diff mbox series

[03/17] ARM: dts: DRA74x: Add DSP2 processor device node

Message ID 20200424151244.3225-4-t-kristo@ti.com (mailing list archive)
State Mainlined
Commit 78aae49a23ebe8b5e7a3e2876e4d114d43ac8bbb
Headers show
Series ARM: dts: dra7/am57xx: remoteproc support | expand

Commit Message

Tero Kristo April 24, 2020, 3:12 p.m. UTC 
From: Suman Anna <s-anna@ti.com>

The DRA7xx family of SoCs can contain upto two identical DSP
processor subsystems. The second DSP processor subsystem is
present only on the DRA74x/DRA76x variants. The processor
device DT node has therefore been added in disabled state for
this processor subsystem in the DRA74x specific DTS file.

NOTE:
1. The node does not have any mailboxes, timers or CMA region
   assigned, they should be added in the respective board dts
   files.
2. The node should also be enabled as per the individual product
   configuration in the corresponding board dts files.

Signed-off-by: Suman Anna <s-anna@ti.com>
[t-kristo@ti.com: converted to support ti-sysc from legacy hwmod]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/dra74x.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 7b1c61298253..94ba80769001 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -124,6 +124,20 @@ 
 				ti,syscon-mmuconfig = <&dsp2_system 0x1>;
 			};
 		};
+
+		dsp2: dsp@41000000 {
+			compatible = "ti,dra7-dsp";
+			reg = <0x41000000 0x48000>,
+			      <0x41600000 0x8000>,
+			      <0x41700000 0x8000>;
+			reg-names = "l2ram", "l1pram", "l1dram";
+			ti,bootreg = <&scm_conf 0x560 10>;
+			iommus = <&mmu0_dsp2>, <&mmu1_dsp2>;
+			status = "disabled";
+			resets = <&prm_dsp2 0>;
+			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+			firmware-name = "dra7-dsp2-fw.xe66";
+		};
 	};
 };