| Message ID | 20200311124506.208376-3-jean-philippe@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | PCI/ATS: Device-tree support and other improvements | expand |
On Wed, Mar 11, 2020 at 01:44:57PM +0100, Jean-Philippe Brucker wrote: > Each vendor has their own way of describing whether a host bridge > supports ATS. The Intel and AMD ACPI tables selectively enable or > disable ATS per device or sub-tree, while Arm has a single bit for each > host bridge. For those that need it, add an ats_supported bit to the > host bridge structure. Can you mention the specific ACPI tables here in the commit log? Maybe elaborate on the "for those that need it" bit? I'm not sure if you need it for the cases where DT or ACPI tells us directly for the host bridge, or if you need it for the more selective cases? I guess in one sense you *always* need it since you check the cached bit later. I don't understand the implications of this, especially the selective situation. Given your comment from the first posting, I thought this was a property of the host bridge, so I don't know what it means to say some devices support ATS but others don't. > Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> > --- > v1->v2: try to improve the comment > --- > drivers/pci/probe.c | 8 ++++++++ > include/linux/pci.h | 1 + > 2 files changed, 9 insertions(+) > > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > index 512cb4312ddd..b5e36f06b40a 100644 > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -598,6 +598,14 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge) > bridge->native_shpc_hotplug = 1; > bridge->native_pme = 1; > bridge->native_ltr = 1; > + > + /* > + * Some systems (ACPI IORT, device-tree) declare ATS support at the host > + * bridge, and clear this bit when ATS isn't supported. Others (ACPI > + * DMAR and IVRS) declare ATS support with a smaller granularity, and > + * need this bit set. > + */ > + bridge->ats_supported = 1; > } > > struct pci_host_bridge *pci_alloc_host_bridge(size_t priv) > diff --git a/include/linux/pci.h b/include/linux/pci.h > index 3840a541a9de..9fe2e84d74d7 100644 > --- a/include/linux/pci.h > +++ b/include/linux/pci.h > @@ -511,6 +511,7 @@ struct pci_host_bridge { > unsigned int native_pme:1; /* OS may use PCIe PME */ > unsigned int native_ltr:1; /* OS may use PCIe LTR */ > unsigned int preserve_config:1; /* Preserve FW resource setup */ > + unsigned int ats_supported:1; > > /* Resource alignment requirements */ > resource_size_t (*align_resource)(struct pci_dev *dev, > -- > 2.25.1 >
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 512cb4312ddd..b5e36f06b40a 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -598,6 +598,14 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge) bridge->native_shpc_hotplug = 1; bridge->native_pme = 1; bridge->native_ltr = 1; + + /* + * Some systems (ACPI IORT, device-tree) declare ATS support at the host + * bridge, and clear this bit when ATS isn't supported. Others (ACPI + * DMAR and IVRS) declare ATS support with a smaller granularity, and + * need this bit set. + */ + bridge->ats_supported = 1; } struct pci_host_bridge *pci_alloc_host_bridge(size_t priv) diff --git a/include/linux/pci.h b/include/linux/pci.h index 3840a541a9de..9fe2e84d74d7 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -511,6 +511,7 @@ struct pci_host_bridge { unsigned int native_pme:1; /* OS may use PCIe PME */ unsigned int native_ltr:1; /* OS may use PCIe LTR */ unsigned int preserve_config:1; /* Preserve FW resource setup */ + unsigned int ats_supported:1; /* Resource alignment requirements */ resource_size_t (*align_resource)(struct pci_dev *dev,
Each vendor has their own way of describing whether a host bridge supports ATS. The Intel and AMD ACPI tables selectively enable or disable ATS per device or sub-tree, while Arm has a single bit for each host bridge. For those that need it, add an ats_supported bit to the host bridge structure. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> --- v1->v2: try to improve the comment --- drivers/pci/probe.c | 8 ++++++++ include/linux/pci.h | 1 + 2 files changed, 9 insertions(+)