[2/2] arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances

Commit Message

Kishon Vijay Abraham I July 24, 2020, 5:56 a.m. UTC

J721E Common Processor Board has PCIe connectors for the 1st three PCIe
instances. Configure the three PCIe instances in RC mode and disable the
4th PCIe instance.

Signed-off-by: Kishon Vijay Abraham I <[e-mail]>
---
 .../dts/ti/k3-j721e-common-proc-board.dts     | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 8bc1e6ecc50e..29be88811132 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -651,3 +651,83 @@ 
 
 	status = "okay";
 };
+
+&serdes0 {
+	serdes0_pcie_link: link@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&serdes1 {
+	serdes1_pcie_link: link@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+	};
+};
+
+&serdes2 {
+	serdes2_pcie_link: link@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz2 1>, <&serdes_wiz2 2>;
+	};
+};
+
+&pcie0_rc {
+	reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&pcie1_rc {
+	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes1_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&pcie2_rc {
+	reset-gpios = <&exp2 20 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes2_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&pcie0_ep {
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+	status = "disabled";
+};
+
+&pcie1_ep {
+	phys = <&serdes1_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+	status = "disabled";
+};
+
+&pcie2_ep {
+	phys = <&serdes2_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+	status = "disabled";
+};
+
+&pcie3_rc {
+	status = "disabled";
+};
+
+&pcie3_ep {
+	status = "disabled";
+};