diff mbox series

[v30,14/16] ARM: dts: n900: Add reg property to the LP5523 channel node

Message ID 20200713154544.1683-15-dmurphy@ti.com (mailing list archive)
State New, archived
Headers show
Series Multicolor Framework v30 | expand

Commit Message

Dan Murphy July 13, 2020, 3:45 p.m. UTC 
Add the reg property to each channel node.  This update is
to accommodate the multicolor framework.  In addition to the
accommodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
CC: Tony Lindgren <tony@atomide.com>
CC: "Benoît Cousson" <bcousson@baylibre.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
 arch/arm/boot/dts/omap3-n900.dts | 29 ++++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 4089d97405c9..ebe93b06b4f7 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -618,63 +618,74 @@  indicator {
 	};
 
 	lp5523: lp5523@32 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
 		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
 
-		chan0 {
+		chan@0 {
 			chan-name = "lp5523:kb1";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <0>;
 		};
 
-		chan1 {
+		chan@1 {
 			chan-name = "lp5523:kb2";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <1>;
 		};
 
-		chan2 {
+		chan@2 {
 			chan-name = "lp5523:kb3";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <2>;
 		};
 
-		chan3 {
+		chan@3 {
 			chan-name = "lp5523:kb4";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <3>;
 		};
 
-		chan4 {
+		chan@4 {
 			chan-name = "lp5523:b";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <4>;
 		};
 
-		chan5 {
+		chan@5 {
 			chan-name = "lp5523:g";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <5>;
 		};
 
-		chan6 {
+		chan@6 {
 			chan-name = "lp5523:r";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <6>;
 		};
 
-		chan7 {
+		chan@7 {
 			chan-name = "lp5523:kb5";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <7>;
 		};
 
-		chan8 {
+		chan@8 {
 			chan-name = "lp5523:kb6";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <8>;
 		};
 	};