diff mbox series

[v2,5/5] ARM: dts: add Protonic RVT board

Message ID 20200319055636.7573-6-o.rempel@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series mainline Protonic boards | expand

Commit Message

Oleksij Rempel March 19, 2020, 5:56 a.m. UTC 
Protonic RVT is an internal development platform for a wireless ISObus
Virtual Terminal based on COTS tablets, and the predecessor of the WD2
platform.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/imx6dl-prtrvt.dts           | 108 ++++++++++++++++++
 3 files changed, 110 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-prtrvt.dts
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 424be1edf005..2e8a03ef5c95 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -168,6 +168,7 @@  properties:
               - emtrion,emcon-mx6-avari   # emCON-MX6S or emCON-MX6DL SoM on Avari Base
               - fsl,imx6dl-sabreauto      # i.MX6 DualLite/Solo SABRE Automotive Board
               - fsl,imx6dl-sabresd        # i.MX6 DualLite SABRE Smart Device Board
+              - prt,prtrvt                # Protonic RVT board
               - prt,prtvt7                # Protonic VT7 board
               - technologic,imx6dl-ts4900
               - technologic,imx6dl-ts7970
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e53abe1de259..afaccc9bc645 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -446,6 +446,7 @@  dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-nitrogen6x.dtb \
 	imx6dl-phytec-mira-rdk-nand.dtb \
 	imx6dl-phytec-pbab01.dtb \
+	imx6dl-prtrvt.dtb \
 	imx6dl-prtvt7.dtb \
 	imx6dl-rex-basic.dtb \
 	imx6dl-riotboard.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts
new file mode 100644
index 000000000000..fddc91b5a113
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts
@@ -0,0 +1,108 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+
+/ {
+	model = "Protonic RVT board";
+	compatible = "prt,prtrvt", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x10000000>;
+	};
+};
+
+&iomuxc {
+	prti6q {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SGTL5000 sys_mclk */
+				MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1	0x030b0
+				/* CAN1_SR + CAN2_SR GPIO outputs */
+				MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
+				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13	0x13070
+
+				/* CAN1_TERM */
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0
+				/* ITU656_nRESET */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
+
+				/* HW revision detect */
+				/* REV_ID0 */
+				MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
+				/* REV_ID1 */
+				MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
+				/* REV_ID2 */
+				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
+				/* REV_ID3 */
+				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
+				/* REV_ID4 */
+				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+			>;
+		};
+
+		pinctrl_leds: ledsgrp {
+			fsl,pins = <
+				/* DEBUG0 */
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				/* Not connected */
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC	0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
+			>;
+		};
+	};
+};
+
+&i2c3 {
+	rtc: pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&pwm1 {
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "disabled";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&uart5 {
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "disabled";
+};
+
+&can2 {
+	status = "disabled";
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&audmux {
+	status = "disabled";
+};
+
+&ipu1 {
+	status = "disabled";
+};