[1/3] ARM: configs: at91: sama5: add support for KSZ ethernet switches

Commit Message

Codrin Ciubotariu July 23, 2020, 4:24 p.m. UTC

From: Razvan Stefanescu <[e-mail]>

Enable DSA and KSZ9477 support as modules. Ethernet switches are used by
the SAMA5D2-ICP board.

Signed-off-by: Razvan Stefanescu <[e-mail]>
Signed-off-by: Codrin Ciubotariu <[e-mail]>
---
 arch/arm/configs/sama5_defconfig | 3 +++
 1 file changed, 3 insertions(+)

Comments

Alexandre Belloni July 24, 2020, 10:24 p.m. UTC | #1

On Thu, 23 Jul 2020 19:24:32 +0300, Codrin Ciubotariu wrote:
> Enable DSA and KSZ9477 support as modules. Ethernet switches are used by
> the SAMA5D2-ICP board.

Applied, thanks!

[1/3] ARM: configs: at91: sama5: add support for KSZ ethernet switches
      commit: 6dadeab7d260eaa410649a48d8368e4d3237377d
[2/3] ARM: configs: at91: sama5: enable bridge and VLAN filtering
      commit: 33d8c87ef47f5303dca851f320611552bc84e32f
[3/3] ARM: configs: at91: sama5: enable CAN PLATFORM driver
      commit: c12b539787efff5b4fc5abac1debf3ea1901348e

Best regards,

Patch

diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index f688443fe7bf..123b95c1447a 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -49,6 +49,7 @@  CONFIG_IP_PNP_RARP=y
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
 CONFIG_IPV6_SIT_6RD=y
+CONFIG_NET_DSA=m
 CONFIG_CAN=y
 CONFIG_CAN_AT91=y
 CONFIG_CAN_M_CAN=y
@@ -80,6 +81,8 @@  CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
+CONFIG_NET_DSA_MICROCHIP_KSZ9477=m
+CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI=m
 CONFIG_MACB=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CIRRUS is not set