@@ -223,7 +223,7 @@ &wkup_gpio1 {
};
&mailbox0_cluster0 {
- interrupts = <214 0>;
+ interrupts = <436>;
mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
ti,mbox-rx = <0 0 0>;
@@ -237,7 +237,7 @@ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
};
&mailbox0_cluster1 {
- interrupts = <215 0>;
+ interrupts = <432>;
mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
ti,mbox-rx = <0 0 0>;
@@ -251,7 +251,7 @@ mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
};
&mailbox0_cluster2 {
- interrupts = <216 0>;
+ interrupts = <428>;
mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
ti,mbox-rx = <0 0 0>;
@@ -265,7 +265,7 @@ mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
};
&mailbox0_cluster3 {
- interrupts = <217 0>;
+ interrupts = <424>;
mbox_c66_0: mbox-c66-0 {
ti,mbox-rx = <0 0 0>;
@@ -279,7 +279,7 @@ mbox_c66_1: mbox-c66-1 {
};
&mailbox0_cluster4 {
- interrupts = <218 0>;
+ interrupts = <420>;
mbox_c71_0: mbox-c71-0 {
ti,mbox-rx = <0 0 0>;
@@ -45,10 +45,10 @@ main_gpio_intr: interrupt-controller0 {
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <1>;
ti,sci = <&dmsc>;
- ti,sci-dst-id = <14>;
- ti,sci-rm-range-girq = <0x1>;
+ ti,sci-dev-id = <131>;
+ ti,interrupt-ranges = <8 392 56>;
};
main_navss {
@@ -66,10 +66,12 @@ main_navss_intr: interrupt-controller1 {
ti,intr-trigger-type = <4>;
interrupt-controller;
interrupt-parent = <&gic500>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <1>;
ti,sci = <&dmsc>;
- ti,sci-dst-id = <14>;
- ti,sci-rm-range-girq = <0>, <2>;
+ ti,sci-dev-id = <213>;
+ ti,interrupt-ranges = <0 64 64>,
+ <64 448 64>,
+ <128 672 64>;
};
main_udmass_inta: interrupt-controller@33d00000 {
@@ -80,8 +82,7 @@ main_udmass_inta: interrupt-controller@33d00000 {
msi-controller;
ti,sci = <&dmsc>;
ti,sci-dev-id = <209>;
- ti,sci-rm-range-vint = <0xa>;
- ti,sci-rm-range-global-event = <0xd>;
+ ti,interrupt-ranges = <0 0 256>;
};
secure_proxy_main: mailbox@32c00000 {
@@ -261,7 +262,7 @@ cpts@310d0000 {
reg-names = "cpts";
clocks = <&k3_clks 201 1>;
clock-names = "cpts";
- interrupts-extended = <&main_navss_intr 201 0>;
+ interrupts-extended = <&main_navss_intr 391>;
interrupt-names = "cpts";
ti,cpts-periodic-outputs = <6>;
ti,cpts-ext-ts-inputs = <8>;
@@ -413,8 +414,8 @@ main_gpio0: gpio@600000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
- interrupts = <105 0>, <105 1>, <105 2>, <105 3>,
- <105 4>, <105 5>, <105 6>, <105 7>;
+ interrupts = <256>, <257>, <258>, <259>,
+ <260>, <261>, <262>, <263>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <128>;
@@ -430,7 +431,7 @@ main_gpio1: gpio@601000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
- interrupts = <106 0>, <106 1>, <106 2>;
+ interrupts = <288>, <289>, <290>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <36>;
@@ -446,8 +447,8 @@ main_gpio2: gpio@610000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
- interrupts = <107 0>, <107 1>, <107 2>, <107 3>,
- <107 4>, <107 5>, <107 6>, <107 7>;
+ interrupts = <264>, <265>, <266>, <267>,
+ <268>, <269>, <270>, <271>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <128>;
@@ -463,7 +464,7 @@ main_gpio3: gpio@611000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
- interrupts = <108 0>, <108 1>, <108 2>;
+ interrupts = <292>, <293>, <294>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <36>;
@@ -479,8 +480,8 @@ main_gpio4: gpio@620000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
- interrupts = <109 0>, <109 1>, <109 2>, <109 3>,
- <109 4>, <109 5>, <109 6>, <109 7>;
+ interrupts = <272>, <273>, <274>, <275>,
+ <276>, <277>, <278>, <279>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <128>;
@@ -496,7 +497,7 @@ main_gpio5: gpio@621000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
- interrupts = <110 0>, <110 1>, <110 2>;
+ interrupts = <296>, <297>, <298>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <36>;
@@ -512,8 +513,8 @@ main_gpio6: gpio@630000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
- interrupts = <111 0>, <111 1>, <111 2>, <111 3>,
- <111 4>, <111 5>, <111 6>, <111 7>;
+ interrupts = <280>, <281>, <282>, <283>,
+ <284>, <285>, <286>, <287>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <128>;
@@ -529,7 +530,7 @@ main_gpio7: gpio@631000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
- interrupts = <112 0>, <112 1>, <112 2>;
+ interrupts = <300>, <301>, <302>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <36>;
@@ -96,9 +96,10 @@ wkup_gpio_intr: interrupt-controller2 {
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <1>;
ti,sci = <&dmsc>;
- ti,sci-dst-id = <14>;
+ ti,sci-dev-id = <137>;
+ ti,interrupt-ranges = <16 960 16>;
ti,sci-rm-range-girq = <0x5>;
};
@@ -108,8 +109,7 @@ wkup_gpio0: gpio@42110000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&wkup_gpio_intr>;
- interrupts = <113 0>, <113 1>, <113 2>,
- <113 3>, <113 4>, <113 5>;
+ interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <84>;
@@ -125,8 +125,7 @@ wkup_gpio1: gpio@42100000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&wkup_gpio_intr>;
- interrupts = <114 0>, <114 1>, <114 2>,
- <114 3>, <114 4>, <114 5>;
+ interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <84>;
Update the INTA and INTR dt nodes to the latest DT bindings. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> --- .../dts/ti/k3-j721e-common-proc-board.dts | 10 ++--- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 43 ++++++++++--------- .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 11 +++-- 3 files changed, 32 insertions(+), 32 deletions(-)