Message ID | 20200409204030.21330-1-rentao.bupt@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v4] usb: gadget: aspeed: improve vhub port irq handling | expand |
On Thu, 2020-04-09 at 13:40 -0700, rentao.bupt@gmail.com wrote: > From: Tao Ren <rentao.bupt@gmail.com> > > This patch evaluates vhub ports' irq mask before going through per- > port > irq handling one by one, which helps to speed up irq handling in case > there is no port interrupt. > > Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> > --- > Changes in v4: > - use simple for() loop as it runs faster than for_each_set_bit() > loop on aspeed BMCs. > Changes in v3: > - assign istat to (unsigned long) bitmap before calling > "for_each_set_bit_from". > Changes in v2: > - use "for_each_set_bit" to speed up port irq handling. > > drivers/usb/gadget/udc/aspeed-vhub/core.c | 12 +++++++----- > drivers/usb/gadget/udc/aspeed-vhub/vhub.h | 11 ++++++----- > 2 files changed, 13 insertions(+), 10 deletions(-) > > diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c > b/drivers/usb/gadget/udc/aspeed-vhub/core.c > index f8d35dd60c34..fb36bad2c0b7 100644 > --- a/drivers/usb/gadget/udc/aspeed-vhub/core.c > +++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c > @@ -134,11 +134,11 @@ static irqreturn_t ast_vhub_irq(int irq, void > *data) > } > > /* Handle device interrupts */ > - for (i = 0; i < vhub->max_ports; i++) { > - u32 dev_mask = VHUB_IRQ_DEVICE1 << i; > - > - if (istat & dev_mask) > - ast_vhub_dev_irq(&vhub->ports[i].dev); > + if (istat & vhub->port_irq_mask) { > + for (i = 0; i < vhub->max_ports; i++) { > + if (istat & VHUB_DEV_IRQ(i)) > + ast_vhub_dev_irq(&vhub->ports[i].dev); > + } > } > > /* Handle top-level vHub EP0 interrupts */ > @@ -332,6 +332,8 @@ static int ast_vhub_probe(struct platform_device > *pdev) > > spin_lock_init(&vhub->lock); > vhub->pdev = pdev; > + vhub->port_irq_mask = GENMASK(VHUB_IRQ_DEV1_BIT + vhub- > >max_ports - 1, > + VHUB_IRQ_DEV1_BIT); > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > vhub->regs = devm_ioremap_resource(&pdev->dev, res); > diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h > b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h > index fac79ef6d669..b80e3ddff797 100644 > --- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h > +++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h > @@ -51,14 +51,11 @@ > #define VHUB_CTRL_UPSTREAM_CONNECT (1 << 0) > > /* IER & ISR */ > +#define VHUB_IRQ_DEV1_BIT 9 > #define VHUB_IRQ_USB_CMD_DEADLOCK (1 << 18) > #define VHUB_IRQ_EP_POOL_NAK (1 << 17) > #define VHUB_IRQ_EP_POOL_ACK_STALL (1 << 16) > -#define VHUB_IRQ_DEVICE5 (1 << 13) > -#define VHUB_IRQ_DEVICE4 (1 << 12) > -#define VHUB_IRQ_DEVICE3 (1 << 11) > -#define VHUB_IRQ_DEVICE2 (1 << 10) > -#define VHUB_IRQ_DEVICE1 (1 << 9) > +#define VHUB_IRQ_DEVICE1 (1 << > (VHUB_IRQ_DEV1_BIT)) > #define VHUB_IRQ_BUS_RESUME (1 << 8) > #define VHUB_IRQ_BUS_SUSPEND (1 << 7) > #define VHUB_IRQ_BUS_RESET (1 << 6) > @@ -70,6 +67,9 @@ > #define VHUB_IRQ_HUB_EP0_SETUP (1 << 0) > #define VHUB_IRQ_ACK_ALL 0x1ff > > +/* Downstream device IRQ mask. */ > +#define VHUB_DEV_IRQ(n) (VHUB_IRQ_DEVIC > E1 << (n)) > + > /* SW reset reg */ > #define VHUB_SW_RESET_EP_POOL (1 << 9) > #define VHUB_SW_RESET_DMA_CONTROLLER (1 << 8) > @@ -402,6 +402,7 @@ struct ast_vhub { > /* Per-port info */ > struct ast_vhub_port *ports; > u32 max_ports; > + u32 port_irq_mask; > > /* Generic EP data structures */ > struct ast_vhub_ep *epns;
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c index f8d35dd60c34..fb36bad2c0b7 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/core.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c @@ -134,11 +134,11 @@ static irqreturn_t ast_vhub_irq(int irq, void *data) } /* Handle device interrupts */ - for (i = 0; i < vhub->max_ports; i++) { - u32 dev_mask = VHUB_IRQ_DEVICE1 << i; - - if (istat & dev_mask) - ast_vhub_dev_irq(&vhub->ports[i].dev); + if (istat & vhub->port_irq_mask) { + for (i = 0; i < vhub->max_ports; i++) { + if (istat & VHUB_DEV_IRQ(i)) + ast_vhub_dev_irq(&vhub->ports[i].dev); + } } /* Handle top-level vHub EP0 interrupts */ @@ -332,6 +332,8 @@ static int ast_vhub_probe(struct platform_device *pdev) spin_lock_init(&vhub->lock); vhub->pdev = pdev; + vhub->port_irq_mask = GENMASK(VHUB_IRQ_DEV1_BIT + vhub->max_ports - 1, + VHUB_IRQ_DEV1_BIT); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); vhub->regs = devm_ioremap_resource(&pdev->dev, res); diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h index fac79ef6d669..b80e3ddff797 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h +++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h @@ -51,14 +51,11 @@ #define VHUB_CTRL_UPSTREAM_CONNECT (1 << 0) /* IER & ISR */ +#define VHUB_IRQ_DEV1_BIT 9 #define VHUB_IRQ_USB_CMD_DEADLOCK (1 << 18) #define VHUB_IRQ_EP_POOL_NAK (1 << 17) #define VHUB_IRQ_EP_POOL_ACK_STALL (1 << 16) -#define VHUB_IRQ_DEVICE5 (1 << 13) -#define VHUB_IRQ_DEVICE4 (1 << 12) -#define VHUB_IRQ_DEVICE3 (1 << 11) -#define VHUB_IRQ_DEVICE2 (1 << 10) -#define VHUB_IRQ_DEVICE1 (1 << 9) +#define VHUB_IRQ_DEVICE1 (1 << (VHUB_IRQ_DEV1_BIT)) #define VHUB_IRQ_BUS_RESUME (1 << 8) #define VHUB_IRQ_BUS_SUSPEND (1 << 7) #define VHUB_IRQ_BUS_RESET (1 << 6) @@ -70,6 +67,9 @@ #define VHUB_IRQ_HUB_EP0_SETUP (1 << 0) #define VHUB_IRQ_ACK_ALL 0x1ff +/* Downstream device IRQ mask. */ +#define VHUB_DEV_IRQ(n) (VHUB_IRQ_DEVICE1 << (n)) + /* SW reset reg */ #define VHUB_SW_RESET_EP_POOL (1 << 9) #define VHUB_SW_RESET_DMA_CONTROLLER (1 << 8) @@ -402,6 +402,7 @@ struct ast_vhub { /* Per-port info */ struct ast_vhub_port *ports; u32 max_ports; + u32 port_irq_mask; /* Generic EP data structures */ struct ast_vhub_ep *epns;