| Message ID | 20200416155720.2360443-7-enric.balletbo@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge | expand |
Hi Enric, Thank you for the patch. On Thu, Apr 16, 2020 at 05:57:18PM +0200, Enric Balletbo i Serra wrote: > Replace the manual panel handling code by a drm_panel_bridge. This > simplifies the driver and allows all components in the display pipeline > to be treated as bridges, paving the way to generic connector handling. > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > --- > > Changes in v2: > - Do not set connector_type for panel here. (Sam Ravnborg) > > drivers/gpu/drm/mediatek/mtk_dsi.c | 177 ++++------------------------- > 1 file changed, 19 insertions(+), 158 deletions(-) > > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c > index 48361c1e9f34..44718fa3d1ca 100644 > --- a/drivers/gpu/drm/mediatek/mtk_dsi.c > +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c > @@ -182,8 +182,7 @@ struct mtk_dsi { > struct mipi_dsi_host host; > struct drm_encoder encoder; > struct drm_bridge bridge; > - struct drm_connector conn; > - struct drm_panel *panel; > + struct drm_bridge *panel_bridge; I think you can use the next_bridge field to store the panel bridge, it will simplify the code a bit in mtk_dsi_bridge_attach(). > struct drm_bridge *next_bridge; > struct phy *phy; > > @@ -212,11 +211,6 @@ static inline struct mtk_dsi *bridge_to_dsi(struct drm_bridge *b) > return container_of(b, struct mtk_dsi, bridge); > } > > -static inline struct mtk_dsi *connector_to_dsi(struct drm_connector *c) > -{ > - return container_of(c, struct mtk_dsi, conn); > -} > - > static inline struct mtk_dsi *host_to_dsi(struct mipi_dsi_host *h) > { > return container_of(h, struct mtk_dsi, host); > @@ -682,16 +676,7 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi) > mtk_dsi_lane0_ulp_mode_leave(dsi); > mtk_dsi_clk_hs_mode(dsi, 0); > > - if (dsi->panel) { > - if (drm_panel_prepare(dsi->panel)) { > - DRM_ERROR("failed to prepare the panel\n"); > - goto err_disable_digital_clk; > - } > - } > - > return 0; > -err_disable_digital_clk: > - clk_disable_unprepare(dsi->digital_clk); > err_disable_engine_clk: > clk_disable_unprepare(dsi->engine_clk); > err_phy_power_off: > @@ -718,15 +703,7 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi) > */ > mtk_dsi_stop(dsi); > > - if (!mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500)) { > - if (dsi->panel) { > - if (drm_panel_unprepare(dsi->panel)) { > - DRM_ERROR("failed to unprepare the panel\n"); > - return; > - } > - } > - } > - > + mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500); > mtk_dsi_reset_engine(dsi); > mtk_dsi_lane0_ulp_mode_enter(dsi); > mtk_dsi_clk_ulp_mode_enter(dsi); > @@ -757,19 +734,7 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi) > > mtk_dsi_start(dsi); > > - if (dsi->panel) { > - if (drm_panel_enable(dsi->panel)) { > - DRM_ERROR("failed to enable the panel\n"); > - goto err_dsi_power_off; > - } > - } > - > dsi->enabled = true; > - > - return; > -err_dsi_power_off: > - mtk_dsi_stop(dsi); > - mtk_dsi_poweroff(dsi); > } > > static void mtk_output_dsi_disable(struct mtk_dsi *dsi) > @@ -777,34 +742,24 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi) > if (!dsi->enabled) > return; > > - if (dsi->panel) { > - if (drm_panel_disable(dsi->panel)) { > - DRM_ERROR("failed to disable the panel\n"); > - return; > - } > - } > - > mtk_dsi_poweroff(dsi); > > dsi->enabled = false; > } > > -static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi); > -static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi); > - > static int mtk_dsi_bridge_attach(struct drm_bridge *bridge, > enum drm_bridge_attach_flags flags) > { > struct mtk_dsi *dsi = bridge_to_dsi(bridge); > + struct drm_bridge *next; > > - return mtk_dsi_create_conn_enc(bridge->dev, dsi); > -} > - > -static void mtk_dsi_bridge_detach(struct drm_bridge *bridge) > -{ > - struct mtk_dsi *dsi = bridge_to_dsi(bridge); > + if (dsi->next_bridge) > + next = dsi->next_bridge; > + else > + next = dsi->panel_bridge; > > - mtk_dsi_destroy_conn_enc(dsi); > + /* Attach the panel or bridge to the dsi bridge */ > + return drm_bridge_attach(bridge->encoder, next, &dsi->bridge, flags); > } > > static void mtk_dsi_bridge_mode_set(struct drm_bridge *bridge, > @@ -830,101 +785,13 @@ static void mtk_dsi_bridge_enable(struct drm_bridge *bridge) > mtk_output_dsi_enable(dsi); > } > > -static int mtk_dsi_connector_get_modes(struct drm_connector *connector) > -{ > - struct mtk_dsi *dsi = connector_to_dsi(connector); > - > - return drm_panel_get_modes(dsi->panel, connector); > -} > - > static const struct drm_bridge_funcs mtk_dsi_bridge_funcs = { > .attach = mtk_dsi_bridge_attach, > - .detach = mtk_dsi_bridge_detach, > .disable = mtk_dsi_bridge_disable, > .enable = mtk_dsi_bridge_enable, > .mode_set = mtk_dsi_bridge_mode_set, > }; > > -static const struct drm_connector_funcs mtk_dsi_connector_funcs = { > - .fill_modes = drm_helper_probe_single_connector_modes, > - .destroy = drm_connector_cleanup, > - .reset = drm_atomic_helper_connector_reset, > - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > -}; > - > -static const struct drm_connector_helper_funcs > - mtk_dsi_connector_helper_funcs = { > - .get_modes = mtk_dsi_connector_get_modes, > -}; > - > -static int mtk_dsi_create_connector(struct drm_device *drm, struct mtk_dsi *dsi) > -{ > - int ret; > - > - ret = drm_connector_init(drm, &dsi->conn, &mtk_dsi_connector_funcs, > - DRM_MODE_CONNECTOR_DSI); > - if (ret) { > - DRM_ERROR("Failed to connector init to drm\n"); > - return ret; > - } > - > - drm_connector_helper_add(&dsi->conn, &mtk_dsi_connector_helper_funcs); > - > - dsi->conn.dpms = DRM_MODE_DPMS_OFF; > - drm_connector_attach_encoder(&dsi->conn, &dsi->encoder); > - > - if (dsi->panel) { > - ret = drm_panel_attach(dsi->panel, &dsi->conn); > - if (ret) { > - DRM_ERROR("Failed to attach panel to drm\n"); > - goto err_connector_cleanup; > - } > - } > - > - return 0; > - > -err_connector_cleanup: > - drm_connector_cleanup(&dsi->conn); > - return ret; > -} > - > -static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi) > -{ > - int ret; > - > - /* If there's a bridge, attach to it and let it create the connector */ > - if (dsi->next_bridge) { > - ret = drm_bridge_attach(&dsi->encoder, dsi->next_bridge, NULL, > - 0); > - if (ret) { > - DRM_ERROR("Failed to attach bridge to drm\n"); > - goto err_encoder_cleanup; > - } > - } else { > - /* Otherwise create our own connector and attach to a panel */ > - ret = mtk_dsi_create_connector(drm, dsi); > - if (ret) > - goto err_encoder_cleanup; > - } > - > - return 0; > - > -err_encoder_cleanup: > - drm_encoder_cleanup(&dsi->encoder); > - return ret; > -} > - > -static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi) > -{ > - drm_encoder_cleanup(&dsi->encoder); > - /* Skip connector cleanup if creation was delegated to the bridge */ > - if (dsi->conn.dev) > - drm_connector_cleanup(&dsi->conn); > - if (dsi->panel) > - drm_panel_detach(dsi->panel); > -} > - > static void mtk_dsi_ddp_start(struct mtk_ddp_comp *comp) > { > struct mtk_dsi *dsi = container_of(comp, struct mtk_dsi, ddp_comp); > @@ -953,20 +820,6 @@ static int mtk_dsi_host_attach(struct mipi_dsi_host *host, > dsi->format = device->format; > dsi->mode_flags = device->mode_flags; > > - if (dsi->conn.dev) > - drm_helper_hpd_irq_event(dsi->conn.dev); > - > - return 0; > -} > - > -static int mtk_dsi_host_detach(struct mipi_dsi_host *host, > - struct mipi_dsi_device *device) > -{ > - struct mtk_dsi *dsi = host_to_dsi(host); > - > - if (dsi->conn.dev) > - drm_helper_hpd_irq_event(dsi->conn.dev); > - > return 0; > } > > @@ -1110,7 +963,6 @@ static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host, > > static const struct mipi_dsi_host_ops mtk_dsi_ops = { > .attach = mtk_dsi_host_attach, > - .detach = mtk_dsi_host_detach, > .transfer = mtk_dsi_host_transfer, > }; > > @@ -1184,6 +1036,7 @@ static int mtk_dsi_probe(struct platform_device *pdev) > { > struct mtk_dsi *dsi; > struct device *dev = &pdev->dev; > + struct drm_panel *panel; > struct resource *regs; > int irq_num; > int comp_id; > @@ -1202,10 +1055,18 @@ static int mtk_dsi_probe(struct platform_device *pdev) > } > > ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, > - &dsi->panel, &dsi->next_bridge); > + &panel, &dsi->next_bridge); > if (ret) > goto err_unregister_host; > > + if (panel) { > + dsi->panel_bridge = devm_drm_panel_bridge_add(dev, panel); devm_drm_panel_bridge_add() can also return NULL on errors, so you need IS_ERR_OR_NULL() below (and a special case to give ret a negative value when the result is NULL). Or maybe it would be best to fix devm_drm_panel_bridge_add() to always return an error pointer. With this fixed, Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > + if (IS_ERR(dsi->panel_bridge)) { > + ret = PTR_ERR(dsi->panel_bridge); > + goto err_unregister_host; > + } > + } > + > dsi->driver_data = of_device_get_match_data(dev); > > dsi->engine_clk = devm_clk_get(dev, "engine");
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c index 48361c1e9f34..44718fa3d1ca 100644 --- a/drivers/gpu/drm/mediatek/mtk_dsi.c +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c @@ -182,8 +182,7 @@ struct mtk_dsi { struct mipi_dsi_host host; struct drm_encoder encoder; struct drm_bridge bridge; - struct drm_connector conn; - struct drm_panel *panel; + struct drm_bridge *panel_bridge; struct drm_bridge *next_bridge; struct phy *phy; @@ -212,11 +211,6 @@ static inline struct mtk_dsi *bridge_to_dsi(struct drm_bridge *b) return container_of(b, struct mtk_dsi, bridge); } -static inline struct mtk_dsi *connector_to_dsi(struct drm_connector *c) -{ - return container_of(c, struct mtk_dsi, conn); -} - static inline struct mtk_dsi *host_to_dsi(struct mipi_dsi_host *h) { return container_of(h, struct mtk_dsi, host); @@ -682,16 +676,7 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi) mtk_dsi_lane0_ulp_mode_leave(dsi); mtk_dsi_clk_hs_mode(dsi, 0); - if (dsi->panel) { - if (drm_panel_prepare(dsi->panel)) { - DRM_ERROR("failed to prepare the panel\n"); - goto err_disable_digital_clk; - } - } - return 0; -err_disable_digital_clk: - clk_disable_unprepare(dsi->digital_clk); err_disable_engine_clk: clk_disable_unprepare(dsi->engine_clk); err_phy_power_off: @@ -718,15 +703,7 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi) */ mtk_dsi_stop(dsi); - if (!mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500)) { - if (dsi->panel) { - if (drm_panel_unprepare(dsi->panel)) { - DRM_ERROR("failed to unprepare the panel\n"); - return; - } - } - } - + mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500); mtk_dsi_reset_engine(dsi); mtk_dsi_lane0_ulp_mode_enter(dsi); mtk_dsi_clk_ulp_mode_enter(dsi); @@ -757,19 +734,7 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi) mtk_dsi_start(dsi); - if (dsi->panel) { - if (drm_panel_enable(dsi->panel)) { - DRM_ERROR("failed to enable the panel\n"); - goto err_dsi_power_off; - } - } - dsi->enabled = true; - - return; -err_dsi_power_off: - mtk_dsi_stop(dsi); - mtk_dsi_poweroff(dsi); } static void mtk_output_dsi_disable(struct mtk_dsi *dsi) @@ -777,34 +742,24 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi) if (!dsi->enabled) return; - if (dsi->panel) { - if (drm_panel_disable(dsi->panel)) { - DRM_ERROR("failed to disable the panel\n"); - return; - } - } - mtk_dsi_poweroff(dsi); dsi->enabled = false; } -static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi); -static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi); - static int mtk_dsi_bridge_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags) { struct mtk_dsi *dsi = bridge_to_dsi(bridge); + struct drm_bridge *next; - return mtk_dsi_create_conn_enc(bridge->dev, dsi); -} - -static void mtk_dsi_bridge_detach(struct drm_bridge *bridge) -{ - struct mtk_dsi *dsi = bridge_to_dsi(bridge); + if (dsi->next_bridge) + next = dsi->next_bridge; + else + next = dsi->panel_bridge; - mtk_dsi_destroy_conn_enc(dsi); + /* Attach the panel or bridge to the dsi bridge */ + return drm_bridge_attach(bridge->encoder, next, &dsi->bridge, flags); } static void mtk_dsi_bridge_mode_set(struct drm_bridge *bridge, @@ -830,101 +785,13 @@ static void mtk_dsi_bridge_enable(struct drm_bridge *bridge) mtk_output_dsi_enable(dsi); } -static int mtk_dsi_connector_get_modes(struct drm_connector *connector) -{ - struct mtk_dsi *dsi = connector_to_dsi(connector); - - return drm_panel_get_modes(dsi->panel, connector); -} - static const struct drm_bridge_funcs mtk_dsi_bridge_funcs = { .attach = mtk_dsi_bridge_attach, - .detach = mtk_dsi_bridge_detach, .disable = mtk_dsi_bridge_disable, .enable = mtk_dsi_bridge_enable, .mode_set = mtk_dsi_bridge_mode_set, }; -static const struct drm_connector_funcs mtk_dsi_connector_funcs = { - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = drm_connector_cleanup, - .reset = drm_atomic_helper_connector_reset, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; - -static const struct drm_connector_helper_funcs - mtk_dsi_connector_helper_funcs = { - .get_modes = mtk_dsi_connector_get_modes, -}; - -static int mtk_dsi_create_connector(struct drm_device *drm, struct mtk_dsi *dsi) -{ - int ret; - - ret = drm_connector_init(drm, &dsi->conn, &mtk_dsi_connector_funcs, - DRM_MODE_CONNECTOR_DSI); - if (ret) { - DRM_ERROR("Failed to connector init to drm\n"); - return ret; - } - - drm_connector_helper_add(&dsi->conn, &mtk_dsi_connector_helper_funcs); - - dsi->conn.dpms = DRM_MODE_DPMS_OFF; - drm_connector_attach_encoder(&dsi->conn, &dsi->encoder); - - if (dsi->panel) { - ret = drm_panel_attach(dsi->panel, &dsi->conn); - if (ret) { - DRM_ERROR("Failed to attach panel to drm\n"); - goto err_connector_cleanup; - } - } - - return 0; - -err_connector_cleanup: - drm_connector_cleanup(&dsi->conn); - return ret; -} - -static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi) -{ - int ret; - - /* If there's a bridge, attach to it and let it create the connector */ - if (dsi->next_bridge) { - ret = drm_bridge_attach(&dsi->encoder, dsi->next_bridge, NULL, - 0); - if (ret) { - DRM_ERROR("Failed to attach bridge to drm\n"); - goto err_encoder_cleanup; - } - } else { - /* Otherwise create our own connector and attach to a panel */ - ret = mtk_dsi_create_connector(drm, dsi); - if (ret) - goto err_encoder_cleanup; - } - - return 0; - -err_encoder_cleanup: - drm_encoder_cleanup(&dsi->encoder); - return ret; -} - -static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi) -{ - drm_encoder_cleanup(&dsi->encoder); - /* Skip connector cleanup if creation was delegated to the bridge */ - if (dsi->conn.dev) - drm_connector_cleanup(&dsi->conn); - if (dsi->panel) - drm_panel_detach(dsi->panel); -} - static void mtk_dsi_ddp_start(struct mtk_ddp_comp *comp) { struct mtk_dsi *dsi = container_of(comp, struct mtk_dsi, ddp_comp); @@ -953,20 +820,6 @@ static int mtk_dsi_host_attach(struct mipi_dsi_host *host, dsi->format = device->format; dsi->mode_flags = device->mode_flags; - if (dsi->conn.dev) - drm_helper_hpd_irq_event(dsi->conn.dev); - - return 0; -} - -static int mtk_dsi_host_detach(struct mipi_dsi_host *host, - struct mipi_dsi_device *device) -{ - struct mtk_dsi *dsi = host_to_dsi(host); - - if (dsi->conn.dev) - drm_helper_hpd_irq_event(dsi->conn.dev); - return 0; } @@ -1110,7 +963,6 @@ static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host, static const struct mipi_dsi_host_ops mtk_dsi_ops = { .attach = mtk_dsi_host_attach, - .detach = mtk_dsi_host_detach, .transfer = mtk_dsi_host_transfer, }; @@ -1184,6 +1036,7 @@ static int mtk_dsi_probe(struct platform_device *pdev) { struct mtk_dsi *dsi; struct device *dev = &pdev->dev; + struct drm_panel *panel; struct resource *regs; int irq_num; int comp_id; @@ -1202,10 +1055,18 @@ static int mtk_dsi_probe(struct platform_device *pdev) } ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, - &dsi->panel, &dsi->next_bridge); + &panel, &dsi->next_bridge); if (ret) goto err_unregister_host; + if (panel) { + dsi->panel_bridge = devm_drm_panel_bridge_add(dev, panel); + if (IS_ERR(dsi->panel_bridge)) { + ret = PTR_ERR(dsi->panel_bridge); + goto err_unregister_host; + } + } + dsi->driver_data = of_device_get_match_data(dev); dsi->engine_clk = devm_clk_get(dev, "engine");
Replace the manual panel handling code by a drm_panel_bridge. This simplifies the driver and allows all components in the display pipeline to be treated as bridges, paving the way to generic connector handling. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> --- Changes in v2: - Do not set connector_type for panel here. (Sam Ravnborg) drivers/gpu/drm/mediatek/mtk_dsi.c | 177 ++++------------------------- 1 file changed, 19 insertions(+), 158 deletions(-)