[70/73] arm64: tegra: Various fixes for PMICs

Commit Message

Thierry Reding June 16, 2020, 1:52 p.m. UTC

From: Thierry Reding <[e-mail]>

Standardize on "pmic" as the node name for the PMIC on Tegra210 systems
and use consistent names for pinmux and GPIO hog nodes.

Signed-off-by: Thierry Reding <[e-mail]>
---
 .../arm64/boot/dts/nvidia/tegra210-p2894.dtsi | 31 +++++++++----------
 arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 14 ++++-----
 2 files changed, 22 insertions(+), 23 deletions(-)

Patch

diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
index 1acb9bb6c7df..41beab626d95 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
@@ -1328,7 +1328,7 @@  i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
-		max77620: max77620@3c {
+		pmic: pmic@3c {
 			compatible = "maxim,max77620";
 			reg = <0x3c>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -1343,12 +1343,12 @@  max77620: max77620@3c {
 			pinctrl-0 = <&max77620_default>;
 
 			max77620_default: pinmux@0 {
-				pin_gpio0 {
+				gpio0 {
 					pins = "gpio0";
 					function = "gpio";
 				};
 
-				pin_gpio1 {
+				gpio1 {
 					pins = "gpio1";
 					function = "fps-out";
 					drive-push-pull = <1>;
@@ -1357,34 +1357,33 @@  pin_gpio1 {
 					maxim,active-fps-power-down-slot = <0>;
 				};
 
-				pin_gpio2_3 {
-					pins = "gpio2", "gpio3";
+				gpio2 {
+					pins = "gpio2";
 					function = "fps-out";
 					drive-open-drain = <1>;
 					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
 				};
 
-				pin_gpio4 {
+				gpio3 {
+					pins = "gpio3";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				gpio4 {
 					pins = "gpio4";
 					function = "32k-out1";
 				};
 
-				pin_gpio5_6_7 {
+				gpio5_6_7 {
 					pins = "gpio5", "gpio6", "gpio7";
 					function = "gpio";
 					drive-push-pull = <1>;
 				};
-
-				pin_gpio2 {
-					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
-				};
-
-				pin_gpio3 {
-					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
-				};
 			};
 
-			spmic-default-output-high {
+			gpio@0 {
 				gpio-hog;
 				output-high;
 				gpios = <2 GPIO_ACTIVE_HIGH>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index f7840e5e069a..a946c5c31102 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -1354,11 +1354,11 @@  max77621_cpu: max77621@1b {
 			maxim,enable-active-discharge;
 			maxim,enable-bias-control;
 			maxim,enable-etr;
-			maxim,enable-gpio = <&max77620 5 0>;
+			maxim,enable-gpio = <&pmic 5 0>;
 			maxim,externally-enable;
 		};
 
-		max77620: max77620@3c {
+		pmic: pmic@3c {
 			compatible = "maxim,max77620";
 			reg = <0x3c>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -1372,8 +1372,8 @@  max77620: max77620@3c {
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77620_default>;
 
-			max77620_default: pinmux@0 {
-				pin_gpio {
+			max77620_default: pinmux {
+				gpio0_1_2_7 {
 					pins = "gpio0", "gpio1", "gpio2", "gpio7";
 					function = "gpio";
 				};
@@ -1383,7 +1383,7 @@  pin_gpio {
 				 * sequence, So it must be sequenced up (automatically
 				 * set by OTP) and down properly.
 				 */
-				pin_gpio3 {
+				gpio3 {
 					pins = "gpio3";
 					function = "fps-out";
 					drive-open-drain = <1>;
@@ -1392,13 +1392,13 @@  pin_gpio3 {
 					maxim,active-fps-power-down-slot = <2>;
 				};
 
-				pin_gpio5_6 {
+				gpio5_6 {
 					pins = "gpio5", "gpio6";
 					function = "gpio";
 					drive-push-pull = <1>;
 				};
 
-				pin_32k {
+				gpio4 {
 					pins = "gpio4";
 					function = "32k-out1";
 				};