| Message ID | 20200313102534.5438-3-o.rempel@pengutronix.de (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 2d42fa311df749e847769a86748a8c2d20687973 |
| Headers | show |
| Series | properly define some of PHYs | expand |
On Fri, Mar 13, 2020 at 11:25:34AM +0100, Oleksij Rempel wrote: > The Atheros AR8035 PHY can be autodetected but can't use interrupt > support provided on this board. Define MDIO bus and the PHY node to make > it work properly. > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index 84b30bd6908f..05ee28388229 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -111,8 +111,22 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + phy-handle = <&rgmii_phy>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Atheros AR8035 PHY */ + rgmii_phy: ethernet-phy@4 { + reg = <4>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + }; + }; }; &hdmi {
The Atheros AR8035 PHY can be autodetected but can't use interrupt support provided on this board. Define MDIO bus and the PHY node to make it work properly. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boot/dts/imx6q-marsboard.dts | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)