diff mbox series

clk: bcm2835: Do not use prediv with bcm2711's PLLs

Message ID 20200730141337.12753-1-nsaenzjulienne@suse.de (mailing list archive)
State New, archived
Headers show
Series clk: bcm2835: Do not use prediv with bcm2711's PLLs | expand

Commit Message

Nicolas Saenz Julienne July 30, 2020, 2:13 p.m. UTC 
Contrary to previous SoCs, bcm2711 doesn't have a prescaler in the PLL
feedback loop. Bypass it by zeroing fb_prediv_mask.

Note that, since the prediv configuration bits were re-purposed, this
was triggering a miscalculation on all clock hanging from the VPU clock,
notably the aux UART, making its output unintelligible.

Fixes: 42de9ad400af ("clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---

FYI relevant discussion with RPi engineers:
https://github.com/raspberrypi/firmware/issues/1435#issuecomment-666242077

 drivers/clk/bcm/clk-bcm2835.c | 79 +++++++++++++++++++++++++++++++++--
 1 file changed, 75 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 027eba31f793..acf499d26263 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -454,6 +454,16 @@  static const struct bcm2835_pll_ana_bits bcm2835_ana_default = {
 	.fb_prediv_mask = BIT(14),
 };
 
+static const struct bcm2835_pll_ana_bits bcm2711_ana_default = {
+	.mask0 = 0,
+	.set0 = 0,
+	.mask1 = A2W_PLL_KI_MASK | A2W_PLL_KP_MASK,
+	.set1 = (2 << A2W_PLL_KI_SHIFT) | (8 << A2W_PLL_KP_SHIFT),
+	.mask3 = A2W_PLL_KA_MASK,
+	.set3 = (2 << A2W_PLL_KA_SHIFT),
+	.fb_prediv_mask = 0, /* No prediv in bcm2711 */
+};
+
 static const struct bcm2835_pll_ana_bits bcm2835_ana_pllh = {
 	.mask0 = A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK,
 	.set0 = (2 << A2W_PLLH_KA_SHIFT) | (2 << A2W_PLLH_KI_LOW_SHIFT),
@@ -1631,7 +1641,7 @@  static const struct bcm2835_clk_desc clk_desc_array[] = {
 	 * AUDIO domain is on.
 	 */
 	[BCM2835_PLLA]		= REGISTER_PLL(
-		SOC_ALL,
+		SOC_BCM2835,
 		.name = "plla",
 		.cm_ctrl_reg = CM_PLLA,
 		.a2w_ctrl_reg = A2W_PLLA_CTRL,
@@ -1642,6 +1652,21 @@  static const struct bcm2835_clk_desc clk_desc_array[] = {
 
 		.ana = &bcm2835_ana_default,
 
+		.min_rate = 600000000u,
+		.max_rate = 2400000000u,
+		.max_fb_rate = BCM2835_MAX_FB_RATE),
+	[BCM2835_PLLA]		= REGISTER_PLL(
+		SOC_BCM2711,
+		.name = "plla",
+		.cm_ctrl_reg = CM_PLLA,
+		.a2w_ctrl_reg = A2W_PLLA_CTRL,
+		.frac_reg = A2W_PLLA_FRAC,
+		.ana_reg_base = A2W_PLLA_ANA0,
+		.reference_enable_mask = A2W_XOSC_CTRL_PLLA_ENABLE,
+		.lock_mask = CM_LOCK_FLOCKA,
+
+		.ana = &bcm2711_ana_default,
+
 		.min_rate = 600000000u,
 		.max_rate = 2400000000u,
 		.max_fb_rate = BCM2835_MAX_FB_RATE),
@@ -1687,7 +1712,7 @@  static const struct bcm2835_clk_desc clk_desc_array[] = {
 
 	/* PLLB is used for the ARM's clock. */
 	[BCM2835_PLLB]		= REGISTER_PLL(
-		SOC_ALL,
+		SOC_BCM2835,
 		.name = "pllb",
 		.cm_ctrl_reg = CM_PLLB,
 		.a2w_ctrl_reg = A2W_PLLB_CTRL,
@@ -1698,6 +1723,22 @@  static const struct bcm2835_clk_desc clk_desc_array[] = {
 
 		.ana = &bcm2835_ana_default,
 
+		.min_rate = 600000000u,
+		.max_rate = 3000000000u,
+		.max_fb_rate = BCM2835_MAX_FB_RATE,
+		.flags = CLK_GET_RATE_NOCACHE),
+	[BCM2835_PLLB]		= REGISTER_PLL(
+		SOC_BCM2711,
+		.name = "pllb",
+		.cm_ctrl_reg = CM_PLLB,
+		.a2w_ctrl_reg = A2W_PLLB_CTRL,
+		.frac_reg = A2W_PLLB_FRAC,
+		.ana_reg_base = A2W_PLLB_ANA0,
+		.reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
+		.lock_mask = CM_LOCK_FLOCKB,
+
+		.ana = &bcm2711_ana_default,
+
 		.min_rate = 600000000u,
 		.max_rate = 3000000000u,
 		.max_fb_rate = BCM2835_MAX_FB_RATE,
@@ -1720,7 +1761,7 @@  static const struct bcm2835_clk_desc clk_desc_array[] = {
 	 * AUDIO domain is on.
 	 */
 	[BCM2835_PLLC]		= REGISTER_PLL(
-		SOC_ALL,
+		SOC_BCM2835,
 		.name = "pllc",
 		.cm_ctrl_reg = CM_PLLC,
 		.a2w_ctrl_reg = A2W_PLLC_CTRL,
@@ -1731,6 +1772,21 @@  static const struct bcm2835_clk_desc clk_desc_array[] = {
 
 		.ana = &bcm2835_ana_default,
 
+		.min_rate = 600000000u,
+		.max_rate = 3000000000u,
+		.max_fb_rate = BCM2835_MAX_FB_RATE),
+	[BCM2835_PLLC]		= REGISTER_PLL(
+		SOC_BCM2711,
+		.name = "pllc",
+		.cm_ctrl_reg = CM_PLLC,
+		.a2w_ctrl_reg = A2W_PLLC_CTRL,
+		.frac_reg = A2W_PLLC_FRAC,
+		.ana_reg_base = A2W_PLLC_ANA0,
+		.reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
+		.lock_mask = CM_LOCK_FLOCKC,
+
+		.ana = &bcm2711_ana_default,
+
 		.min_rate = 600000000u,
 		.max_rate = 3000000000u,
 		.max_fb_rate = BCM2835_MAX_FB_RATE),
@@ -1782,7 +1838,7 @@  static const struct bcm2835_clk_desc clk_desc_array[] = {
 	 * AUDIO domain is on.
 	 */
 	[BCM2835_PLLD]		= REGISTER_PLL(
-		SOC_ALL,
+		SOC_BCM2835,
 		.name = "plld",
 		.cm_ctrl_reg = CM_PLLD,
 		.a2w_ctrl_reg = A2W_PLLD_CTRL,
@@ -1793,6 +1849,21 @@  static const struct bcm2835_clk_desc clk_desc_array[] = {
 
 		.ana = &bcm2835_ana_default,
 
+		.min_rate = 600000000u,
+		.max_rate = 2400000000u,
+		.max_fb_rate = BCM2835_MAX_FB_RATE),
+	[BCM2835_PLLD]		= REGISTER_PLL(
+		SOC_BCM2711,
+		.name = "plld",
+		.cm_ctrl_reg = CM_PLLD,
+		.a2w_ctrl_reg = A2W_PLLD_CTRL,
+		.frac_reg = A2W_PLLD_FRAC,
+		.ana_reg_base = A2W_PLLD_ANA0,
+		.reference_enable_mask = A2W_XOSC_CTRL_DDR_ENABLE,
+		.lock_mask = CM_LOCK_FLOCKD,
+
+		.ana = &bcm2711_ana_default,
+
 		.min_rate = 600000000u,
 		.max_rate = 2400000000u,
 		.max_fb_rate = BCM2835_MAX_FB_RATE),