@@ -758,7 +758,7 @@ void __init arch_init_irq(void)
/* Register the bus error interrupt. */
if (dec_interrupt[DEC_IRQ_BUS] >= 0 && busirq_handler) {
if (request_irq(dec_interrupt[DEC_IRQ_BUS], busirq_handler,
- busirq_flags, "bus error", NULL))
+ busirq_flags, "bus error", "bus error"))
pr_err("Failed to register bus error interrupt\n");
}
/* Register the HALT interrupt. */
@@ -292,7 +292,7 @@ int r4k_clockevent_init(void)
cp0_timer_irq_installed = 1;
- if (request_irq(irq, c0_compare_interrupt, flags, "timer", NULL))
+ if (request_irq(irq, c0_compare_interrupt, flags, "timer", cd))
pr_err("Failed to request irq %d (timer)\n", irq);
return 0;
@@ -109,7 +109,7 @@ void __init mach_init_irq(void)
/* setup north bridge irq (bonito) */
if (request_irq(LOONGSON_NORTH_BRIDGE_IRQ, ip6_action,
- IRQF_SHARED | IRQF_NO_THREAD, "cascade", NULL))
+ IRQF_SHARED | IRQF_NO_THREAD, "cascade", "cascade"))
pr_err("Failed to register north bridge cascade interrupt\n");
/* setup source bridge irq (i8259) */
if (request_irq(LOONGSON_SOUTH_BRIDGE_IRQ, no_action,
@@ -81,7 +81,7 @@ unsigned int get_c0_compare_int(void)
/* MIPS_MT modes may want timer for second VPE */
if ((get_current_vpe()) && !tim_installed) {
if (request_irq(MSP_INT_VPE1_TIMER, c0_compare_interrupt, flags,
- "timer", NULL))
+ "timer", "timer"))
pr_err("Failed to register timer interrupt\n");
tim_installed++;
}
@@ -223,7 +223,7 @@ void __init sni_a20r_irq_init(void)
sni_hwint = a20r_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
if (request_irq(SNI_A20R_IRQ_BASE + 3, sni_isa_irq_handler,
- IRQF_SHARED, "ISA", NULL))
+ IRQF_SHARED, "ISA", "ISA"))
pr_err("Failed to register ISA interrupt\n");
}
@@ -245,7 +245,7 @@ void __init sni_pcit_irq_init(void)
sni_hwint = sni_pcit_hwint;
change_c0_status(ST0_IM, IE_IRQ1);
if (request_irq(SNI_PCIT_INT_START + 6, sni_isa_irq_handler,
- IRQF_SHARED, "ISA", NULL))
+ IRQF_SHARED, "ISA", "ISA"))
pr_err("Failed to register ISA interrupt\n");
}
@@ -260,7 +260,7 @@ void __init sni_pcit_cplus_irq_init(void)
sni_hwint = sni_pcit_hwint_cplus;
change_c0_status(ST0_IM, IE_IRQ0);
if (request_irq(MIPS_CPU_IRQ_BASE + 3, sni_isa_irq_handler,
- IRQF_SHARED, "ISA", NULL))
+ IRQF_SHARED, "ISA", "ISA"))
pr_err("Failed to register ISA interrupt\n");
}
@@ -473,10 +473,10 @@ void __init sni_rm200_irq_init(void)
sni_hwint = sni_rm200_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
if (request_irq(SNI_RM200_INT_START + 0, sni_rm200_i8259A_irq_handler,
- IRQF_SHARED, "onboard ISA", NULL))
+ IRQF_SHARED, "onboard ISA", "onboard ISA"))
pr_err("Failed to register onboard ISA interrupt\n");
if (request_irq(SNI_RM200_INT_START + 1, sni_isa_irq_handler,
- IRQF_SHARED, "ISA", NULL))
+ IRQF_SHARED, "ISA", "ISA"))
pr_err("Failed to register ISA interrupt\n");
}
Recently all usages of setup_irq() was replaced by request_irq(). request_irq() does a few sanity checks that were not done in setup_irq(), if they fail irq registration will fail. One of the check is to ensure that non-NULL dev_id is passed in the case of shared irq. This caused malta on qemu to hang. Fix it by passing a dev_id to all request_irq()'s that are shared. Fixes: ac8fd122e070 ("MIPS: Replace setup_irq() by request_irq()") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> --- [ resending since in the archives not seen, apologies if duplicate ] Hi Thomas, i am assuming your next tree is immutable, hence referring to the SHA-ID of the original commit in your tree. Else if you prefer a fixup'ed patch, let me know, i will send v5 with this fixup over v4. REgards afzal arch/mips/dec/setup.c | 2 +- arch/mips/kernel/cevt-r4k.c | 2 +- arch/mips/loongson2ef/lemote-2f/irq.c | 2 +- arch/mips/pmcs-msp71xx/msp_time.c | 2 +- arch/mips/sni/a20r.c | 2 +- arch/mips/sni/pcit.c | 4 ++-- arch/mips/sni/rm200.c | 4 ++-- 7 files changed, 9 insertions(+), 9 deletions(-)