[01/16] ARM: dts: at91: sama5d2: Fix the label numbering for flexcom functions

Commit Message

Tudor Ambarus May 14, 2020, 5:03 a.m. UTC

From: Tudor Ambarus <[e-mail]>

The sama5d2 SoC has the following IPs: [uart0, uart4], {spi0, spi1}, {i2c0, i2c1}.
Label the flexcom functions in order:
flx0: uart5, spi2, i2c2
flx1: uart6, spi3, i2c3
flx2: uart7, spi4, i2c4
flx3: uart8, spi5, i2c5
flx4: uart9, spi6, i2c6

Some boards respected this scheme, others not. Fix the ones that didn't.

Signed-off-by: Tudor Ambarus <[e-mail]>
---
 arch/arm/boot/dts/at91-kizbox3-hs.dts       |  4 ++--
 arch/arm/boot/dts/at91-kizbox3_common.dtsi  |  8 ++++----
 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 20 ++++++++++----------
 arch/arm/boot/dts/at91-sama5d2_icp.dts      |  8 ++++----
 arch/arm/boot/dts/at91-sama5d2_xplained.dts |  2 +-
 5 files changed, 21 insertions(+), 21 deletions(-)

Patch

diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
index 8734e7f8939e..0da1f0557eaf 100644
--- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
+++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
@@ -283,7 +283,7 @@ 
 
 &flx3 {
 	status = "okay";
-	uart6: serial@200 {
+	uart8: serial@200 {
 		status = "okay";
 	};
 };
@@ -291,7 +291,7 @@ 
 &flx4 {
 	status = "okay";
 
-	i2c2: i2c@600 {
+	i2c6: i2c@600 {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
index 299e74d23184..d7a6c972bdac 100644
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -28,7 +28,7 @@ 
 		serial3 = &uart3;
 		serial4 = &uart4;
 		serial5 = &uart5;
-		serial6 = &uart6;
+		serial6 = &uart8;
 	};
 
 	chosen {
@@ -207,7 +207,7 @@ 
 		};
 	};
 
-	pinctrl_flx4_default: flx4_i2c2_default {
+	pinctrl_flx4_default: flx4_i2c6_default {
 		pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
 		<PIN_PD13__FLEXCOM4_IO1>; //CLK
 		bias-disable;
@@ -324,7 +324,7 @@ 
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
 	status = "disabled";
 
-	uart6: serial@200 {
+	uart8: serial@200 {
 		compatible = "atmel,at91sam9260-usart";
 		reg = <0x200 0x400>;
 		interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -350,7 +350,7 @@ 
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
 	status = "disabled";
 
-	i2c2: i2c@600 {
+	i2c6: i2c@600 {
 		compatible = "atmel,sama5d2-i2c";
 		reg = <0x600 0x200>;
 		interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index b0853bf7901c..d215243fe163 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -21,7 +21,7 @@ 
 		serial1 = &uart4;	/* mikro BUS 1 */
 		serial2 = &uart2;	/* mikro BUS 2 */
 		i2c1	= &i2c1;
-		i2c2	= &i2c2;
+		i2c2	= &i2c3;
 	};
 
 	chosen {
@@ -125,7 +125,7 @@ 
 				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
 				status = "okay";
 
-				i2c2: i2c@600 {
+				i2c3: i2c@600 {
 					compatible = "atmel,sama5d2-i2c";
 					reg = <0x600 0x200>;
 					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -178,7 +178,7 @@ 
 				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
 				status = "disabled";
 
-				uart7: serial@200 {
+				uart8: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
 					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -190,7 +190,7 @@ 
 					status = "disabled"; /* Conflict with isc. */
 				};
 
-				spi2: spi@400 {
+				spi5: spi@400 {
 					compatible = "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -207,7 +207,7 @@ 
 				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
 				status = "okay";
 
-				uart6: serial@200 {
+				uart9: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
 					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -216,10 +216,10 @@ 
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_flx4_default>;
 					atmel,fifo-size = <32>;
-					status = "disabled"; /* Conflict with spi3 and i2c3. */
+					status = "disabled"; /* Conflict with spi6 and i2c6. */
 				};
 
-				spi3: spi@400 {
+				spi6: spi@400 {
 					compatible = "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -228,10 +228,10 @@ 
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
 					atmel,fifo-size = <16>;
-					status = "okay"; /* Conflict with uart6 and i2c3. */
+					status = "okay"; /* Conflict with uart5 and i2c6. */
 				};
 
-				i2c3: i2c@600 {
+				i2c6: i2c@600 {
 					compatible = "atmel,sama5d2-i2c";
 					reg = <0x600 0x200>;
 					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -243,7 +243,7 @@ 
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_flx4_default>;
 					atmel,fifo-size = <16>;
-					status = "disabled"; /* Conflict with uart6 and spi3. */
+					status = "disabled"; /* Conflict with uart5 and spi6. */
 				};
 			};
 
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index cc9fa700eafb..1d9556dbbd63 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -22,7 +22,7 @@ 
 		serial0 = &uart0;	/* debug uart0 + mikro BUS 1 */
 		serial1 = &uart1;	/* mikro BUS 3 */
 		serial3 = &uart3;	/* mikro BUS 2 */
-		serial5 = &uart5;	/* flx2 */
+		serial5 = &uart7;	/* flx2 */
 		i2c0	= &i2c0;
 		i2c1	= &i2c1;
 	};
@@ -159,7 +159,7 @@ 
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
 	status = "okay";
 
-	uart5: serial@200 {
+	uart7: serial@200 {
 		compatible = "atmel,at91sam9260-usart";
 		reg = <0x200 0x200>;
 		interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -184,7 +184,7 @@ 
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
 	status = "okay";
 
-	spi3: spi@400 {
+	spi5: spi@400 {
 		compatible = "atmel,at91rm9200-spi";
 		reg = <0x400 0x200>;
 		interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -201,7 +201,7 @@ 
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
 	status = "okay";
 
-	i2c2: i2c@600 {
+	i2c6: i2c@600 {
 		compatible = "atmel,sama5d2-i2c";
 		reg = <0x600 0x200>;
 		interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index e0c6cff1a312..0666708b05f9 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -377,7 +377,7 @@ 
 				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
 				status = "okay";
 
-				i2c2: i2c@600 {
+				i2c6: i2c@600 {
 					compatible = "atmel,sama5d2-i2c";
 					reg = <0x600 0x200>;
 					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;