@@ -522,9 +522,9 @@
resets = <&cru SRST_TSADC>;
reset-names = "tsadc-apb";
pinctrl-names = "init", "default", "sleep";
- pinctrl-0 = <&otp_gpio>;
+ pinctrl-0 = <&otp_pin>;
pinctrl-1 = <&otp_out>;
- pinctrl-2 = <&otp_gpio>;
+ pinctrl-2 = <&otp_pin>;
#thermal-sensor-cells = <0>;
rockchip,hw-tshut-temp = <95000>;
status = "disabled";
@@ -1103,7 +1103,7 @@
};
tsadc {
- otp_gpio: otp-gpio {
+ otp_pin: otp-pin {
rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -47,7 +47,7 @@
&sdmmc {
disable-wp;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
&sdmmc_bus4>;
};
@@ -192,7 +192,7 @@
&sdmmc {
disable-wp;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
&sdmmc_bus4>;
};
@@ -18,8 +18,8 @@
};
&sdmmc {
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
- &sdmmc_wp_gpio &sdmmc_bus4>;
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
+ &sdmmc_wp_pin &sdmmc_bus4>;
wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
/delete-property/ disable-wp;
@@ -27,7 +27,7 @@
&pinctrl {
sdmmc {
- sdmmc_wp_gpio: sdmmc-wp-gpio {
+ sdmmc_wp_pin: sdmmc-wp-pin {
rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
@@ -114,7 +114,7 @@
&sdmmc {
disable-wp;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
&sdmmc_bus4>;
};
@@ -105,7 +105,7 @@
};
sdmmc {
- sdmmc_wp_gpio: sdmmc-wp-gpio {
+ sdmmc_wp_pin: sdmmc-wp-pin {
rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
@@ -126,8 +126,8 @@
&sdmmc {
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
- &sdmmc_wp_gpio &sdmmc_bus4>;
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
+ &sdmmc_wp_pin &sdmmc_bus4>;
wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>;
};
@@ -41,7 +41,7 @@
};
/* This is where we actually hook up CD */
- sdmmc_cd_gpio: sdmmc-cd-gpio {
+ sdmmc_cd_pin: sdmmc-cd-pin {
rockchip,pins = <7 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -54,7 +54,7 @@
&sdmmc {
disable-wp;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
&sdmmc_bus4>;
};
@@ -575,9 +575,9 @@
resets = <&cru SRST_TSADC>;
reset-names = "tsadc-apb";
pinctrl-names = "init", "default", "sleep";
- pinctrl-0 = <&otp_gpio>;
+ pinctrl-0 = <&otp_pin>;
pinctrl-1 = <&otp_out>;
- pinctrl-2 = <&otp_gpio>;
+ pinctrl-2 = <&otp_pin>;
#thermal-sensor-cells = <1>;
rockchip,grf = <&grf>;
rockchip,hw-tshut-temp = <95000>;
@@ -1930,7 +1930,7 @@
};
tsadc {
- otp_gpio: otp-gpio {
+ otp_pin: otp-pin {
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -352,9 +352,9 @@
clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
clock-names = "tsadc", "apb_pclk";
pinctrl-names = "init", "default", "sleep";
- pinctrl-0 = <&otp_gpio>;
+ pinctrl-0 = <&otp_pin>;
pinctrl-1 = <&otp_out>;
- pinctrl-2 = <&otp_gpio>;
+ pinctrl-2 = <&otp_pin>;
resets = <&cru SRST_TSADC>;
reset-names = "tsadc-apb";
rockchip,hw-tshut-temp = <120000>;
@@ -729,7 +729,7 @@
<0 RK_PC6 3 &pcfg_pull_none>;
};
- i2c2m1_gpio: i2c2m1-gpio {
+ i2c2m1_pins: i2c2m1-pins {
rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -741,7 +741,7 @@
<1 RK_PD4 2 &pcfg_pull_none>;
};
- i2c2m05v_gpio: i2c2m05v-gpio {
+ i2c2m05v_pins: i2c2m05v-pins {
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -868,7 +868,7 @@
rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>;
};
- otp_gpio: otp-gpio {
+ otp_pin: otp-pin {
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -887,7 +887,7 @@
rockchip,pins = <3 RK_PA3 1 &pcfg_pull_none>;
};
- uart0_rts_gpio: uart0-rts-gpio {
+ uart0_rts_pin: uart0-rts-pin {
rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
A test with the command below gives for example this error: arch/arm/boot/dts/rk3288-tinker.dt.yaml: tsadc: otp-gpio: {'phandle': [[54]], 'rockchip,pins': [[0, 10, 0, 118]]} is not of type 'array' 'gpio' is a sort of reserved nodename and should not be used for pinctrl in combination with 'rockchip,pins', so change nodes that end with 'gpio' to end with 'pin' or 'pins'. make ARCH=arm dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/ dtschema/schemas/gpio/gpio.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- arch/arm/boot/dts/rk322x.dtsi | 6 +++--- arch/arm/boot/dts/rk3288-veyron-jaq.dts | 2 +- arch/arm/boot/dts/rk3288-veyron-jerry.dts | 2 +- arch/arm/boot/dts/rk3288-veyron-mighty.dts | 6 +++--- arch/arm/boot/dts/rk3288-veyron-minnie.dts | 2 +- arch/arm/boot/dts/rk3288-veyron-pinky.dts | 6 +++--- arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi | 2 +- arch/arm/boot/dts/rk3288-veyron-speedy.dts | 2 +- arch/arm/boot/dts/rk3288.dtsi | 6 +++--- arch/arm/boot/dts/rv1108.dtsi | 12 ++++++------ 10 files changed, 23 insertions(+), 23 deletions(-)