@@ -50,6 +50,8 @@ static SUNXI_CCU_M(mixer1_div_a83_clk, "mixer1-div", "pll-de", 0x0c, 4, 4,
CLK_SET_RATE_PARENT);
static SUNXI_CCU_M(wb_div_a83_clk, "wb-div", "pll-de", 0x0c, 8, 4,
CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M(rot_div_a83_clk, "rot-div", "pll-de", 0x0c, 0x0c, 4,
+ CLK_SET_RATE_PARENT);
static struct ccu_common *sun8i_a83t_de2_clks[] = {
&mixer0_clk.common,
@@ -63,6 +65,10 @@ static struct ccu_common *sun8i_a83t_de2_clks[] = {
&mixer0_div_a83_clk.common,
&mixer1_div_a83_clk.common,
&wb_div_a83_clk.common,
+
+ &bus_rot_clk.common,
+ &rot_clk.common,
+ &rot_div_a83_clk.common,
};
static struct ccu_common *sun8i_h3_de2_clks[] = {
@@ -113,16 +119,19 @@ static struct clk_hw_onecell_data sun8i_a83t_de2_hw_clks = {
[CLK_MIXER0] = &mixer0_clk.common.hw,
[CLK_MIXER1] = &mixer1_clk.common.hw,
[CLK_WB] = &wb_clk.common.hw,
+ [CLK_ROT] = &rot_clk.common.hw,
[CLK_BUS_MIXER0] = &bus_mixer0_clk.common.hw,
[CLK_BUS_MIXER1] = &bus_mixer1_clk.common.hw,
[CLK_BUS_WB] = &bus_wb_clk.common.hw,
+ [CLK_BUS_ROT] = &bus_rot_clk.common.hw,
[CLK_MIXER0_DIV] = &mixer0_div_a83_clk.common.hw,
[CLK_MIXER1_DIV] = &mixer1_div_a83_clk.common.hw,
[CLK_WB_DIV] = &wb_div_a83_clk.common.hw,
+ [CLK_ROT_DIV] = &rot_div_a83_clk.common.hw,
},
- .num = CLK_NUMBER_WITHOUT_ROT,
+ .num = CLK_NUMBER_WITH_ROT,
};
static struct clk_hw_onecell_data sun8i_h3_de2_hw_clks = {
@@ -183,6 +192,7 @@ static struct ccu_reset_map sun8i_a83t_de2_resets[] = {
* exported here.
*/
[RST_WB] = { 0x08, BIT(2) },
+ [RST_ROT] = { 0x08, BIT(3) },
};
static struct ccu_reset_map sun8i_h3_de2_resets[] = {
A83T structures don't have clocks and reset for rotation core. Add them. Fixes: 763c5bd045b1 "clk: sunxi-ng: add support for DE2 CCU" Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> --- drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)