| Message ID | 20200313230513.123049-1-npcomplete13@gmail.com (mailing list archive) |
|---|---|
| State | Mainlined, archived |
| Headers | show |
| Series | [v2] arm64: dts: rockchip: Add Hugsun X99 IR receiver and power led | expand |
Am Samstag, 14. März 2020, 00:05:13 CET schrieb Vivek Unune: > - Add Hugsun X99 IR receiver and power led > - Remove pwm0 node as it interferes with power LED gpio > pwm0 is not used in factory firmware as well > > Tested with LibreElec linux-next-20200305 > > Signed-off-by: Vivek Unune <npcomplete13@gmail.com> I've applied this for 5.7, but did split the patch into two. One for the addition of the IR and a second for led. Please do similar for future patches. Thanks Heiko
On Tue, Mar 17, 2020 at 01:54:52AM +0100, Heiko Stuebner wrote: > Am Samstag, 14. März 2020, 00:05:13 CET schrieb Vivek Unune: > > - Add Hugsun X99 IR receiver and power led > > - Remove pwm0 node as it interferes with power LED gpio > > pwm0 is not used in factory firmware as well > > > > Tested with LibreElec linux-next-20200305 > > > > Signed-off-by: Vivek Unune <npcomplete13@gmail.com> > > I've applied this for 5.7, but did split the patch into two. > One for the addition of the IR and a second for led. > > Please do similar for future patches. > > Thanks > Heiko > > Hi Heiko, Much appriciated. I'll make sure to do that with my future patches Thanks, Vivek
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts index d69a613fb65a..df425e164a2e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts @@ -29,6 +29,26 @@ regulator-max-microvolt = <5000000>; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_rx>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&power_led_gpio>; + + led-0 { + label = "blue:power"; + gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "default-on"; + }; + }; + vcc_sys: vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -483,6 +503,18 @@ }; }; + ir { + ir_rx: ir-rx { + rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>; + }; + }; + + leds { + power_led_gpio: power-led-gpio { + rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = @@ -539,10 +572,6 @@ }; }; -&pwm0 { - status = "okay"; -}; - &pwm2 { status = "okay"; pinctrl-0 = <&pwm2_pin_pull_down>;
- Add Hugsun X99 IR receiver and power led - Remove pwm0 node as it interferes with power LED gpio pwm0 is not used in factory firmware as well Tested with LibreElec linux-next-20200305 Signed-off-by: Vivek Unune <npcomplete13@gmail.com> --- Changes in v2: - Changed led trigger from none to default-on - Changed led node name from power-led to led-0 --- .../boot/dts/rockchip/rk3399-hugsun-x99.dts | 37 +++++++++++++++++-- 1 file changed, 33 insertions(+), 4 deletions(-)