| Message ID | 20200629203949.6601-2-dinguyen@kernel.org (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 263a0269a59c0b4145829462a107fe7f7327105f |
| Headers | show |
| Series | [1/3] arm64: dts: agilex: add status to qspi dts node | expand |
Hi
[This is an automated email]
This commit has been processed because it contains a "Fixes:" tag
fixing commit: 0cb140d07fc7 ("arm64: dts: stratix10: Add QSPI support for Stratix10").
The bot has tested the following trees: v5.7.7, v5.4.50, v4.19.131.
v5.7.7: Build OK!
v5.4.50: Failed to apply! Possible dependencies:
3c0f3b8545e79 ("arm64: dts: add NAND board files for Stratix10 and Agilex")
v4.19.131: Failed to apply! Possible dependencies:
116edf6e5239e ("MIPS: mscc: add DT for Ocelot PCB120")
1ac832509f2ea ("nds32: Support FP emulation")
387181dcdb6c1 ("RISC-V: Always compile mm/init.c with cmodel=medany and notrace")
3c0f3b8545e79 ("arm64: dts: add NAND board files for Stratix10 and Agilex")
4b36daf9ada30 ("arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA")
704cfd7f5f71c ("ARM: sti: remove pen_release and boot_lock")
78e3dbc166a13 ("ARM: Prepare RDA8810PL SoC")
7938e6315c9af ("nds32: Power management for nds32")
9671f7061433e ("Allow to disable FPU support")
9fb29c734f9e9 ("ARM: milbeaut: Add basic support for Milbeaut m10v SoC")
c32e64e852f3f ("csky: Build infrastructure")
c4c14c3bd177e ("csky: remove builtin-dtb Kbuild")
e46bf83c1864a ("nds32: nds32 FPU port")
ebd09753b5707 ("nds32: Perf porting")
ec8f24b7faaf3 ("treewide: Add SPDX license identifier - Makefile/Kconfig")
NOTE: The patch will not be queued to stable trees until it is upstream.
How should we proceed with this patch?
Please apply to v5.7.7 Thanks, Dinh On 7/10/20 9:02 AM, Sasha Levin wrote: > Hi > > [This is an automated email] > > This commit has been processed because it contains a "Fixes:" tag > fixing commit: 0cb140d07fc7 ("arm64: dts: stratix10: Add QSPI support for Stratix10"). > > The bot has tested the following trees: v5.7.7, v5.4.50, v4.19.131. > > v5.7.7: Build OK! > v5.4.50: Failed to apply! Possible dependencies: > 3c0f3b8545e79 ("arm64: dts: add NAND board files for Stratix10 and Agilex") > > v4.19.131: Failed to apply! Possible dependencies: > 116edf6e5239e ("MIPS: mscc: add DT for Ocelot PCB120") > 1ac832509f2ea ("nds32: Support FP emulation") > 387181dcdb6c1 ("RISC-V: Always compile mm/init.c with cmodel=medany and notrace") > 3c0f3b8545e79 ("arm64: dts: add NAND board files for Stratix10 and Agilex") > 4b36daf9ada30 ("arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA") > 704cfd7f5f71c ("ARM: sti: remove pen_release and boot_lock") > 78e3dbc166a13 ("ARM: Prepare RDA8810PL SoC") > 7938e6315c9af ("nds32: Power management for nds32") > 9671f7061433e ("Allow to disable FPU support") > 9fb29c734f9e9 ("ARM: milbeaut: Add basic support for Milbeaut m10v SoC") > c32e64e852f3f ("csky: Build infrastructure") > c4c14c3bd177e ("csky: remove builtin-dtb Kbuild") > e46bf83c1864a ("nds32: nds32 FPU port") > ebd09753b5707 ("nds32: Perf porting") > ec8f24b7faaf3 ("treewide: Add SPDX license identifier - Makefile/Kconfig") > > > NOTE: The patch will not be queued to stable trees until it is upstream. > > How should we proceed with this patch? >
Please apply to v5.7.7 Thanks, Dinh On 7/10/20 9:02 AM, Sasha Levin wrote: > Hi > > [This is an automated email] > > This commit has been processed because it contains a "Fixes:" tag > fixing commit: 0cb140d07fc7 ("arm64: dts: stratix10: Add QSPI support for Stratix10"). > > The bot has tested the following trees: v5.7.7, v5.4.50, v4.19.131. > > v5.7.7: Build OK! > v5.4.50: Failed to apply! Possible dependencies: > 3c0f3b8545e79 ("arm64: dts: add NAND board files for Stratix10 and Agilex") > > v4.19.131: Failed to apply! Possible dependencies: > 116edf6e5239e ("MIPS: mscc: add DT for Ocelot PCB120") > 1ac832509f2ea ("nds32: Support FP emulation") > 387181dcdb6c1 ("RISC-V: Always compile mm/init.c with cmodel=medany and notrace") > 3c0f3b8545e79 ("arm64: dts: add NAND board files for Stratix10 and Agilex") > 4b36daf9ada30 ("arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA") > 704cfd7f5f71c ("ARM: sti: remove pen_release and boot_lock") > 78e3dbc166a13 ("ARM: Prepare RDA8810PL SoC") > 7938e6315c9af ("nds32: Power management for nds32") > 9671f7061433e ("Allow to disable FPU support") > 9fb29c734f9e9 ("ARM: milbeaut: Add basic support for Milbeaut m10v SoC") > c32e64e852f3f ("csky: Build infrastructure") > c4c14c3bd177e ("csky: remove builtin-dtb Kbuild") > e46bf83c1864a ("nds32: nds32 FPU port") > ebd09753b5707 ("nds32: Perf porting") > ec8f24b7faaf3 ("treewide: Add SPDX license identifier - Makefile/Kconfig") > > > NOTE: The patch will not be queued to stable trees until it is upstream. > > How should we proceed with this patch? >
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index f6c4a15079d3..feadd21bc0dc 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -155,6 +155,7 @@ }; &qspi { + status = "okay"; flash@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts index 9946515b8afd..4000c393243d 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts @@ -188,6 +188,7 @@ }; &qspi { + status = "okay"; flash@0 { #address-cells = <1>; #size-cells = <1>;
Add status = "okay" to QSPI node. Fixes: 0cb140d07fc75 ("arm64: dts: stratix10: Add QSPI support for Stratix10") Cc: linux-stable <stable@vger.kernel.org> # >= v5.6 Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> --- arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts | 1 + arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts | 1 + 2 files changed, 2 insertions(+)