diff mbox series

ARM: dts: rockchip: remove clock-frequency from saradc node rv1108

Message ID 20200313132646.10317-1-jbx6244@gmail.com (mailing list archive)
State Mainlined
Commit 5b9870acf62fd799b843d2caa38f2a9610c71c7d
Headers show
Series ARM: dts: rockchip: remove clock-frequency from saradc node rv1108 | expand

Commit Message

Johan Jonker March 13, 2020, 1:26 p.m. UTC
An experimental test with the command below gives these errors:

arch/arm/boot/dts/rv1108-elgin-r1.dt.yaml: adc@1038c000:
'clock-frequency'
does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm/boot/dts/rv1108-evb.dt.yaml: adc@1038c000:
'clock-frequency'
does not match any of the regexes: 'pinctrl-[0-9]+'

'clock-frequency' is not a valid property for a saradc node,
so remove it.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/iio/adc/
rockchip-saradc.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 arch/arm/boot/dts/rv1108.dtsi | 1 -
 1 file changed, 1 deletion(-)

Comments

Heiko Stübner March 17, 2020, 12:27 a.m. UTC | #1
Am Freitag, 13. März 2020, 14:26:46 CET schrieb Johan Jonker:
> An experimental test with the command below gives these errors:
> 
> arch/arm/boot/dts/rv1108-elgin-r1.dt.yaml: adc@1038c000:
> 'clock-frequency'
> does not match any of the regexes: 'pinctrl-[0-9]+'
> arch/arm/boot/dts/rv1108-evb.dt.yaml: adc@1038c000:
> 'clock-frequency'
> does not match any of the regexes: 'pinctrl-[0-9]+'
> 
> 'clock-frequency' is not a valid property for a saradc node,
> so remove it.
> 
> make ARCH=arm dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/iio/adc/
> rockchip-saradc.yaml
> 
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>

applied for 5.7

Thanks
Heiko
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 153868c62..f9cfe2c80 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -366,7 +366,6 @@ 
 		reg = <0x1038c000 0x100>;
 		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 		#io-channel-cells = <1>;
-		clock-frequency = <1000000>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
 		status = "disabled";