new file mode 100644
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/kontron,sl28cpld-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO driver for the sl28cpld board management controller
+
+maintainers:
+ - Michael Walle <michael@walle.cc>
+
+description: |
+ This module is part of the sl28cpld multi-function device. For more
+ details see Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
+
+ There are three flavors of the GPIO controller, one full featured
+ input/output with interrupt support (kontron,sl28cpld-gpio), one
+ output-only (kontron,sl28-gpo) and one input-only (kontron,sl28-gpi).
+
+ Each controller supports 8 GPIO lines.
+
+properties:
+ compatible:
+ enum:
+ - kontron,sl28cpld-gpio
+ - kontron,sl28cpld-gpi
+ - kontron,sl28cpld-gpo
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#interrupt-cells":
+ const: 2
+
+ interrupt-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-controller: true
+
+ gpio-line-names:
+ minItems: 1
+ maxItems: 8
+
+required:
+ - compatible
+ - "#gpio-cells"
+ - gpio-controller
+
+additionalProperties: false
new file mode 100644
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/kontron,sl28cpld-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware monitoring driver for the sl28cpld board management controller
+
+maintainers:
+ - Michael Walle <michael@walle.cc>
+
+description: |
+ This module is part of the sl28cpld multi-function device. For more
+ details see Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
+
+properties:
+ compatible:
+ enum:
+ - kontron,sl28cpld-fan
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+
+additionalProperties: false
new file mode 100644
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/kontron,sl28cpld-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Interrupt controller driver for the sl28cpld board management controller
+
+maintainers:
+ - Michael Walle <michael@walle.cc>
+
+description: |
+ This module is part of the sl28cpld multi-function device. For more
+ details see Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
+
+ The following interrupts are available. All types and levels are fixed
+ and handled by the board management controller.
+
+ ==== ============= ==================================
+ IRQ line/device description
+ ==== ============= ==================================
+ 0 RTC_INT# Interrupt line from on-board RTC
+ 1 SMB_ALERT# Event on SMB_ALERT# line (P1)
+ 2 ESPI_ALERT0# Event on ESPI_ALERT0# line (S43)
+ 3 ESPI_ALERT1# Event on ESPI_ALERT1# line (S44)
+ 4 PWR_BTN# Event on PWR_BTN# line (P128)
+ 5 SLEEP# Event on SLEEP# line (S149)
+ 6 watchdog Interrupt of the internal watchdog
+ 7 n/a not used
+ ==== ============= ==================================
+
+properties:
+ compatible:
+ enum:
+ - kontron,sl28cpld-intc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#interrupt-cells":
+ const: 2
+
+ interrupt-controller: true
+
+required:
+ - compatible
+ - interrupts
+ - "#interrupt-cells"
+ - interrupt-controller
+
+additionalProperties: false
new file mode 100644
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kontron's sl28cpld board management controller
+
+maintainers:
+ - Michael Walle <michael@walle.cc>
+
+description: |
+ The board management controller may contain different IP blocks like
+ watchdog, fan monitoring, PWM controller, interrupt controller and a
+ GPIO controller.
+
+properties:
+ compatible:
+ const: kontron,sl28cpld-r1
+
+ reg:
+ description:
+ I2C device address.
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ "#interrupt-cells":
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+patternProperties:
+ "^gpio(@[0-9]+)?$":
+ $ref: ../gpio/kontron,sl28cpld-gpio.yaml
+
+ "^hwmon(@[0-9]+)?$":
+ $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml
+
+ "^interrupt-controller(@[0-9]+)?$":
+ $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml
+
+ "^pwm(@[0-9]+)?$":
+ $ref: ../pwm/kontron,sl28cpld-pwm.yaml
+
+ "^watchdog(@[0-9]+)?$":
+ $ref: ../watchdog/kontron,sl28cpld-wdt.yaml
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sl28cpld@4a {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "kontron,sl28cpld-r1";
+ reg = <0x4a>;
+
+ watchdog@4 {
+ compatible = "kontron,sl28cpld-wdt";
+ reg = <0x4>;
+ kontron,assert-wdt-timeout-pin;
+ };
+
+ hwmon@b {
+ compatible = "kontron,sl28cpld-fan";
+ reg = <0xb>;
+ };
+
+ pwm@c {
+ #pwm-cells = <2>;
+ compatible = "kontron,sl28cpld-pwm";
+ reg = <0xc>;
+ };
+
+ pwm@e {
+ #pwm-cells = <2>;
+ compatible = "kontron,sl28cpld-pwm";
+ reg = <0xe>;
+ };
+
+ gpio@10 {
+ compatible = "kontron,sl28cpld-gpio";
+ reg = <0x10>;
+ interrupts-extended = <&gpio2 6
+ IRQ_TYPE_EDGE_FALLING>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "a", "b", "c";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio@15 {
+ compatible = "kontron,sl28cpld-gpio";
+ reg = <0x15>;
+ interrupts-extended = <&gpio2 6
+ IRQ_TYPE_EDGE_FALLING>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio@1a {
+ compatible = "kontron,sl28cpld-gpo";
+ reg = <0x1a>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@1b {
+ compatible = "kontron,sl28cpld-gpi";
+ reg = <0x1b>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ interrupt-controller@1c {
+ compatible = "kontron,sl28cpld-intc";
+ reg = <0x1c>;
+ interrupts-extended = <&gpio2 6
+ IRQ_TYPE_EDGE_FALLING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+ };
new file mode 100644
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/kontron,sl28cpld-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PWM driver for the sl28cpld board management controller
+
+maintainers:
+ - Michael Walle <michael@walle.cc>
+
+description: |
+ This module is part of the sl28cpld multi-function device. For more
+ details see Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
+
+ The controller supports one PWM channel and supports only four distinct
+ frequencies (250Hz, 500Hz, 1kHz, 2kHz).
+
+allOf:
+ - $ref: pwm.yaml#
+
+properties:
+ compatible:
+ const: kontron,sl28cpld-pwm
+
+ reg:
+ maxItems: 1
+
+ "#pwm-cells":
+ const: 2
+
+required:
+ - compatible
+
+additionalProperties: false
new file mode 100644
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/kontron,sl28cpld-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Watchdog driver for the sl28cpld board management controller
+
+maintainers:
+ - Michael Walle <michael@walle.cc>
+
+description: |
+ This module is part of the sl28cpld multi-function device. For more
+ details see Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ const: kontron,sl28cpld-wdt
+
+ reg:
+ maxItems: 1
+
+ kontron,assert-wdt-timeout-pin:
+ description: The SMARC standard defines a WDT_TIME_OUT# pin. If this
+ property is set, this output will be pulsed when the watchdog bites
+ and the system resets.
+ type: boolean
+
+required:
+ - compatible
+
+additionalProperties: false
Add a device tree bindings for the board management controller found on the Kontron SMARC-sAL28 board. Signed-off-by: Michael Walle <michael@walle.cc> --- .../bindings/gpio/kontron,sl28cpld-gpio.yaml | 54 +++++++ .../hwmon/kontron,sl28cpld-hwmon.yaml | 27 ++++ .../kontron,sl28cpld-intc.yaml | 54 +++++++ .../bindings/mfd/kontron,sl28cpld.yaml | 153 ++++++++++++++++++ .../bindings/pwm/kontron,sl28cpld-pwm.yaml | 35 ++++ .../watchdog/kontron,sl28cpld-wdt.yaml | 35 ++++ 6 files changed, 358 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml create mode 100644 Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml create mode 100644 Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml create mode 100644 Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml create mode 100644 Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml