@@ -117,6 +117,12 @@ leds0: led-controller@10001900 {
status = "disabled";
};
+ periph_pwr: power-controller@1000184c {
+ compatible = "brcm,bcm6328-power-controller";
+ reg = <0x1000184c 0x4>;
+ #power-domain-cells = <1>;
+ };
+
ehci: usb@10002500 {
compatible = "brcm,bcm63268-ehci", "generic-ehci";
reg = <0x10002500 0x100>;
new file mode 100644
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_BMIPS_BCM63268_PM_H
+#define __DT_BINDINGS_BMIPS_BCM63268_PM_H
+
+#define BCM63268_POWER_DOMAIN_SAR 0
+#define BCM63268_POWER_DOMAIN_IPSEC 1
+#define BCM63268_POWER_DOMAIN_MIPS 2
+#define BCM63268_POWER_DOMAIN_DECT 3
+#define BCM63268_POWER_DOMAIN_USBH 4
+#define BCM63268_POWER_DOMAIN_USBD 5
+#define BCM63268_POWER_DOMAIN_ROBOSW 6
+#define BCM63268_POWER_DOMAIN_PCM 7
+#define BCM63268_POWER_DOMAIN_PERIPH 8
+#define BCM63268_POWER_DOMAIN_VDSL_PHY 9
+#define BCM63268_POWER_DOMAIN_VDSL_MIPS 10
+#define BCM63268_POWER_DOMAIN_FAP 11
+#define BCM63268_POWER_DOMAIN_PCIE 12
+#define BCM63268_POWER_DOMAIN_WLAN_PADS 13
+
+#endif /* __DT_BINDINGS_BMIPS_BCM63268_PM_H */
BCM63268 SoCs have a power domain controller to enable/disable certain components in order to save power. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> --- v2: Add support for BCM63268 too. arch/mips/boot/dts/brcm/bcm63268.dtsi | 6 ++++++ include/dt-bindings/soc/bcm63268-pm.h | 21 +++++++++++++++++++++ 2 files changed, 27 insertions(+) create mode 100644 include/dt-bindings/soc/bcm63268-pm.h