From patchwork Fri Apr 10 16:43:20 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Cristian Birsan X-Patchwork-Id: 11483449 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 1CD9481 for ; Fri, 10 Apr 2020 16:44:25 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id E9FFF2078E for ; Fri, 10 Apr 2020 16:44:24 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="oOUeUjH1"; dkim=fail reason="signature verification failed" (2048-bit key) header.d=microchip.com header.i=@microchip.com header.b="VvwTrpSg" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org E9FFF2078E Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=microchip.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=I8h+yNSFpsWG7Ruh+mEOLN0P37J7f3VdmLCKxvekdLY=; b=oOUeUjH1wo3J54 9tfVQDpn4bjsM3/RNqTHP37e2AyBDcnTuVhz8POatZyY8DYLfDX+5FNsO9/IgHu1SDkdaSrY1usAG LfMtRuXB/hbDgPF0jz/1p3vnpqDALZcR2dPTyz5SntygBWOG+kLOgT3OeQ/yEyDO15FwFnf+y2eF6 80dMvzZtLpA0vjo+jMFuxSI9RWbnLax8YpVDj+qOd2IyzrZvCilLyIOXSl3IYzEsNQxSKTFFJc6L3 MiM5ZONeTI21Tgh0g0w1ilcVJilHnZSd+zvVafRoaWr8vDwIYHIMPGj21SktcoW1Cq8NVQuCP6RSw 0kFgEFMTYxysZ2+axszQ==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1jMwlO-0006Xk-95; Fri, 10 Apr 2020 16:44:18 +0000 Received: from esa6.microchip.iphmx.com ([216.71.154.253]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jMwl8-0006FP-TA for linux-arm-kernel@lists.infradead.org; Fri, 10 Apr 2020 16:44:05 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1586537042; x=1618073042; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=5kGkr4YKH3PXOGiQVVGM6yObHvomSXjRC5ZY5Ji5iDk=; b=VvwTrpSgA+lCo0wMqTpZNltRCjw/6xnFdERyt10WWDN676iaupEIkfil PlgZ+F+zeqmbpM4zduhgZPQA/mzJ//4vINMo2+1GhhivBvN6vkSSF6qJw /z4DBJ/Y3/BHtLsd2isPM6nf2rKVRfWdADbuPii9La9bLQqBkI6/gSzU2 UEM5kJ8BSSm3LhD3LT+ijJgPTZ7UDvN2//4tRzSPBDga6G3VtmpGGivEt k+1bgLVJgHSBKgIGv8viQ6my1XqLs8Nq0SjOiZNWUXUQ6bsToDfkUPjSm IfNUvmkdtBRN175dqC03xvNJ3ryeehTbzkbCWoUHnRDSq2w/T6R5I7AeW A==; IronPort-SDR: cRjvLoUVj8hgkoasCKW/WT3M2pmKcCmASalnKc0huGaxjx22is1kG50Qlu8bFzaXDV7jnZ2Llt qUO0vh6l+U/ZWMpu1MGp27vm3seQZa1a9vlejqP/cAKaxjRNpJVk6YMSfzV9GqWDe7FiY8QGye sGD874GHq64dS11r1ZdE4X0IgT5rv0Z4c7q+H4pW6dfTzAjFBLwa9P+rX3GTAKcYRMWfjtwwHq OTO5ir4lTdoLlY1ueacr2rjF4qNAwoCPJ7tnLmPNnbAIFCbu4CBq1hAwMJW5h2S9ywAYW5th4D /NI= X-IronPort-AV: E=Sophos;i="5.72,367,1580799600"; d="scan'208";a="8794044" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa6.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 10 Apr 2020 09:44:01 -0700 Received: from chn-vm-ex02.mchp-main.com (10.10.87.72) by chn-vm-ex02.mchp-main.com (10.10.87.72) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1713.5; Fri, 10 Apr 2020 09:43:56 -0700 Received: from cristi-P53.amer.actel.com (10.10.115.15) by chn-vm-ex02.mchp-main.com (10.10.85.144) with Microsoft SMTP Server id 15.1.1713.5 via Frontend Transport; Fri, 10 Apr 2020 09:43:54 -0700 From: To: , , , , , , , Subject: [PATCH 2/2] ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP Date: Fri, 10 Apr 2020 19:43:20 +0300 Message-ID: <20200410164320.7658-3-cristian.birsan@microchip.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200410164320.7658-1-cristian.birsan@microchip.com> References: <20200410164320.7658-1-cristian.birsan@microchip.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200410_094403_062179_E76B4A39 X-CRM114-Status: GOOD ( 15.68 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on bombadil.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [216.71.154.253 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Cristian Birsan Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org From: Cristian Birsan This is the addition of the new SAMA5D2 Industrial Connectivity Platform(ICP). Signed-off-by: Cristian Birsan --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-sama5d2_icp.dts | 797 +++++++++++++++++++++++++ 2 files changed, 798 insertions(+) create mode 100644 arch/arm/boot/dts/at91-sama5d2_icp.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d6546d2676b9..9631e5aa3cd0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -55,6 +55,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-nattis-2-natte-2.dtb \ at91-sama5d27_som1_ek.dtb \ at91-sama5d27_wlsom1_ek.dtb \ + at91-sama5d2_icp.dtb \ at91-sama5d2_ptc_ek.dtb \ at91-sama5d2_xplained.dtb \ at91-sama5d3_xplained.dtb \ diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts new file mode 100644 index 000000000000..cc9fa700eafb --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -0,0 +1,797 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sama5d2_icp.dts - Device Tree file for SAMA5D2-ICP board + * + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries + * + * Author: Radu Pirea & Razvan Stefanescu, + * Codrin Ciubotariu , + * Cristian Birsan + */ +/dts-v1/; +#include "sama5d2.dtsi" +#include "sama5d2-pinfunc.h" +#include +#include + +/ { + model = "Microchip SAMA5D2-ICP"; + compatible = "microchip,sama5d2-icp", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; + + aliases { + serial0 = &uart0; /* debug uart0 + mikro BUS 1 */ + serial1 = &uart1; /* mikro BUS 3 */ + serial3 = &uart3; /* mikro BUS 2 */ + serial5 = &uart5; /* flx2 */ + i2c0 = &i2c0; + i2c1 = &i2c1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + status = "okay"; + + sw4 { + label = "USER_PB1"; + gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_gpio_default>; + status = "okay"; /* conflict with pwm0 */ + + red { + label = "red"; + gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>; + }; + + green { + label = "green"; + gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; + }; + + blue { + label = "blue"; + gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&adc { + vddana-supply = <&vdd_io_reg>; + vref-supply = <&vdd_io_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; + status = "okay"; +}; + +&flx0 { /* mikrobus2 spi */ + atmel,flexcom-mode = ; + status = "okay"; + + spi2: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + clock-names = "spi_clk"; + cs-gpios = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus2_spi &pinctrl_ksz_spi_cs>; + atmel,fifo-size = <16>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + switch0: ksz8563@0 { + compatible = "microchip,ksz8563"; + reg = <0>; + phy-mode = "mii"; + reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>; + + spi-max-frequency = <500000>; + spi-cpha; + spi-cpol; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "cpu"; + ethernet = <&macb0>; + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&flx2 { + atmel,flexcom-mode = ; + status = "okay"; + + uart5: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(15))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(16))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; + clock-names = "usart"; + pinctrl-0 = <&pinctrl_flx2_default>; + pinctrl-names = "default"; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; /* Conflict w/ qspi1. */ + }; +}; + +&flx3 { /* mikrobus1 spi */ + atmel,flexcom-mode = ; + status = "okay"; + + spi3: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "spi_clk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>; + atmel,fifo-size = <16>; + status = "okay"; + }; +}; + +&flx4 { + atmel,flexcom-mode = ; + status = "okay"; + + i2c2: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <0>, <0>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + atmel,fifo-size = <16>; + status = "okay"; + + mcp16502@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + status = "okay"; + lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>; + + regulators { + vdd_io_reg: VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + }; + }; + }; +}; + +&i2c0 { /* mikrobus i2c */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus_i2c>; + status = "okay"; +}; + +&i2c1 { + dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <16>; + status = "okay"; + }; + + eeprom@52 { + compatible = "atmel,24c32"; + reg = <0x52>; + pagesize = <16>; + status = "disabled"; + }; + + eeprom@53 { + compatible = "atmel,24c32"; + reg = <0x53>; + pagesize = <16>; + status = "disabled"; + }; +}; + +&macb0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq &pinctrl_macb0_rst>; + phy-mode = "mii"; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; +}; + +&pioA { + pinctrl_adc_default: adc_default { + pinmux = , + , + ; + bias-disable; + }; + + /* + * The ADTRG pin can work on any edge type. + * In here it's being pulled up, so need to + * connect it to ground to get an edge e.g. + * Trigger can be configured on falling, rise + * or any edge, and the pull-up can be changed + * to pull-down or left floating according to + * needs. + */ + pinctrl_adtrg_default: adtrg_default { + pinmux = ; + bias-pull-up; + }; + + pinctrl_flx4_default: flx4_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_can0_default: can0_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_can1_default: can1_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_i2c1_default: i2c1_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_key_gpio_default: key_gpio_default { + pinmux = ; + bias-pull-up; + }; + + pinctrl_led_gpio_default: led_gpio_default { + pinmux = , + , + ; + bias-pull-up; + }; + + pinctrl_qspi1_default: qspi1_default { + pinmux = , + , + , + , + , + ; + bias-disable; + }; + + pinctrl_sdmmc0_default: sdmmc0_default { + cmd_data { + pinmux = , + , + , + , + ; + bias-disable; + }; + + ck_cd { + pinmux = , + ; + bias-disable; + }; + }; + + pinctrl_sdmmc1_default: sdmmc1_default { + cmd_data { + pinmux = , + , + , + ; + bias-disable; + }; + + ck_cd { + pinmux = , + ; + bias-disable; + }; + }; + + pinctrl_mikrobus_i2c: mikrobus_i2c { + pinmux = , + ; + bias-disable; + }; + + pinctrl_mikrobus1_an: mikrobus1_an { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus1_rst: mikrobus1_rst { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus1_spi: mikrobus1_spi { + pinmux = , + , + ; + bias-disable; + }; + + pinctrl_mikrobus1_pwm: mikrobus1_pwm { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus1_int: mikrobus1_int { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus1_uart: mikrobus1_uart { + pinmux = , + ; + bias-disable; + }; + + pinctrl_mikrobus2_an: mikrobus2_an { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus2_rst: mikrobus2_rst { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus2_spi: mikrobus2_spi { + pinmux = , + , + ; + bias-disable; + }; + + pinctrl_ksz_spi_cs: ksz_spi_cs { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus2_pwm: mikrobus2_pwm { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus2_int: mikrobus2_int { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus2_uart: mikrobus2_uart { + pinmux = , + ; + bias-disable; + }; + + pinctrl_mikrobus3_an: mikrobus3_an { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus3_rst: mikrobus3_rst { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus3_spi_cs: mikrobus3_spi_cs { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus3_spi: mikrobus3_spi { + pinmux = , + , + ; + bias-disable; + }; + + pinctrl_mikrobus3_pwm: mikrobus3_pwm { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus3_int: mikrobus3_int { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus3_uart: mikrobus3_uart { + pinmux = , + ; + bias-disable; + }; + + pinctrl_usb_default: usb_default { + pinmux = ; + bias-disable; + }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = ; + bias-disable; + }; + + pinctrl_pwm0_pwm2_default: pwm0_pwm2_default { + pinmux = , + ; + bias-pull-up; + }; + + pinctrl_macb0_default: macb0_default { + pinmux = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + bias-disable; + }; + + pinctrl_macb0_phy_irq: macb0_phy_irq { + pinmux = ; + bias-disable; + }; + + pinctrl_macb0_rst: macb0_sw_rst { + pinmux = ; + bias-disable; + }; + + pinctrl_flx2_default: flx2_default { + pinmux = , + , + , + ; + bias-disable; + }; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm2_default>; + status = "disabled"; /* conflict with leds, HSIC */ +}; + +&qspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi1_default>; + status = "disabled"; /* Conflict with wilc_pwrseq, flx2 */ + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + + at91bootstrap@0 { + label = "qspi: at91bootstrap"; + reg = <0x00000000 0x00040000>; + }; + + bootloader@40000 { + label = "qspi: bootloader"; + reg = <0x00040000 0x000c0000>; + }; + + bootloaderenvred@100000 { + label = "qspi: bootloader env redundant"; + reg = <0x00100000 0x00040000>; + }; + + bootloaderenv@140000 { + label = "qspi: bootloader env"; + reg = <0x00140000 0x00040000>; + }; + + dtb@180000 { + label = "qspi: device tree"; + reg = <0x00180000 0x00080000>; + }; + + kernel@200000 { + label = "qspi: kernel"; + reg = <0x00200000 0x00600000>; + }; + }; +}; + +&sdmmc0 { + no-1-8-v; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + status = "okay"; +}; + +&shutdown_controller { + atmel,shdwc-debouncer = <976>; + atmel,wakeup-rtc-timer; + + input@0 { + reg = <0>; + atmel,wakeup-type = "low"; + }; +}; + +&spi0 { /* mikrobus3 spi */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus3_spi &pinctrl_mikrobus3_spi_cs>; + status = "okay"; +}; + +&tcb0 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus3_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus2_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&usb0 { + atmel,vbus-gpio = <&pioA PIN_PD23 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; +}; + +&usb1 { + num-ports = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; +}; + +&usb2 { + phy_type = "hsic"; + status = "okay"; +}; + +&watchdog { + status = "okay"; +};