new file mode 100644
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,k3-dsp-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI K3 DSP devices
+
+maintainers:
+ - Suman Anna <s-anna@ti.com>
+
+description: |
+ The TI K3 family of SoCs usually have one or more TI DSP Core sub-systems
+ that are used to offload some of the processor-intensive tasks or algorithms,
+ for achieving various system level goals.
+
+ These processor sub-systems usually contain additional sub-modules like
+ L1 and/or L2 caches/SRAMs, an Interrupt Controller, an external memory
+ controller, a dedicated local power/sleep controller etc. The DSP processor
+ cores in the K3 SoCs are usually either a TMS320C66x CorePac processor or a
+ TMS320C71x CorePac processor.
+
+ Each DSP Core sub-system is represented as a single DT node. Each node has a
+ number of required or optional properties that enable the OS running on the
+ host processor (Arm CorePac) to perform the device management of the remote
+ processor and to communicate with the remote processor.
+
+allOf:
+ - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+properties:
+ compatible:
+ const: ti,j721e-c66-dsp
+ description:
+ Use "ti,j721e-c66-dsp" for C66x DSPs on K3 J721E SoCs
+
+ reg:
+ items:
+ - description: Address and Size of the L2 SRAM internal memory region
+ - description: Address and Size of the L1 PRAM internal memory region
+ - description: Address and Size of the L1 DRAM internal memory region
+
+ reg-names:
+ items:
+ - const: l2sram
+ - const: l1pram
+ - const: l1dram
+
+ resets:
+ description: |
+ Should contain the phandle to the reset controller node managing the
+ local resets for this device, and a reset specifier.
+ maxItems: 1
+
+ firmware-name:
+ description: |
+ Should contain the name of the default firmware image
+ file located on the firmware search path
+
+ mboxes:
+ description: |
+ OMAP Mailbox specifier denoting the sub-mailbox, to be used for
+ communication with the remote processor. This property should match
+ with the sub-mailbox node used in the firmware image.
+ maxItems: 1
+
+ memory-region:
+ minItems: 2
+ maxItems: 8
+ description: |
+ phandle to the reserved memory nodes to be associated with the remoteproc
+ device. There should be at least two reserved memory nodes defined. The
+ reserved memory nodes should be carveout nodes, and should be defined as
+ per the bindings in
+ Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+ items:
+ - description: region used for dynamic DMA allocations like vrings and
+ vring buffers
+ - description: region reserved for firmware image sections
+ additionalItems: true
+
+# Optional properties:
+# --------------------
+
+ sram:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ minItems: 1
+ maxItems: 4
+ description: |
+ phandles to one or more reserved on-chip SRAM regions. The regions
+ should be defined as child nodes of the respective SRAM node, and
+ should be defined as per the generic bindings in,
+ Documentation/devicetree/bindings/sram/sram.yaml
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - ti,sci
+ - ti,sci-dev-id
+ - ti,sci-proc-ids
+ - resets
+ - firmware-name
+ - mboxes
+ - memory-region
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ / {
+ model = "Texas Instruments K3 J721E SoC";
+ compatible = "ti,j721e";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ bus@100000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+ <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
+ <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>; /* C66_1 */
+
+ /* J721E C66_0 DSP node */
+ dsp@4d80800000 {
+ compatible = "ti,j721e-c66-dsp";
+ reg = <0x4d 0x80800000 0x00 0x00048000>,
+ <0x4d 0x80e00000 0x00 0x00008000>,
+ <0x4d 0x80f00000 0x00 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <142>;
+ ti,sci-proc-ids = <0x03 0xFF>;
+ resets = <&k3_reset 142 1>;
+ firmware-name = "j7-c66_0-fw";
+ memory-region = <&c66_0_dma_memory_region>,
+ <&c66_0_memory_region>;
+ mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
+ };
+ };
+ };