Message ID | 20200730132446.3139980-4-megous@megous.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Add support for vibrator motor for TBS A711 Tablet | expand |
Hi Ondrej, On 20-07-30 15:24, Ondrej Jirman wrote: > The board has a vibrator motor. Hook it to the input subsystem. > > According to the PMIC specification, LDO needs to be enabled (value 0b11) > to achieve the specified max driving current of 150mA. We can't drive > the motor with just GPIO mode. > > In GPIO mode the chip is probably just using the regular CMOS logic > output circuitry (typically limited to around 20-35mA, but not specified > in this datasheet). > > Signed-off-by: Ondrej Jirman <megous@megous.com> > --- > arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts > index bfc9bb277a49..a278a1e33930 100644 > --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts > +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts > @@ -99,6 +99,11 @@ panel_input: endpoint { > }; > }; > > + vibrator { > + compatible = "gpio-vibrator"; > + vcc-supply = <®_ldo_io1>; > + }; Please keep the alphabetical order. I also would merge patch 3 and 4 into one since they are realted changes. Regards, Marco > + > reg_gps: reg-gps { > compatible = "regulator-fixed"; > regulator-name = "gps";
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index bfc9bb277a49..a278a1e33930 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -99,6 +99,11 @@ panel_input: endpoint { }; }; + vibrator { + compatible = "gpio-vibrator"; + vcc-supply = <®_ldo_io1>; + }; + reg_gps: reg-gps { compatible = "regulator-fixed"; regulator-name = "gps";
The board has a vibrator motor. Hook it to the input subsystem. According to the PMIC specification, LDO needs to be enabled (value 0b11) to achieve the specified max driving current of 150mA. We can't drive the motor with just GPIO mode. In GPIO mode the chip is probably just using the regular CMOS logic output circuitry (typically limited to around 20-35mA, but not specified in this datasheet). Signed-off-by: Ondrej Jirman <megous@megous.com> --- arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 5 +++++ 1 file changed, 5 insertions(+)