@@ -67,7 +67,7 @@ static struct board_info __initdata board_cvg834g = {
.ephy_reset_gpio = 36,
.ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
};
-#endif
+#endif /* CONFIG_BCM63XX_CPU_3368 */
/*
* known 6328 boards
@@ -115,7 +115,7 @@ static struct board_info __initdata board_96328avng = {
},
},
};
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6328 */
/*
* known 6338 boards
@@ -204,7 +204,7 @@ static struct board_info __initdata board_96338w = {
},
},
};
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6338 */
/*
* known 6345 boards
@@ -216,7 +216,7 @@ static struct board_info __initdata board_96345gw2 = {
.has_uart0 = 1,
};
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6345 */
/*
* known 6348 boards
@@ -464,7 +464,6 @@ static struct board_info __initdata board_rta1025w_16 = {
},
};
-
static struct board_info __initdata board_DV201AMR = {
.name = "DV201AMR",
.expected_cpu_id = 0x6348,
@@ -505,7 +504,7 @@ static struct board_info __initdata board_96348gw_a = {
.has_ohci0 = 1,
};
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6348 */
/*
* known 6358 boards
@@ -530,7 +529,6 @@ static struct board_info __initdata board_96358vw = {
.force_duplex_full = 1,
},
-
.has_ohci0 = 1,
.has_pccard = 1,
.has_ehci0 = 1,
@@ -654,7 +652,7 @@ static struct board_info __initdata board_DWVS0 = {
.has_ohci0 = 1,
};
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6358 */
/*
* all boards
@@ -662,17 +660,17 @@ static struct board_info __initdata board_DWVS0 = {
static const struct board_info __initconst *bcm963xx_boards[] = {
#ifdef CONFIG_BCM63XX_CPU_3368
&board_cvg834g,
-#endif
+#endif /* CONFIG_BCM63XX_CPU_3368 */
#ifdef CONFIG_BCM63XX_CPU_6328
&board_96328avng,
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6328 */
#ifdef CONFIG_BCM63XX_CPU_6338
&board_96338gw,
&board_96338w,
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6338 */
#ifdef CONFIG_BCM63XX_CPU_6345
&board_96345gw2,
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6345 */
#ifdef CONFIG_BCM63XX_CPU_6348
&board_96348r,
&board_96348gw,
@@ -682,14 +680,13 @@ static const struct board_info __initconst *bcm963xx_boards[] = {
&board_DV201AMR,
&board_96348gw_a,
&board_rta1025w_16,
-#endif
-
+#endif /* CONFIG_BCM63XX_CPU_6348 */
#ifdef CONFIG_BCM63XX_CPU_6358
&board_96358vw,
&board_96358vw2,
&board_AGPFS0,
&board_DWVS0,
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6358 */
};
/*
@@ -728,7 +725,7 @@ int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
return -EINVAL;
}
}
-#endif
+#endif /* CONFIG_SSB_PCIHOST */
/*
* return board name for /proc/cpuinfo
@@ -807,7 +804,7 @@ void __init board_prom_init(void)
if (BCMCPU_IS_6348())
val |= GPIO_MODE_6348_G2_PCI;
}
-#endif
+#endif /* CONFIG_PCI */
if (board.has_pccard) {
if (BCMCPU_IS_6348())
@@ -892,7 +889,7 @@ int __init board_register_devices(void)
&bcm63xx_get_fallback_sprom) < 0)
pr_err("failed to register fallback SPROM\n");
}
-#endif
+#endif /* CONFIG_SSB_PCIHOST */
bcm63xx_spi_register();
There are plenty of ifdefs in board_bcm963xx.c without endif comments. Let's make the code easier to follow by adding proper comments. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> --- arch/mips/bcm63xx/boards/board_bcm963xx.c | 33 +++++++++++------------ 1 file changed, 15 insertions(+), 18 deletions(-)