@@ -555,7 +555,7 @@ ringacc: ringacc@3c000000 {
<0x0 0x33000000 0x0 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
ti,num-rings = <818>;
- ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
+ ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
ti,dma-ring-reset-quirk;
ti,sci = <&dmsc>;
ti,sci-dev-id = <187>;
@@ -575,11 +575,11 @@ main_udmap: dma-controller@31150000 {
ti,sci-dev-id = <188>;
ti,ringacc = <&ringacc>;
- ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
- <0x2>; /* TX_CHAN */
- ti,sci-rm-range-rchan = <0x4>, /* RX_HCHAN */
- <0x5>; /* RX_CHAN */
- ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
+ ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
+ <0xd>; /* TX_CHAN */
+ ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
+ <0xa>; /* RX_CHAN */
+ ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
};
cpts@310d0000 {
@@ -134,7 +134,7 @@ mcu_ringacc: ringacc@2b800000 {
<0x0 0x2a500000 0x0 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
ti,num-rings = <286>;
- ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
+ ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
ti,dma-ring-reset-quirk;
ti,sci = <&dmsc>;
ti,sci-dev-id = <195>;
@@ -154,11 +154,11 @@ mcu_udmap: dma-controller@285c0000 {
ti,sci-dev-id = <194>;
ti,ringacc = <&mcu_ringacc>;
- ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
- <0x2>; /* TX_CHAN */
- ti,sci-rm-range-rchan = <0x3>, /* RX_HCHAN */
- <0x4>; /* RX_CHAN */
- ti,sci-rm-range-rflow = <0x5>; /* GP RFLOW */
+ ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
+ <0xd>; /* TX_CHAN */
+ ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
+ <0xa>; /* RX_CHAN */
+ ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
};
};
Update the ringacc and udma dt nodes to use the latest RM resource types similar to the ones used in k3-j721e dt nodes. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 12 ++++++------ arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-)