. - - no-mmc: - $ref: /schemas/types.yaml#/definitions/flag - description: - Controller is limited to send MMC commands during - initialization. - - fixed-emmc-driver-type: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 4 - description: - For non-removable eMMC, enforce this driver type. The value is - the driver type as specified in the eMMC specification (table - 206 in spec version 5.1) - - post-power-on-delay-ms: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 10 - description: - It was invented for MMC pwrseq-simple which could be referred to - mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay - waiting for I/O signalling and card power supply to be stable, - regardless of whether pwrseq-simple is used. Default to 10ms if - no available. - - supports-cqe: - $ref: /schemas/types.yaml#/definitions/flag - description: - The presence of this property indicates that the corresponding - MMC host controller supports HW command queue feature. - - disable-cqe-dcmd: - $ref: /schemas/types.yaml#/definitions/flag - description: - The presence of this property indicates that the MMC - controller\'s command queue engine (CQE) does not support direct - commands (DCMDs). - - keep-power-in-suspend: - $ref: /schemas/types.yaml#/definitions/flag - description: - SDIO only. Preserves card power during a suspend/resume cycle. - - # Deprecated: enable-sdio-wakeup - wakeup-source: - $ref: /schemas/types.yaml#/definitions/flag - description: - SDIO only. Enables wake up of host system on SDIO IRQ assertion. - - vmmc-supply: - description: - Supply for the card power - - vqmmc-supply: - description: - Supply for the bus IO line power - - mmc-pwrseq: - $ref: /schemas/types.yaml#/definitions/phandle - description: - System-on-Chip designs may specify a specific MMC power - sequence. To successfully detect an (e)MMC/SD/SDIO card, that - power sequence must be maintained while initializing the card. - -patternProperties: - "^.*@[0-9]+$": - type: object - description: | - On embedded systems the cards connected to a host may need - additional properties. These can be specified in subnodes to the - host controller node. The subnodes are identified by the - standard \'reg\' property. Which information exactly can be - specified depends on the bindings for the SDIO function driver - for the subnode, as specified by the compatible string. - - properties: - compatible: - description: | - Name of SDIO function following generic names recommended - practice - - reg: - items: - - minimum: 0 - maximum: 7 - description: - Must contain the SDIO function number of the function this - subnode describes. A value of 0 denotes the memory SD - function, values from 1 to 7 denote the SDIO functions. - - broken-hpi: - $ref: /schemas/types.yaml#/definitions/flag - description: - Use this to indicate that the mmc-card has a broken hpi - implementation, and that hpi should not be used. - - required: - - reg - - "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$": - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 2 - maxItems: 2 - items: - minimum: 0 - maximum: 359 - description: - Set the clock (phase) delays which are to be configured in the - controller while switching to particular speed mode. These values - are in pair of degrees. - -dependencies: - cd-debounce-delay-ms: [ cd-gpios ] - fixed-emmc-driver-type: [ non-removable ] - examples: - | sdhci@ab000000 {