diff mbox series

[v4,4/4] arm64: dts: marvell: add SMMU support

Message ID 20200715070649.18733-5-tn@semihalf.com (mailing list archive)
State New, archived
Headers show
Series Add system mmu support for Armada-806 | expand

Commit Message

Tomasz Nowicki July 15, 2020, 7:06 a.m. UTC 
From: Marcin Wojtas <mw@semihalf.com>

Add IOMMU node for Marvell AP806 based SoCs together with platform
and PCI device Stream ID mapping.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
---
 arch/arm64/boot/dts/marvell/armada-7040.dtsi  | 28 +++++++++++++
 arch/arm64/boot/dts/marvell/armada-8040.dtsi  | 40 +++++++++++++++++++
 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 18 +++++++++
 3 files changed, 86 insertions(+)

Comments

Gregory CLEMENT July 18, 2020, 9:08 p.m. UTC | #1 
Tomasz Nowicki <tn@semihalf.com> writes:

> From: Marcin Wojtas <mw@semihalf.com>
>
> Add IOMMU node for Marvell AP806 based SoCs together with platform
> and PCI device Stream ID mapping.
>
> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
> Signed-off-by: Tomasz Nowicki <tn@semihalf.com>

Applied on mvebu/dt64

Thanks,

Gregory
> ---
>  arch/arm64/boot/dts/marvell/armada-7040.dtsi  | 28 +++++++++++++
>  arch/arm64/boot/dts/marvell/armada-8040.dtsi  | 40 +++++++++++++++++++
>  arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 18 +++++++++
>  3 files changed, 86 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
> index 47247215770d..7a3198cd7a07 100644
> --- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
> @@ -14,3 +14,31 @@
>  	compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
>  		     "marvell,armada-ap806";
>  };
> +
> +&smmu {
> +	status = "okay";
> +};
> +
> +&cp0_pcie0 {
> +	iommu-map =
> +		<0x0   &smmu 0x480 0x20>,
> +		<0x100 &smmu 0x4a0 0x20>,
> +		<0x200 &smmu 0x4c0 0x20>;
> +	iommu-map-mask = <0x031f>;
> +};
> +
> +&cp0_sata0 {
> +	iommus = <&smmu 0x444>;
> +};
> +
> +&cp0_sdhci0 {
> +	iommus = <&smmu 0x445>;
> +};
> +
> +&cp0_usb3_0 {
> +	iommus = <&smmu 0x440>;
> +};
> +
> +&cp0_usb3_1 {
> +	iommus = <&smmu 0x441>;
> +};
> diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
> index 7699b19224c2..79e8ce59baa8 100644
> --- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
> @@ -15,6 +15,18 @@
>  		     "marvell,armada-ap806";
>  };
>  
> +&smmu {
> +	status = "okay";
> +};
> +
> +&cp0_pcie0 {
> +	iommu-map =
> +		<0x0   &smmu 0x480 0x20>,
> +		<0x100 &smmu 0x4a0 0x20>,
> +		<0x200 &smmu 0x4c0 0x20>;
> +	iommu-map-mask = <0x031f>;
> +};
> +
>  /* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
>   * in CP master is not connected (by package) to the oscillator. So
>   * disable it. However, the RTC clock in CP slave is connected to the
> @@ -23,3 +35,31 @@
>  &cp0_rtc {
>  	status = "disabled";
>  };
> +
> +&cp0_sata0 {
> +	iommus = <&smmu 0x444>;
> +};
> +
> +&cp0_sdhci0 {
> +	iommus = <&smmu 0x445>;
> +};
> +
> +&cp0_usb3_0 {
> +	iommus = <&smmu 0x440>;
> +};
> +
> +&cp0_usb3_1 {
> +	iommus = <&smmu 0x441>;
> +};
> +
> +&cp1_sata0 {
> +	iommus = <&smmu 0x454>;
> +};
> +
> +&cp1_usb3_0 {
> +	iommus = <&smmu 0x450>;
> +};
> +
> +&cp1_usb3_1 {
> +	iommus = <&smmu 0x451>;
> +};
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
> index 7f9b9a647717..12e477f1aeb9 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
> @@ -56,6 +56,24 @@
>  			compatible = "simple-bus";
>  			ranges = <0x0 0x0 0xf0000000 0x1000000>;
>  
> +			smmu: iommu@5000000 {
> +				compatible = "marvell,ap806-smmu-500", "arm,mmu-500";
> +				reg = <0x100000 0x100000>;
> +				dma-coherent;
> +				#iommu-cells = <1>;
> +				#global-interrupts = <1>;
> +				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
>  			gic: interrupt-controller@210000 {
>  				compatible = "arm,gic-400";
>  				#interrupt-cells = <3>;
> -- 
> 2.17.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
index 47247215770d..7a3198cd7a07 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
@@ -14,3 +14,31 @@ 
 	compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
 		     "marvell,armada-ap806";
 };
+
+&smmu {
+	status = "okay";
+};
+
+&cp0_pcie0 {
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
+&cp0_sata0 {
+	iommus = <&smmu 0x444>;
+};
+
+&cp0_sdhci0 {
+	iommus = <&smmu 0x445>;
+};
+
+&cp0_usb3_0 {
+	iommus = <&smmu 0x440>;
+};
+
+&cp0_usb3_1 {
+	iommus = <&smmu 0x441>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
index 7699b19224c2..79e8ce59baa8 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -15,6 +15,18 @@ 
 		     "marvell,armada-ap806";
 };
 
+&smmu {
+	status = "okay";
+};
+
+&cp0_pcie0 {
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
 /* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
  * in CP master is not connected (by package) to the oscillator. So
  * disable it. However, the RTC clock in CP slave is connected to the
@@ -23,3 +35,31 @@ 
 &cp0_rtc {
 	status = "disabled";
 };
+
+&cp0_sata0 {
+	iommus = <&smmu 0x444>;
+};
+
+&cp0_sdhci0 {
+	iommus = <&smmu 0x445>;
+};
+
+&cp0_usb3_0 {
+	iommus = <&smmu 0x440>;
+};
+
+&cp0_usb3_1 {
+	iommus = <&smmu 0x441>;
+};
+
+&cp1_sata0 {
+	iommus = <&smmu 0x454>;
+};
+
+&cp1_usb3_0 {
+	iommus = <&smmu 0x450>;
+};
+
+&cp1_usb3_1 {
+	iommus = <&smmu 0x451>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 7f9b9a647717..12e477f1aeb9 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -56,6 +56,24 @@ 
 			compatible = "simple-bus";
 			ranges = <0x0 0x0 0xf0000000 0x1000000>;
 
+			smmu: iommu@5000000 {
+				compatible = "marvell,ap806-smmu-500", "arm,mmu-500";
+				reg = <0x100000 0x100000>;
+				dma-coherent;
+				#iommu-cells = <1>;
+				#global-interrupts = <1>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			gic: interrupt-controller@210000 {
 				compatible = "arm,gic-400";
 				#interrupt-cells = <3>;