@@ -28,14 +28,14 @@
leds {
compatible = "gpio-leds";
- power {
+ power_led: led-0 {
label = "firefly:red:power";
linux,default-trigger = "ir-power-click";
default-state = "on";
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
};
- user {
+ user_led: led-1 {
label = "firefly:blue:user";
linux,default-trigger = "ir-user-click";
default-state = "off";
@@ -128,9 +128,9 @@
leds: gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "led_pins";
- pinctrl-0 = <&led_pins>;
+ pinctrl-0 = <&blue_led_pin>;
- led-0 {
+ blue_led: led-0 {
label = "blue:heartbeat";
gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@@ -528,7 +528,7 @@
};
leds {
- led_pins: led-pins {
+ blue_led_pin: blue-led-pin {
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -86,7 +86,7 @@
leds {
compatible = "gpio-leds";
- power {
+ power_led: led-0 {
label = "firefly:blue:power";
linux,default-trigger = "heartbeat";
gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
@@ -94,7 +94,7 @@
mode = <0x23>;
};
- user {
+ user_led: led-1 {
label = "firefly:yellow:user";
linux,default-trigger = "mmc1";
gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
@@ -73,12 +73,12 @@
leds {
compatible = "gpio-leds";
- power {
+ power_led: led-0 {
gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "mmc0";
};
- standby {
+ standby_led: led-1 {
gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
@@ -50,13 +50,13 @@
leds: gpio-leds {
compatible = "gpio-leds";
- blue {
+ blue_led: led-0 {
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
label = "geekbox:blue:led";
default-state = "on";
};
- red {
+ red_led: led-1 {
gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
label = "geekbox:red:led";
default-state = "off";
@@ -50,7 +50,7 @@
leds: gpio-leds {
compatible = "gpio-leds";
- red {
+ red_led: led-0 {
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
label = "orion:red:led";
pinctrl-names = "default";
@@ -58,7 +58,7 @@
default-state = "on";
};
- blue {
+ blue_led: led-1 {
gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
label = "orion:blue:led";
pinctrl-names = "default";
@@ -43,7 +43,7 @@
leds: gpio-leds {
compatible = "gpio-leds";
- work {
+ work_led: led-0 {
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
label = "r88:green:led";
pinctrl-names = "default";
@@ -27,42 +27,43 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
- <&user_led4>, <&wlan_led>, <&bt_led>;
+ pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
+ <&user_led3_pin>, <&user_led4_pin>,
+ <&wlan_led_pin>, <&bt_led_pin>;
- user_led1 {
+ user_led1: led-1 {
label = "red:user1";
gpios = <&gpio4 25 0>;
linux,default-trigger = "heartbeat";
};
- user_led2 {
+ user_led2: led-2 {
label = "red:user2";
gpios = <&gpio4 26 0>;
linux,default-trigger = "mmc0";
};
- user_led3 {
+ user_led3: led-3 {
label = "red:user3";
gpios = <&gpio4 30 0>;
linux,default-trigger = "mmc1";
};
- user_led4 {
+ user_led4: led-4 {
label = "red:user4";
gpios = <&gpio1 0 0>;
panic-indicator;
linux,default-trigger = "none";
};
- wlan_active_led {
+ wlan_active_led: led-5 {
label = "red:wlan";
gpios = <&gpio1 1 0>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
- bt_active_led {
+ bt_active_led: led-6 {
label = "red:bt";
gpios = <&gpio1 4 0>;
linux,default-trigger = "hci0-power";
@@ -114,32 +115,32 @@
};
leds {
- user_led1: user_led1 {
+ user_led1_pin: user-led1-pin {
rockchip,pins =
<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
- user_led2: user_led2 {
+ user_led2_pin: user-led2-pin {
rockchip,pins =
<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
- user_led3: user_led3 {
+ user_led3_pin: user-led3-pin {
rockchip,pins =
<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
};
- user_led4: user_led4 {
+ user_led4_pin: user-led4-pin {
rockchip,pins =
<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
- wlan_led: wlan_led {
+ wlan_led_pin: wlan-led-pin {
rockchip,pins =
<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
- bt_led: bt_led {
+ bt_led_pin: bt-led-pin {
rockchip,pins =
<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -91,15 +91,15 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+ pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
- work-led {
+ work_led: led-0 {
label = "work";
default-state = "on";
gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
};
- diy-led {
+ diy_led: led-1 {
label = "diy";
default-state = "off";
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
@@ -629,11 +629,11 @@
};
leds {
- work_led_gpio: work_led-gpio {
+ work_led_pin: work-led-pin {
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
- diy_led_gpio: diy_led-gpio {
+ diy_led_pin: diy-led-pin {
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -39,9 +39,9 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&power_led_gpio>;
+ pinctrl-0 = <&power_led_pin>;
- led-0 {
+ power_led: led-0 {
label = "blue:power";
gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -510,7 +510,7 @@
};
leds {
- power_led_gpio: power-led-gpio {
+ power_led_pin: power-led-pin {
rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -90,9 +90,9 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&pwrled_gpio &slpled_gpio>;
+ pinctrl-0 = <&pwr_led_pin &slp_led_pin>;
- green-led {
+ green_led: led-0 {
color = <LED_COLOR_ID_GREEN>;
default-state = "on";
function = LED_FUNCTION_POWER;
@@ -100,7 +100,7 @@
label = "green:power";
};
- red-led {
+ red_led: led-1 {
color = <LED_COLOR_ID_RED>;
default-state = "off";
function = LED_FUNCTION_STANDBY;
@@ -825,11 +825,11 @@
};
leds {
- pwrled_gpio: pwrled_gpio {
+ pwr_led_pin: pwr-led-pin {
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
- slpled_gpio: slpled_gpio {
+ slp_led_pin: slp-led-pin {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -17,42 +17,43 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
- <&user_led4>, <&wlan_led>, <&bt_led>;
+ pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
+ <&user_led3_pin>, <&user_led4_pin>,
+ <&wlan_led_pin>, <&bt_led_pin>;
- user_led1 {
+ user_led1: led-1 {
label = "green:user1";
gpios = <&gpio4 RK_PC2 0>;
linux,default-trigger = "heartbeat";
};
- user_led2 {
+ user_led2: led-2 {
label = "green:user2";
gpios = <&gpio4 RK_PC6 0>;
linux,default-trigger = "mmc0";
};
- user_led3 {
+ user_led3: led-3 {
label = "green:user3";
gpios = <&gpio4 RK_PD0 0>;
linux,default-trigger = "mmc1";
};
- user_led4 {
+ user_led4: led-4 {
label = "green:user4";
gpios = <&gpio4 RK_PD4 0>;
panic-indicator;
linux,default-trigger = "none";
};
- wlan_active_led {
+ wlan_active_led: led-5 {
label = "yellow:wlan";
gpios = <&gpio4 RK_PD5 0>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
- bt_active_led {
+ bt_active_led: led-6 {
label = "blue:bt";
gpios = <&gpio4 RK_PD6 0>;
linux,default-trigger = "hci0-power";
@@ -68,32 +69,32 @@
&pinctrl {
leds {
- user_led1: user_led1 {
+ user_led1_pin: user-led1-pin {
rockchip,pins =
<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
- user_led2: user_led2 {
+ user_led2_pin: user-led2-pin {
rockchip,pins =
<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
- user_led3: user_led3 {
+ user_led3_pin: user-led3-pin {
rockchip,pins =
<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
- user_led4: user_led4 {
+ user_led4_pin: user-led4-pin {
rockchip,pins =
<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
- wlan_led: wlan_led {
+ wlan_led_pin: wlan-led-pin {
rockchip,pins =
<4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
- bt_led: bt_led {
+ bt_led_pin: bt-led-pin {
rockchip,pins =
<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
};
Current dts files with 'gpio-led' nodes were manually verified. In order to automate this process leds-gpio.txt has been converted to yaml. With this conversion a check for pattern properties was added. A test with the command below gives a screen full of warnings like: arch/arm64/boot/dts/rockchip/rk3368-r88.dt.yaml: gpio-leds: 'work' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Fix these errors with help of the following rules: 1: Add nodename in the preferred form. 2: Always add a label that ends with '_led' to prevent conflicts with other labels such as 'power' and 'mmc' 3: If leds need pinctrl add a label that ends with '_led_pin' also to prevent conflicts with other labels. patternProperties: # The first form is preferred, but fall back to just 'led' # anywhere in the node name to at least catch some child nodes. "(^led-[0-9a-f]$|led)": make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/ leds-gpio.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts | 4 +-- arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts | 6 ++--- arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 4 +-- arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 4 +-- arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts | 4 +-- .../boot/dts/rockchip/rk3368-orion-r68-meta.dts | 4 +-- arch/arm64/boot/dts/rockchip/rk3368-r88.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3399-ficus.dts | 29 +++++++++++----------- arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 10 ++++---- arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts | 6 ++--- .../boot/dts/rockchip/rk3399-pinebook-pro.dts | 10 ++++---- arch/arm64/boot/dts/rockchip/rk3399-rock960.dts | 29 +++++++++++----------- 12 files changed, 57 insertions(+), 55 deletions(-)