@@ -88,7 +88,7 @@ $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
-sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [a-zA-Z] \(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|kernel_info\|_end\|_ehead\|_text\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [a-zA-Z] \(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|efi32_pe_entry\|input_data\|kernel_info\|_end\|_ehead\|_text\|z_.*\)$$/\#define ZO_\2 0x\1/p'
quiet_cmd_zoffset = ZOFFSET $@
cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
@@ -106,7 +106,7 @@ coff_header:
#else
.word 0x8664 # x86-64
#endif
- .word 3 # nr_sections
+ .word section_count # nr_sections
.long 0 # TimeDateStamp
.long 0 # PointerToSymbolTable
.long 1 # NumberOfSymbols
@@ -230,6 +230,23 @@ section_table:
.word 0 # NumberOfLineNumbers
.long 0x42100040 # Characteristics (section flags)
+#ifdef CONFIG_EFI_MIXED
+ #
+ # The offset & size fields are filled in by build.c.
+ #
+ .asciz ".compat"
+ .long 0
+ .long 0x0
+ .long 0 # Size of initialized data
+ # on disk
+ .long 0x0
+ .long 0 # PointerToRelocations
+ .long 0 # PointerToLineNumbers
+ .word 0 # NumberOfRelocations
+ .word 0 # NumberOfLineNumbers
+ .long 0x60500020 # Characteristics (section flags)
+#endif
+
#
# The offset & size fields are filled in by build.c.
#
@@ -248,6 +265,7 @@ section_table:
.word 0 # NumberOfLineNumbers
.long 0x60500020 # Characteristics (section flags)
+ .set section_count, (. - section_table) / 40
#endif /* CONFIG_EFI_STUB */
# Kernel attributes; used by setup. This is part 1 of the
@@ -53,9 +53,16 @@ u8 buf[SETUP_SECT_MAX*512];
#define PECOFF_RELOC_RESERVE 0x20
+#ifdef CONFIG_EFI_MIXED
+#define PECOFF_COMPAT_RESERVE 0x20
+#else
+#define PECOFF_COMPAT_RESERVE 0x0
+#endif
+
unsigned long efi32_stub_entry;
unsigned long efi64_stub_entry;
unsigned long efi_pe_entry;
+unsigned long efi32_pe_entry;
unsigned long kernel_info;
unsigned long startup_64;
@@ -189,7 +196,8 @@ static void update_pecoff_section_header(char *section_name, u32 offset, u32 siz
static void update_pecoff_setup_and_reloc(unsigned int size)
{
u32 setup_offset = 0x200;
- u32 reloc_offset = size - PECOFF_RELOC_RESERVE;
+ u32 reloc_offset = size - PECOFF_RELOC_RESERVE - PECOFF_COMPAT_RESERVE;
+ u32 compat_offset = reloc_offset + PECOFF_RELOC_RESERVE;
u32 setup_size = reloc_offset - setup_offset;
update_pecoff_section_header(".setup", setup_offset, setup_size);
@@ -201,6 +209,20 @@ static void update_pecoff_setup_and_reloc(unsigned int size)
*/
put_unaligned_le32(reloc_offset + 10, &buf[reloc_offset]);
put_unaligned_le32(10, &buf[reloc_offset + 4]);
+
+#ifdef CONFIG_EFI_MIXED
+ update_pecoff_section_header(".compat", compat_offset, PECOFF_COMPAT_RESERVE);
+
+ /*
+ * Put the IA-32 machine type (0x14c) and the associated entry point
+ * address in the .compat section, so loaders can figure out which other
+ * execution modes this image supports.
+ */
+ buf[compat_offset] = 0x1;
+ buf[compat_offset + 1] = 0x8;
+ put_unaligned_le16(0x14c, &buf[compat_offset + 2]);
+ put_unaligned_le32(efi32_pe_entry + size, &buf[compat_offset + 4]);
+#endif
}
static void update_pecoff_text(unsigned int text_start, unsigned int file_sz,
@@ -282,6 +304,12 @@ static inline int reserve_pecoff_reloc_section(int c)
}
#endif /* CONFIG_EFI_STUB */
+static int reserve_pecoff_compat_section(int c)
+{
+ /* Reserve 0x20 bytes for .compat section */
+ memset(buf+c, 0, PECOFF_COMPAT_RESERVE);
+ return PECOFF_COMPAT_RESERVE;
+}
/*
* Parse zoffset.h and find the entry points. We could just #include zoffset.h
@@ -314,6 +342,7 @@ static void parse_zoffset(char *fname)
PARSE_ZOFS(p, efi32_stub_entry);
PARSE_ZOFS(p, efi64_stub_entry);
PARSE_ZOFS(p, efi_pe_entry);
+ PARSE_ZOFS(p, efi32_pe_entry);
PARSE_ZOFS(p, kernel_info);
PARSE_ZOFS(p, startup_64);
@@ -357,6 +386,7 @@ int main(int argc, char ** argv)
die("Boot block hasn't got boot flag (0xAA55)");
fclose(file);
+ c += reserve_pecoff_compat_section(c);
c += reserve_pecoff_reloc_section(c);
/* Pad unused space with zeros */
Currently, mixed mode is closely tied to the EFI handover protocol and relies on intimate knowledge of the bootparams structure, setup header etc, all of which are rather byzantine and entirely specific to x86. Even though no other EFI supported architectures are currently known that could support something like mixed mode, it makes sense to abstract a bit from this, and make it part of a generic Linux on EFI boot protocol. To that end, add a .compat section to the mixed mode binary, and populate it with the PE machine type and entry point address, allowing firmware implementations to match it to their native machine type, and invoke non-native binaries using a secondary entry point. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> --- arch/x86/boot/Makefile | 2 +- arch/x86/boot/header.S | 20 +++++++++++- arch/x86/boot/tools/build.c | 32 +++++++++++++++++++- 3 files changed, 51 insertions(+), 3 deletions(-)