[09/10] clk: mmp2: Add PLLs that are available on MMP3

Commit Message

Lubomir Rintel Feb. 19, 2020, 7:33 a.m. UTC

There are more PLLs on MMP3 and are configured slightly differently.
Tested on a MMP3-based Dell Wyse 3020 machine.

Signed-off-by: Lubomir Rintel <[e-mail]>
---
 drivers/clk/mmp/clk-of-mmp2.c | 34 +++++++++++++++++++++++++++-------
 1 file changed, 27 insertions(+), 7 deletions(-)

Patch

diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index 7594a8280b93a..310d77855f03f 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -57,10 +57,16 @@ 
 #define APMU_USBHSIC0	0xf8
 #define APMU_USBHSIC1	0xfc
 
-#define MPMU_FCCR	0x8
-#define MPMU_POSR	0x10
-#define MPMU_UART_PLL	0x14
-#define MPMU_PLL2_CR	0x34
+#define MPMU_FCCR		0x8
+#define MPMU_POSR		0x10
+#define MPMU_UART_PLL		0x14
+#define MPMU_PLL2_CR		0x34
+/* MMP3 specific below */
+#define MPMU_PLL3_CR		0x50
+#define MPMU_PLL3_CTRL1		0x58
+#define MPMU_PLL1_CTRL		0x5c
+#define MPMU_PLL_DIFF_CTRL	0x68
+#define MPMU_PLL2_CTRL1		0x414
 
 enum mmp2_clk_model {
 	CLK_MODEL_MMP2,
@@ -86,6 +92,14 @@  static struct mmp_param_pll_clk pll_clks[] = {
 	{MMP2_CLK_PLL2,   "pll2",           0, MPMU_PLL2_CR,       0x0300, MPMU_PLL2_CR, 10},
 };
 
+static struct mmp_param_pll_clk mmp3_pll_clks[] = {
+	{MMP2_CLK_PLL2,   "pll1",   797330000, MPMU_FCCR,          0x4000, MPMU_POSR,     0,      26000000, MPMU_PLL1_CTRL,      25},
+	{MMP2_CLK_PLL2,   "pll2",           0, MPMU_PLL2_CR,       0x0300, MPMU_PLL2_CR, 10,      26000000, MPMU_PLL2_CTRL1,     25},
+	{MMP3_CLK_PLL1_P, "pll1_p",         0, MPMU_PLL_DIFF_CTRL, 0x0010, 0,             0,     797330000, MPMU_PLL_DIFF_CTRL,   0},
+	{MMP3_CLK_PLL2_P, "pll2_p",         0, MPMU_PLL_DIFF_CTRL, 0x0100, MPMU_PLL2_CR, 10,      26000000, MPMU_PLL_DIFF_CTRL,   5},
+	{MMP3_CLK_PLL3,   "pll3",           0, MPMU_PLL3_CR,       0x0300, MPMU_PLL3_CR, 10,      26000000, MPMU_PLL3_CTRL1,     25},
+};
+
 static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
 	{MMP2_CLK_PLL1_2, "pll1_2", "pll1", 1, 2, 0},
 	{MMP2_CLK_PLL1_4, "pll1_4", "pll1_2", 1, 2, 0},
@@ -127,9 +141,15 @@  static void mmp2_pll_init(struct mmp2_clk_unit *pxa_unit)
 	mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
 					ARRAY_SIZE(fixed_rate_clks));
 
-	mmp_register_pll_clks(unit, pll_clks,
-				pxa_unit->mpmu_base,
-				ARRAY_SIZE(pll_clks));
+	if (pxa_unit->model == CLK_MODEL_MMP3) {
+		mmp_register_pll_clks(unit, mmp3_pll_clks,
+					pxa_unit->mpmu_base,
+					ARRAY_SIZE(mmp3_pll_clks));
+	} else {
+		mmp_register_pll_clks(unit, pll_clks,
+					pxa_unit->mpmu_base,
+					ARRAY_SIZE(pll_clks));
+	}
 
 	mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
 					ARRAY_SIZE(fixed_factor_clks));