| Message ID | 20200706143443.9855-3-mkl@pengutronix.de (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 0bc7b8a2c307c52dbc9f3b5bc7855e93d281098a |
| Headers | show |
| Series | spi: spi-sun6i: One fix and some improvements | expand |
diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index fa11cc0e809b..64b4d8077010 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -291,9 +291,11 @@ static int sun6i_spi_transfer_one(struct spi_master *master, div_cdr2 = DIV_ROUND_UP(div_cdr1, 2); if (div_cdr2 <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) { reg = SUN6I_CLK_CTL_CDR2(div_cdr2 - 1) | SUN6I_CLK_CTL_DRS; + tfr->effective_speed_hz = mclk_rate / (2 * div_cdr2); } else { div = min(SUN6I_CLK_CTL_CDR1_MASK, order_base_2(div_cdr1)); reg = SUN6I_CLK_CTL_CDR1(div); + tfr->effective_speed_hz = mclk_rate / (1 << div); } sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg);
This patch implementes the reporting of the effectivly used speed_hz for the transfer by setting tfr->effective_speed_hz. See the following patch, which adds this feature to the SPI core for more information: 5d7e2b5ed585 spi: core: allow reporting the effectivly used speed_hz for a transfer Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- drivers/spi/spi-sun6i.c | 2 ++ 1 file changed, 2 insertions(+)