| Message ID | 20200702143337.8590-2-frieder.schrempf@kontron.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for Kontron i.MX8MM SoMs and boards | expand |
Hi Frieder Nice to see some more i.MX 8M Mini action. Much appreciated! On Thu, 2020-07-02 at 16:33 +0200, Schrempf Frieder wrote: > From: Frieder Schrempf <frieder.schrempf@kontron.de> > > Kontron Electronics GmbH offers small and powerful SoMs based on the > i.MX8MM To avoid much confusion in NXP's nomenclature I would recommend writing this always as i.MX 8M Mini. Of course, in code, using imx8mm is fine. > including PMIC, LPDDR4-RAM, eMMC and SPI NOR. > > The matching baseboards have the same form factor and similar interfaces > as the other boards from the Kontron "Board-Line" family, including > SD card, 1G Ethernet, 100M Ethernet, USB Host/OTG, digital IOs, RS232, > RS485, CAN, LVDS or HDMI, RTC and much more. > > Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> > --- > .../dts/freescale/imx8mm-kontron-n8010-s.dts | 15 + > .../freescale/imx8mm-kontron-n8010-som.dtsi | 16 + > .../dts/freescale/imx8mm-kontron-n8011-s.dts | 15 + > .../freescale/imx8mm-kontron-n8011-som.dtsi | 16 + > .../dts/freescale/imx8mm-kontron-n801x-s.dtsi | 326 ++++++++++++++++++ > .../freescale/imx8mm-kontron-n801x-som.dtsi | 281 +++++++++++++++ > 6 files changed, 669 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-s.dts > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-som.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-s.dts > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-som.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-s.dts b/arch/arm64/boot/dts/freescale/imx8mm- > kontron-n8010-s.dts > new file mode 100644 > index 000000000000..0911f2d0555b > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-s.dts > @@ -0,0 +1,15 @@ > +// SPDX-License-Identifier: GPL-2.0 Don't you want to use the more common GPL-2.0+ OR MIT variant which allows for more freedom? At least NXP's imx8mm.dtsi also uses that. > +/* > + * Copyright (C) 2019 Kontron Electronics GmbH I know that there is much about 2020 to rather be ignored. > + */ > + > +/dts-v1/; > + > +#include "imx8mm-kontron-n8010-som.dtsi" > +#include "imx8mm-kontron-n801x-s.dtsi" > + > +/ { > + model = "Kontron i.MX8MM N8010 S"; > + compatible = "kontron,imx8mm-n8010-s", "kontron,imx8mm-n8010-som", > + "fsl,imx8mm"; I believe now with Linux having dropped the strict 80-column line length coding style limit we are allowed to go up to 100 (;-p). > +}; > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-som.dtsi > b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-som.dtsi > new file mode 100644 > index 000000000000..5b178ce4ce1b > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-som.dtsi > @@ -0,0 +1,16 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2019 Kontron Electronics GmbH > + */ > + > +#include "imx8mm-kontron-n801x-som.dtsi" > + > +/ { > + model = "Kontron i.MX8MM N8010 SoM"; > + compatible = "kontron,imx8mm-n8010-som", "fsl,imx8mm"; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0x0 0x40000000 0 0x80000000>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-s.dts b/arch/arm64/boot/dts/freescale/imx8mm- > kontron-n8011-s.dts > new file mode 100644 > index 000000000000..5c44bd77ed32 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-s.dts > @@ -0,0 +1,15 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2019 Kontron Electronics GmbH > + */ > + > +/dts-v1/; > + > +#include "imx8mm-kontron-n8011-som.dtsi" > +#include "imx8mm-kontron-n801x-s.dtsi" > + > +/ { > + model = "Kontron i.MX8MM N8011 S"; > + compatible = "kontron,imx8mm-n8011-s", "kontron,imx8mm-n8011-som", > + "fsl,imx8mm"; > +}; > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-som.dtsi > b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-som.dtsi > new file mode 100644 > index 000000000000..303594867b8f > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-som.dtsi > @@ -0,0 +1,16 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2019 Kontron Electronics GmbH > + */ > + > +#include "imx8mm-kontron-n801x-som.dtsi" > + > +/ { > + model = "Kontron i.MX8MM N8011 SoM"; > + compatible = "kontron,imx8mm-n8011-som", "fsl,imx8mm"; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0x0 0x40000000 0 0xC0000000>; > + }; Isn't the boot loader supposed to filling that in? > +}; > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dtsi > b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dtsi > new file mode 100644 > index 000000000000..d825e52e0beb > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dtsi > @@ -0,0 +1,326 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2019 Kontron Electronics GmbH > + */ > + > +/ { > + aliases { > + ethernet1 = &usbnet; > + }; > + > + /* fixed crystal dedicated to mcp2515 */ > + clk16m: clk16m { I believe a more human readable variant e.g. as follows is preferred: osc_16m: clock-osc-16m > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <16000000>; Also the use of the optional property clock-output-names is recommended. > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_led>; > + > + led1 { > + label = "led1"; > + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; > + linux,default-trigger = "heartbeat"; > + }; > + > + led2 { > + label = "led2"; > + gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; > + }; > + > + led3 { > + label = "led3"; > + gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; > + }; > + > + led4 { > + label = "led4"; > + gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; > + }; > + > + led5 { > + label = "led5"; > + gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; > + }; > + > + led6 { > + label = "led6"; > + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; > + }; > + }; > + > + pwm-beeper { > + compatible = "pwm-beeper"; > + pwms = <&pwm2 0 5000 0>; > + }; > + > + reg_rst_eth2: regulator-rst-eth2 { > + compatible = "regulator-fixed"; > + regulator-name = "rst-usb-eth2"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb_eth2>; > + gpio = <&gpio3 2 GPIO_ACTIVE_LOW>; > + status = "okay"; > + }; > + > + vdd_5v: regulator-5v { I would stick to consistent reg_ pre-fixing. > + compatible = "regulator-fixed"; > + regulator-name = "vdd_5v"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-boot-on; > + regulator-always-on; > + status = "okay"; > + }; > +}; > + > +&ecspi2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi2>; > + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; > + status = "okay"; > + > + can0: can@0 { > + compatible = "microchip,mcp2515"; > + reg = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_can>; > + clocks = <&clk16m>; > + interrupt-parent = <&gpio4>; > + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; > + spi-max-frequency = <100000>; > + vdd-supply = <&vdd_3v3>; > + xceiver-supply = <&vdd_5v>; > + status = "okay"; I find the property ordering a little confusing but that might just be me. > + }; > +}; > + > +&ecspi3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi3>; > + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; > + status = "okay"; > + > + userspi: userspi@0 { > + compatible = "kontron,user-spi"; > + reg = <0>; > + spi-max-frequency = <100000000>; > + status = "okay"; > + }; I thought from earlier discussions you intended to drop that and either specify it from user-space directly or use an overlay instead. > +}; > + > +&fec1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet>; > + phy-mode = "rgmii"; > + phy-reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; > + phy-reset-duration = <100>; > + phy-reset-post-delay = <100>; > + phy-handle = <ðphy>; > + status = "okay"; > + > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethphy: ethernet-phy@0 { > + reg = <0>; > + }; > + }; > +}; > + > +&i2c4 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c4>; > + status = "okay"; > + > + rtc@32 { > + compatible = "epson,rx8900"; > + reg = <0x32>; > + }; > +}; > + > +&pwm2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm2>; > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + uart-has-rtscts; > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + linux,rs485-enabled-at-boot-time; > + uart-has-rtscts; > + status = "okay"; > +}; > + > +&usbotg1 { > + dr_mode = "otg"; > + status = "okay"; > +}; > + > +&usbotg2 { > + dr_mode = "host"; > + disable-over-current; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + > + usb1@1 { > + compatible = "usb424,9514"; > + reg = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + usbnet: usbether@1 { > + compatible = "usb424,ec00"; > + reg = <1>; > + mac-address = [ 00 00 00 00 00 00 ]; > + }; > + }; > +}; > + > +&usdhc2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + vmmc-supply = <&vdd_3v3>; > + vqmmc-supply = <&nvcc_sd>; > + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; > + bus-width = <4>; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio>; > + > + pinctrl_can: cangrp { > + fsl,pins = < > + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 > + >; > + }; > + > + pinctrl_ecspi2: ecspi2grp { > + fsl,pins = < > + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 > + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 > + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 > + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 > + >; > + }; > + > + pinctrl_ecspi3: ecspi3grp { > + fsl,pins = < > + MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 > + MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 > + MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 > + MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 > + >; > + }; > + > + pinctrl_enet: enetgrp { > + fsl,pins = < > + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 > + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 > + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f > + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f > + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f > + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f > + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 > + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 > + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 > + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 > + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f > + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 > + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 > + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f > + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 /* PHY RST */ > + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* ETH IRQ */ > + >; > + }; > + > + pinctrl_gpio_led: gpioledgrp { > + fsl,pins = < > + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 > + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x19 > + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x19 > + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x19 > + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 > + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 > + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 > + >; > + }; > + > + pinctrl_gpio: gpiogrp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 > + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 > + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 > + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 > + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 > + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 > + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 > + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 > + >; > + }; > + > + pinctrl_i2c4: i2c4grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 > + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 > + >; > + }; > + > + pinctrl_pwm2: pwm2grp { > + fsl,pins = < > + MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 > + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 > + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 > + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 > + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 > + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 > + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 > + >; > + }; > + > + pinctrl_usb_eth2: usbeth2grp { > + fsl,pins = < > + MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 > + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 > + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 > + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 > + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 > + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 > + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 > + >; > + }; > +}; > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi > b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi > new file mode 100644 > index 000000000000..207be37522e5 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi > @@ -0,0 +1,281 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2019 Kontron Electronics GmbH > + */ > + > +#include "imx8mm.dtsi" > + > +/ { > + chosen { > + stdout-path = &uart3; > + }; > +}; > + > +&A53_0 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&A53_1 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&A53_2 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&A53_3 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&ddrc { > + operating-points-v2 = <&ddrc_opp_table>; > + > + ddrc_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-25M { > + opp-hz = /bits/ 64 <25000000>; > + }; > + > + opp-100M { > + opp-hz = /bits/ 64 <100000000>; > + }; > + > + opp-750M { > + opp-hz = /bits/ 64 <750000000>; > + }; > + }; > +}; > + > +&ecspi1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi1>; > + cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; > + status = "okay"; > + > + spi-flash@0 { > + compatible = "mxicy,mx25r1635f", "jedec,spi-nor"; > + spi-max-frequency = <80000000>; > + reg = <0>; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + pmic: pca9450@25 { > + compatible = "nxp,pca9450a"; > + reg = <0x25>; > + pinctrl-0 = <&pinctrl_pmic>; > + interrupt-parent = <&gpio1>; > + interrupts = <0 GPIO_ACTIVE_LOW>; > + > + regulators { > + vdd_soc: BUCK1 { > + regulator-name = "BUCK1"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <900000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <3125>; > + }; > + > + vdd_arm: BUCK2 { > + regulator-name = "BUCK2"; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <950000>; > + regulator-boot-on; > + regulator-ramp-delay = <3125>; > + nxp,dvs-run-voltage = <950000>; > + nxp,dvs-standby-voltage = <850000>; > + }; > + > + vdd_dram: BUCK3 { > + regulator-name = "BUCK3"; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <900000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vdd_3v3: BUCK4 { > + regulator-name = "BUCK4"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vdd_1v8: BUCK5 { > + regulator-name = "BUCK5"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + nvcc_dram: BUCK6 { > + regulator-name = "BUCK6"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + nvcc_snvs: LDO1 { > + regulator-name = "LDO1"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vdd_snvs: LDO2 { > + regulator-compatible = "ldo2"; > + regulator-name = "LDO2"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vdda: LDO3 { > + regulator-name = "LDO3"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vdd_phy: LDO4 { > + regulator-name = "LDO4"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + nvcc_sd: LDO5 { > + regulator-name = "LDO5"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + }; > + }; > + }; > +}; > + > +&uart3 { /* console */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart3>; > + status = "okay"; > +}; > + > +&usdhc1 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc1>; > + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; > + vmmc-supply = <&vdd_3v3>; > + vqmmc-supply = <&vdd_1v8>; > + bus-width = <8>; > + non-removable; > + status = "okay"; > +}; > + > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,ext-reset-output; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl_ecspi1: ecspi1grp { > + fsl,pins = < > + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 > + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 > + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 > + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 > + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 > + >; > + }; > + > + pinctrl_pmic: pmicgrp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x41 > + >; > + }; > + > + pinctrl_uart3: uart3grp { > + fsl,pins = < > + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 > + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 > + >; > + }; > + > + pinctrl_usdhc1: usdhc1grp { > + fsl,pins = < > + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 > + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 > + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 > + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 > + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 > + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 > + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 > + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 > + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 > + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 > + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 > + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 > + >; > + }; > + > + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { > + fsl,pins = < > + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 > + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 > + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 > + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 > + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 > + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 > + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 > + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 > + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 > + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 > + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 > + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 > + >; > + }; > + > + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { > + fsl,pins = < > + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 > + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 > + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 > + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 > + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 > + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 > + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 > + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 > + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 > + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 > + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 > + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 > + >; > + }; > +}; Cheers Marcel
Hi Marcel, On 03.07.20 09:56, Marcel Ziswiler wrote: > Hi Frieder > > Nice to see some more i.MX 8M Mini action. Much appreciated! > > On Thu, 2020-07-02 at 16:33 +0200, Schrempf Frieder wrote: >> From: Frieder Schrempf <frieder.schrempf@kontron.de> >> >> Kontron Electronics GmbH offers small and powerful SoMs based on the >> i.MX8MM > > To avoid much confusion in NXP's nomenclature I would recommend writing this always as i.MX 8M Mini. Of course, > in code, using imx8mm is fine. Ok, sounds reasonable. > >> including PMIC, LPDDR4-RAM, eMMC and SPI NOR. >> >> The matching baseboards have the same form factor and similar interfaces >> as the other boards from the Kontron "Board-Line" family, including >> SD card, 1G Ethernet, 100M Ethernet, USB Host/OTG, digital IOs, RS232, >> RS485, CAN, LVDS or HDMI, RTC and much more. >> >> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> >> --- >> .../dts/freescale/imx8mm-kontron-n8010-s.dts | 15 + >> .../freescale/imx8mm-kontron-n8010-som.dtsi | 16 + >> .../dts/freescale/imx8mm-kontron-n8011-s.dts | 15 + >> .../freescale/imx8mm-kontron-n8011-som.dtsi | 16 + >> .../dts/freescale/imx8mm-kontron-n801x-s.dtsi | 326 ++++++++++++++++++ >> .../freescale/imx8mm-kontron-n801x-som.dtsi | 281 +++++++++++++++ >> 6 files changed, 669 insertions(+) >> create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-s.dts >> create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-som.dtsi >> create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-s.dts >> create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-som.dtsi >> create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dtsi >> create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi >> >> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-s.dts b/arch/arm64/boot/dts/freescale/imx8mm- >> kontron-n8010-s.dts >> new file mode 100644 >> index 000000000000..0911f2d0555b >> --- /dev/null >> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-s.dts >> @@ -0,0 +1,15 @@ >> +// SPDX-License-Identifier: GPL-2.0 > > Don't you want to use the more common GPL-2.0+ OR MIT variant which allows for more freedom? At least NXP's > imx8mm.dtsi also uses that. That actually sounds like a good idea. I will change that. > >> +/* >> + * Copyright (C) 2019 Kontron Electronics GmbH > > I know that there is much about 2020 to rather be ignored. Indeed, but I also once learned that you don't change the original date in a copyright notice as it is used to express when the content has been published or created first (and the original version has been online on our server publically since 2019). > >> + */ >> + >> +/dts-v1/; >> + >> +#include "imx8mm-kontron-n8010-som.dtsi" >> +#include "imx8mm-kontron-n801x-s.dtsi" >> + >> +/ { >> + model = "Kontron i.MX8MM N8010 S"; >> + compatible = "kontron,imx8mm-n8010-s", "kontron,imx8mm-n8010-som", >> + "fsl,imx8mm"; > > I believe now with Linux having dropped the strict 80-column line length coding style limit we are allowed to > go up to 100 (;-p). Right, I remember seeing some discussion about extending the column limit. I will need to update my text editor's config. > >> +}; >> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-som.dtsi >> b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-som.dtsi >> new file mode 100644 >> index 000000000000..5b178ce4ce1b >> --- /dev/null >> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-som.dtsi >> @@ -0,0 +1,16 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright (C) 2019 Kontron Electronics GmbH >> + */ >> + >> +#include "imx8mm-kontron-n801x-som.dtsi" >> + >> +/ { >> + model = "Kontron i.MX8MM N8010 SoM"; >> + compatible = "kontron,imx8mm-n8010-som", "fsl,imx8mm"; >> + >> + memory@40000000 { >> + device_type = "memory"; >> + reg = <0x0 0x40000000 0 0x80000000>; >> + }; >> +}; >> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-s.dts b/arch/arm64/boot/dts/freescale/imx8mm- >> kontron-n8011-s.dts >> new file mode 100644 >> index 000000000000..5c44bd77ed32 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-s.dts >> @@ -0,0 +1,15 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright (C) 2019 Kontron Electronics GmbH >> + */ >> + >> +/dts-v1/; >> + >> +#include "imx8mm-kontron-n8011-som.dtsi" >> +#include "imx8mm-kontron-n801x-s.dtsi" >> + >> +/ { >> + model = "Kontron i.MX8MM N8011 S"; >> + compatible = "kontron,imx8mm-n8011-s", "kontron,imx8mm-n8011-som", >> + "fsl,imx8mm"; >> +}; >> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-som.dtsi >> b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-som.dtsi >> new file mode 100644 >> index 000000000000..303594867b8f >> --- /dev/null >> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-som.dtsi >> @@ -0,0 +1,16 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright (C) 2019 Kontron Electronics GmbH >> + */ >> + >> +#include "imx8mm-kontron-n801x-som.dtsi" >> + >> +/ { >> + model = "Kontron i.MX8MM N8011 SoM"; >> + compatible = "kontron,imx8mm-n8011-som", "fsl,imx8mm"; >> + >> + memory@40000000 { >> + device_type = "memory"; >> + reg = <0x0 0x40000000 0 0xC0000000>; >> + }; > > Isn't the boot loader supposed to filling that in? Hm, probably yes. I thought it would be good to have the upstream DT fully describe the modules, including the memory size. But if it is more common or useful, I will fill in the memory size for the smallest configuration (1GB) only and let U-Boot overwrite the value if it detects modules with larger DDR. > >> +}; >> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dtsi >> b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dtsi >> new file mode 100644 >> index 000000000000..d825e52e0beb >> --- /dev/null >> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dtsi >> @@ -0,0 +1,326 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright (C) 2019 Kontron Electronics GmbH >> + */ >> + >> +/ { >> + aliases { >> + ethernet1 = &usbnet; >> + }; >> + >> + /* fixed crystal dedicated to mcp2515 */ >> + clk16m: clk16m { > > I believe a more human readable variant e.g. as follows is preferred: > > osc_16m: clock-osc-16m Ok. > >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <16000000>; > > Also the use of the optional property clock-output-names is recommended. Ok. > >> + }; >> + >> + leds { >> + compatible = "gpio-leds"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_gpio_led>; >> + >> + led1 { >> + label = "led1"; >> + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; >> + linux,default-trigger = "heartbeat"; >> + }; >> + >> + led2 { >> + label = "led2"; >> + gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; >> + }; >> + >> + led3 { >> + label = "led3"; >> + gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; >> + }; >> + >> + led4 { >> + label = "led4"; >> + gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; >> + }; >> + >> + led5 { >> + label = "led5"; >> + gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; >> + }; >> + >> + led6 { >> + label = "led6"; >> + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; >> + }; >> + }; >> + >> + pwm-beeper { >> + compatible = "pwm-beeper"; >> + pwms = <&pwm2 0 5000 0>; >> + }; >> + >> + reg_rst_eth2: regulator-rst-eth2 { >> + compatible = "regulator-fixed"; >> + regulator-name = "rst-usb-eth2"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_usb_eth2>; >> + gpio = <&gpio3 2 GPIO_ACTIVE_LOW>; >> + status = "okay"; >> + }; >> + >> + vdd_5v: regulator-5v { > > I would stick to consistent reg_ pre-fixing. Ok. > >> + compatible = "regulator-fixed"; >> + regulator-name = "vdd_5v"; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + regulator-boot-on; >> + regulator-always-on; >> + status = "okay"; >> + }; >> +}; >> + >> +&ecspi2 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_ecspi2>; >> + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; >> + status = "okay"; >> + >> + can0: can@0 { >> + compatible = "microchip,mcp2515"; >> + reg = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_can>; >> + clocks = <&clk16m>; >> + interrupt-parent = <&gpio4>; >> + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; >> + spi-max-frequency = <100000>; >> + vdd-supply = <&vdd_3v3>; >> + xceiver-supply = <&vdd_5v>; >> + status = "okay"; > > I find the property ordering a little confusing but that might just be me. I think it's "compatible", "reg" and "pinctrl" first, then the other properties in alphabetical order and "status" last. So I'm not really sure what to improve here. > >> + }; >> +}; >> + >> +&ecspi3 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_ecspi3>; >> + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; >> + status = "okay"; >> + >> + userspi: userspi@0 { >> + compatible = "kontron,user-spi"; >> + reg = <0>; >> + spi-max-frequency = <100000000>; >> + status = "okay"; >> + }; > > I thought from earlier discussions you intended to drop that and either specify it from user-space directly or > use an overlay instead. Yes, indeed, but when I learned about the possibility to override the device's driver from userspace, I already had sent out this patch. I will remove the userspi node in the next version. Thanks so far for reviewing! Frieder
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-s.dts new file mode 100644 index 000000000000..0911f2d0555b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-s.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx8mm-kontron-n8010-som.dtsi" +#include "imx8mm-kontron-n801x-s.dtsi" + +/ { + model = "Kontron i.MX8MM N8010 S"; + compatible = "kontron,imx8mm-n8010-s", "kontron,imx8mm-n8010-som", + "fsl,imx8mm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-som.dtsi new file mode 100644 index 000000000000..5b178ce4ce1b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8010-som.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include "imx8mm-kontron-n801x-som.dtsi" + +/ { + model = "Kontron i.MX8MM N8010 SoM"; + compatible = "kontron,imx8mm-n8010-som", "fsl,imx8mm"; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-s.dts new file mode 100644 index 000000000000..5c44bd77ed32 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-s.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx8mm-kontron-n8011-som.dtsi" +#include "imx8mm-kontron-n801x-s.dtsi" + +/ { + model = "Kontron i.MX8MM N8011 S"; + compatible = "kontron,imx8mm-n8011-s", "kontron,imx8mm-n8011-som", + "fsl,imx8mm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-som.dtsi new file mode 100644 index 000000000000..303594867b8f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n8011-som.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include "imx8mm-kontron-n801x-som.dtsi" + +/ { + model = "Kontron i.MX8MM N8011 SoM"; + compatible = "kontron,imx8mm-n8011-som", "fsl,imx8mm"; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0xC0000000>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dtsi new file mode 100644 index 000000000000..d825e52e0beb --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dtsi @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +/ { + aliases { + ethernet1 = &usbnet; + }; + + /* fixed crystal dedicated to mcp2515 */ + clk16m: clk16m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led1 { + label = "led1"; + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "led2"; + gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + }; + + led3 { + label = "led3"; + gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + }; + + led4 { + label = "led4"; + gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + }; + + led5 { + label = "led5"; + gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + }; + + led6 { + label = "led6"; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm2 0 5000 0>; + }; + + reg_rst_eth2: regulator-rst-eth2 { + compatible = "regulator-fixed"; + regulator-name = "rst-usb-eth2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_eth2>; + gpio = <&gpio3 2 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + + vdd_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + status = "okay"; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + can0: can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + clocks = <&clk16m>; + interrupt-parent = <&gpio4>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <100000>; + vdd-supply = <&vdd_3v3>; + xceiver-supply = <&vdd_5v>; + status = "okay"; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + userspi: userspi@0 { + compatible = "kontron,user-spi"; + reg = <0>; + spi-max-frequency = <100000000>; + status = "okay"; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + phy-reset-post-delay = <100>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + usb1@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + usbnet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + mac-address = [ 00 00 00 00 00 00 ]; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vmmc-supply = <&vdd_3v3>; + vqmmc-supply = <&nvcc_sd>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio>; + + pinctrl_can: cangrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 + MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 + MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 + MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 /* PHY RST */ + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* ETH IRQ */ + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x19 + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x19 + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x19 + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 + >; + }; + + pinctrl_usb_eth2: usbeth2grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi new file mode 100644 index 000000000000..207be37522e5 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi @@ -0,0 +1,281 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include "imx8mm.dtsi" + +/ { + chosen { + stdout-path = &uart3; + }; +}; + +&A53_0 { + cpu-supply = <&vdd_arm>; +}; + +&A53_1 { + cpu-supply = <&vdd_arm>; +}; + +&A53_2 { + cpu-supply = <&vdd_arm>; +}; + +&A53_3 { + cpu-supply = <&vdd_arm>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + status = "okay"; + + spi-flash@0 { + compatible = "mxicy,mx25r1635f", "jedec,spi-nor"; + spi-max-frequency = <80000000>; + reg = <0>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pca9450@25 { + compatible = "nxp,pca9450a"; + reg = <0x25>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <0 GPIO_ACTIVE_LOW>; + + regulators { + vdd_soc: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + vdd_arm: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + vdd_dram: BUCK3 { + regulator-name = "BUCK3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_3v3: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_1v8: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + nvcc_dram: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + nvcc_snvs: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_snvs: LDO2 { + regulator-compatible = "ldo2"; + regulator-name = "LDO2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + vdda: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_phy: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + nvcc_sd: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&uart3 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <&vdd_3v3>; + vqmmc-supply = <&vdd_1v8>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x41 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +};