diff mbox series

dt-bindings: usb: dwc2: add power-domains property

Message ID 20200425170833.26718-1-jbx6244@gmail.com (mailing list archive)
State Mainlined
Commit 0b7140098667b3b50b8c5431c92ea94c0f9a00bd
Headers show
Series dt-bindings: usb: dwc2: add power-domains property | expand

Commit Message

Johan Jonker April 25, 2020, 5:08 p.m. UTC
A test with the command below gives this error:

arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: usb@ff300000:
'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'

With the conversion to yaml it also filters things
in a node that are used by other drivers like
'power-domains' for Rockchip px30 usb nodes,
so add them to 'dwc2.yaml'.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 Documentation/devicetree/bindings/usb/dwc2.yaml | 3 +++
 1 file changed, 3 insertions(+)

Comments

Rob Herring (Arm) May 11, 2020, 10:25 p.m. UTC | #1
On Sat, 25 Apr 2020 19:08:33 +0200, Johan Jonker wrote:
> A test with the command below gives this error:
> 
> arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: usb@ff300000:
> 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
> 
> With the conversion to yaml it also filters things
> in a node that are used by other drivers like
> 'power-domains' for Rockchip px30 usb nodes,
> so add them to 'dwc2.yaml'.
> 
> make ARCH=arm64 dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml
> 
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
>  Documentation/devicetree/bindings/usb/dwc2.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 

Applied, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index fb2f62aef..9352a8ef6 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -78,6 +78,9 @@  properties:
   phy-names:
     const: usb2-phy
 
+  power-domains:
+    maxItems: 1
+
   vbus-supply:
     description: reference to the VBUS regulator. Depending on the current mode
       this is enabled (in "host" mode") or disabled (in "peripheral" mode). The