| Message ID | 20200706133341.476881-7-lee.jones@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Fix the final bunch of W=1 issues in USB | expand |
Lee Jones <lee.jones@linaro.org> writes: > Mostly bitrotted argument descriptions/names. Also the removal > of a blank line in the middle of a kerneldoc header, which is > not allowed. > > Fixes the following W=1 kernel build warning(s): > > drivers/usb/gadget/udc/pxa27x_udc.c:398: warning: Function parameter or member 'ep' not described in 'ep_write_UDCCSR' > drivers/usb/gadget/udc/pxa27x_udc.c:398: warning: Excess function parameter 'udc' description in 'ep_write_UDCCSR' > drivers/usb/gadget/udc/pxa27x_udc.c:479: warning: Function parameter or member 'udc' not described in 'set_ep0state' > drivers/usb/gadget/udc/pxa27x_udc.c:479: warning: Excess function parameter 'dev' description in 'set_ep0state' > drivers/usb/gadget/udc/pxa27x_udc.c:506: warning: Excess function parameter 'req' description in 'inc_ep_stats_reqs' > drivers/usb/gadget/udc/pxa27x_udc.c:1476: warning: bad line: > drivers/usb/gadget/udc/pxa27x_udc.c:1697: warning: Function parameter or member 'udc' not described in 'udc_enable' > drivers/usb/gadget/udc/pxa27x_udc.c:1697: warning: Excess function parameter 'dev' description in 'udc_enable' > drivers/usb/gadget/udc/pxa27x_udc.c:1750: warning: Function parameter or member 'g' not described in 'pxa27x_udc_start' > drivers/usb/gadget/udc/pxa27x_udc.c:1750: warning: Excess function parameter 'bind' description in 'pxa27x_udc_start' > drivers/usb/gadget/udc/pxa27x_udc.c:1784: warning: Excess function parameter 'driver' description in 'stop_activity' > drivers/usb/gadget/udc/pxa27x_udc.c:1800: warning: Function parameter or member 'g' not described in 'pxa27x_udc_stop' > drivers/usb/gadget/udc/pxa27x_udc.c:1800: warning: Excess function parameter 'driver' description in 'pxa27x_udc_stop' > drivers/usb/gadget/udc/pxa27x_udc.c:2358: warning: Function parameter or member 'pdev' not described in 'pxa_udc_probe' > drivers/usb/gadget/udc/pxa27x_udc.c:2358: warning: Excess function parameter '_dev' description in 'pxa_udc_probe' > > Cc: Daniel Mack <daniel@zonque.org> > Cc: Haojian Zhuang <haojian.zhuang@gmail.com> > Cc: Robert Jarzmik <robert.jarzmik@free.fr> > Cc: Felipe Balbi <balbi@kernel.org> > Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cheers. -- Robert
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index 78902d13fc275..cfaeca457fa72 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -386,7 +386,7 @@ static inline void udc_clear_mask_UDCCR(struct pxa_udc *udc, int mask) /** * ep_write_UDCCSR - set bits in UDCCSR - * @udc: udc device + * @ep: udc endpoint * @mask: bits to set in UDCCR * * Sets bits in UDCCSR (UDCCSR0 and UDCCSR*). @@ -472,7 +472,7 @@ static int epout_has_pkt(struct pxa_ep *ep) /** * set_ep0state - Set ep0 automata state - * @dev: udc device + * @udc: udc device * @state: state */ static void set_ep0state(struct pxa_udc *udc, int state) @@ -498,7 +498,6 @@ static void ep0_idle(struct pxa_udc *dev) /** * inc_ep_stats_reqs - Update ep stats counts * @ep: physical endpoint - * @req: usb request * @is_in: ep direction (USB_DIR_IN or 0) * */ @@ -1473,7 +1472,6 @@ static void udc_disable(struct pxa_udc *udc); * Context: any * * The UDC should be enabled if : - * - the pullup resistor is connected * - and a gadget driver is bound * - and vbus is sensed (or no vbus sense is available) @@ -1688,7 +1686,7 @@ static void udc_init_data(struct pxa_udc *dev) /** * udc_enable - Enables the udc device - * @dev: udc device + * @udc: udc device * * Enables the udc device : enables clocks, udc interrupts, control endpoint * interrupts, sets usb as UDC client and setups endpoints. @@ -1732,8 +1730,8 @@ static void udc_enable(struct pxa_udc *udc) /** * pxa27x_start - Register gadget driver + * @g: gadget * @driver: gadget driver - * @bind: bind function * * When a driver is successfully registered, it will receive control requests * including set_configuration(), which enables non-control requests. Then @@ -1775,7 +1773,6 @@ static int pxa27x_udc_start(struct usb_gadget *g, /** * stop_activity - Stops udc endpoints * @udc: udc device - * @driver: gadget driver * * Disables all udc endpoints (even control endpoint), report disconnect to * the gadget user. @@ -1792,7 +1789,7 @@ static void stop_activity(struct pxa_udc *udc) /** * pxa27x_udc_stop - Unregister the gadget driver - * @driver: gadget driver + * @g: gadget * * Returns 0 if no error, -ENODEV, -EINVAL otherwise */ @@ -2349,7 +2346,7 @@ MODULE_DEVICE_TABLE(of, udc_pxa_dt_ids); /** * pxa_udc_probe - probes the udc device - * @_dev: platform device + * @pdev: platform device * * Perform basic init : allocates udc clock, creates sysfs files, requests * irq.
Mostly bitrotted argument descriptions/names. Also the removal of a blank line in the middle of a kerneldoc header, which is not allowed. Fixes the following W=1 kernel build warning(s): drivers/usb/gadget/udc/pxa27x_udc.c:398: warning: Function parameter or member 'ep' not described in 'ep_write_UDCCSR' drivers/usb/gadget/udc/pxa27x_udc.c:398: warning: Excess function parameter 'udc' description in 'ep_write_UDCCSR' drivers/usb/gadget/udc/pxa27x_udc.c:479: warning: Function parameter or member 'udc' not described in 'set_ep0state' drivers/usb/gadget/udc/pxa27x_udc.c:479: warning: Excess function parameter 'dev' description in 'set_ep0state' drivers/usb/gadget/udc/pxa27x_udc.c:506: warning: Excess function parameter 'req' description in 'inc_ep_stats_reqs' drivers/usb/gadget/udc/pxa27x_udc.c:1476: warning: bad line: drivers/usb/gadget/udc/pxa27x_udc.c:1697: warning: Function parameter or member 'udc' not described in 'udc_enable' drivers/usb/gadget/udc/pxa27x_udc.c:1697: warning: Excess function parameter 'dev' description in 'udc_enable' drivers/usb/gadget/udc/pxa27x_udc.c:1750: warning: Function parameter or member 'g' not described in 'pxa27x_udc_start' drivers/usb/gadget/udc/pxa27x_udc.c:1750: warning: Excess function parameter 'bind' description in 'pxa27x_udc_start' drivers/usb/gadget/udc/pxa27x_udc.c:1784: warning: Excess function parameter 'driver' description in 'stop_activity' drivers/usb/gadget/udc/pxa27x_udc.c:1800: warning: Function parameter or member 'g' not described in 'pxa27x_udc_stop' drivers/usb/gadget/udc/pxa27x_udc.c:1800: warning: Excess function parameter 'driver' description in 'pxa27x_udc_stop' drivers/usb/gadget/udc/pxa27x_udc.c:2358: warning: Function parameter or member 'pdev' not described in 'pxa_udc_probe' drivers/usb/gadget/udc/pxa27x_udc.c:2358: warning: Excess function parameter '_dev' description in 'pxa_udc_probe' Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/usb/gadget/udc/pxa27x_udc.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-)