diff mbox series

[v1,3/3] spi: spi-rockchip: use num-cs property and ctlr->enable_gpiods

Message ID 20200511083022.23678-4-chris.ruehl@gtsys.com.hk (mailing list archive)
State Mainlined
Commit eb1262e3cc8b529218e085254888c90f096a5da5
Headers show
Series spi: spi-rockchip spi slave mode | expand

Commit Message

Chris Ruehl May 11, 2020, 8:30 a.m. UTC 
The original implementation set num_chipselect to ROCKCHIP_SPI_MAX_CS_NUM (2)
which seems wrong here. spi0 has 2 native cs, all others just one. With
enable and use of cs_gpiods / GPIO CS, its correct to set the num_chipselect
from the num-cs property and set max_native_cs with the define.
If num-cs is missing the default set to num_chipselect = 1.

Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
---
 drivers/spi/spi-rockchip.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index f57a8faa6f31..9b8a5e1233c0 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -708,8 +708,15 @@  static int rockchip_spi_probe(struct platform_device *pdev)
 		ctlr->slave_abort = rockchip_spi_slave_abort;
 	} else {
 		ctlr->flags = SPI_MASTER_GPIO_SS;
+		ctlr->max_native_cs = ROCKCHIP_SPI_MAX_CS_NUM;
+		/*
+		 * rk spi0 has two native cs, spi1..5 one cs only
+		 * if num-cs is missing in the dts, default to 1
+		 */
+		if (of_property_read_u16(np, "num-cs", &ctlr->num_chipselect))
+			ctlr->num_chipselect = 1;
+		ctlr->use_gpio_descriptors = true;
 	}
-	ctlr->num_chipselect = ROCKCHIP_SPI_MAX_CS_NUM;
 	ctlr->dev.of_node = pdev->dev.of_node;
 	ctlr->bits_per_word_mask = SPI_BPW_MASK(16) | SPI_BPW_MASK(8) | SPI_BPW_MASK(4);
 	ctlr->min_speed_hz = rs->freq / BAUDR_SCKDV_MAX;