From patchwork Mon Aug 3 09:35:54 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11697805 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 90E6E13B1 for ; Mon, 3 Aug 2020 09:45:59 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 64D3D20722 for ; Mon, 3 Aug 2020 09:45:59 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="N3cbxvW/"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="GCvPl4FZ" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 64D3D20722 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=VBuuKBDsuwVJB6hK1m/anhKMWYCsa2o8hc/UmhihuCk=; b=N3cbxvW/f66tSuPl2je61pQrp IauhcpH1IDDlCoKUEEktSWYfn7jcV4ZE8xFAenUJ1zdEeKDqZwHGqwJ6ycPDdV5M9dSXZDiAmVmtR Smc1HV0iV9SlGkvffNdyueWofc3amgsOv3nojVjbBxENgTZW/LCyt8HjG2ENyefU8tpo1xJWbmnaP pLxmWEhfchmvTYkv65kpmfobegou+0yjZiP7WQEZ9GyY3WbMYDO0y/EKKKPOIRuy0XjGMF0Np/vip EVx7PBzeGDoJu9yASAKx5AANM4LxSgZGEVKmL+S+guJEzvOQm5Oo523U1NVkOT4gtBtyzXRYLH9iW jdC7ZDREw==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1k2X0K-0000Fm-Vj; Mon, 03 Aug 2020 09:43:37 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k2WzY-0008K2-QN for linux-arm-kernel@lists.infradead.org; Mon, 03 Aug 2020 09:42:55 +0000 Received: from mwalle01.sab.local. (unknown [213.135.10.150]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id AB6FB23E4A; Mon, 3 Aug 2020 11:42:41 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1596447762; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=u2YFwrX80qqiw4JcrlmRXHvtEweVDg+9K0jhF2vIwA8=; b=GCvPl4FZjp8Z7zcfs3DcJlp9Fs3MhhquPtzkWl1OuWxxsOFVzVpt45cdzd4+dE/D8edmcB 7Izm6+xRIBYKwPewkCwpmJZHFxtCeUItLU7Y8kDkfIzqfp9mwCGz+DeMxwuR0jRM4aHm0a rM36XIcEmeRTCW+eS5eczGjjGpM1nlI= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v7 08/13] hwmon: add support for the sl28cpld hardware monitoring controller Date: Mon, 3 Aug 2020 11:35:54 +0200 Message-Id: <20200803093559.12289-9-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200803093559.12289-1-michael@walle.cc> References: <20200803093559.12289-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200803_054250_807417_A8D6C6C3 X-CRM114-Status: GOOD ( 32.41 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add support for the hardware monitoring controller of the sl28cpld board management controller. This driver is part of a multi-function device. Signed-off-by: Michael Walle Acked-by: Guenter Roeck Reviewed-by: Andy Shevchenko --- Changes since v6: - none Changes since v5: - none Changes since v4: - update copyright year - remove #include , suggested by Andy. - use PTR_ERR_OR_ZERO(), suggested by Andy. - remove the platform device table - don't use KBUID_MODNAME Changes since v3: - see cover letter Documentation/hwmon/index.rst | 1 + Documentation/hwmon/sl28cpld.rst | 36 ++++++++ drivers/hwmon/Kconfig | 10 +++ drivers/hwmon/Makefile | 1 + drivers/hwmon/sl28cpld-hwmon.c | 142 +++++++++++++++++++++++++++++++ 5 files changed, 190 insertions(+) create mode 100644 Documentation/hwmon/sl28cpld.rst create mode 100644 drivers/hwmon/sl28cpld-hwmon.c diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 750d3a975d82..d90c43c82936 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -154,6 +154,7 @@ Hardware Monitoring Kernel Drivers sht3x shtc1 sis5595 + sl28cpld smm665 smsc47b397 smsc47m192 diff --git a/Documentation/hwmon/sl28cpld.rst b/Documentation/hwmon/sl28cpld.rst new file mode 100644 index 000000000000..7ed65f78250c --- /dev/null +++ b/Documentation/hwmon/sl28cpld.rst @@ -0,0 +1,36 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Kernel driver sl28cpld +====================== + +Supported chips: + + * Kontron sl28cpld + + Prefix: 'sl28cpld' + + Datasheet: not available + +Authors: Michael Walle + +Description +----------- + +The sl28cpld is a board management controller which also exposes a hardware +monitoring controller. At the moment this controller supports a single fan +supervisor. In the future there might be other flavours and additional +hardware monitoring might be supported. + +The fan supervisor has a 7 bit counter register and a counter period of 1 +second. If the 7 bit counter overflows, the supervisor will automatically +switch to x8 mode to support a wider input range at the loss of +granularity. + +Sysfs entries +------------- + +The following attributes are supported. + +======================= ======================================================== +fan1_input Fan RPM. Assuming 2 pulses per revolution. +======================= ======================================================== diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 8dc28b26916e..a02829ec7386 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1479,6 +1479,16 @@ config SENSORS_RASPBERRYPI_HWMON This driver can also be built as a module. If so, the module will be called raspberrypi-hwmon. +config SENSORS_SL28CPLD + tristate "Kontron sl28cpld hardware monitoring driver" + select MFD_SIMPLE_MFD_I2C + help + If you say yes here you get support for the fan supervisor of the + sl28cpld board management controller. + + This driver can also be built as a module. If so, the module + will be called sl28cpld-hwmon. + config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." depends on GPIOLIB || COMPILE_TEST diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index a8f4b35b136b..dee8511f9348 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -159,6 +159,7 @@ obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o obj-$(CONFIG_SENSORS_SCH5636) += sch5636.o +obj-$(CONFIG_SENSORS_SL28CPLD) += sl28cpld-hwmon.o obj-$(CONFIG_SENSORS_SHT15) += sht15.o obj-$(CONFIG_SENSORS_SHT21) += sht21.o obj-$(CONFIG_SENSORS_SHT3x) += sht3x.o diff --git a/drivers/hwmon/sl28cpld-hwmon.c b/drivers/hwmon/sl28cpld-hwmon.c new file mode 100644 index 000000000000..e48f58ec5b9c --- /dev/null +++ b/drivers/hwmon/sl28cpld-hwmon.c @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sl28cpld hardware monitoring driver + * + * Copyright 2020 Kontron Europe GmbH + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define FAN_INPUT 0x00 +#define FAN_SCALE_X8 BIT(7) +#define FAN_VALUE_MASK GENMASK(6, 0) + +struct sl28cpld_hwmon { + struct regmap *regmap; + u32 offset; +}; + +static umode_t sl28cpld_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + return 0444; +} + +static int sl28cpld_hwmon_read(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int channel, long *input) +{ + struct sl28cpld_hwmon *hwmon = dev_get_drvdata(dev); + unsigned int value; + int ret; + + switch (attr) { + case hwmon_fan_input: + ret = regmap_read(hwmon->regmap, hwmon->offset + FAN_INPUT, + &value); + if (ret) + return ret; + /* + * The register has a 7 bit value and 1 bit which indicates the + * scale. If the MSB is set, then the lower 7 bit has to be + * multiplied by 8, to get the correct reading. + */ + if (value & FAN_SCALE_X8) + value = FIELD_GET(FAN_VALUE_MASK, value) << 3; + + /* + * The counter period is 1000ms and the sysfs specification + * says we should asssume 2 pulses per revolution. + */ + value *= 60 / 2; + + break; + default: + return -EOPNOTSUPP; + } + + *input = value; + return 0; +} + +static const u32 sl28cpld_hwmon_fan_config[] = { + HWMON_F_INPUT, + 0 +}; + +static const struct hwmon_channel_info sl28cpld_hwmon_fan = { + .type = hwmon_fan, + .config = sl28cpld_hwmon_fan_config, +}; + +static const struct hwmon_channel_info *sl28cpld_hwmon_info[] = { + &sl28cpld_hwmon_fan, + NULL +}; + +static const struct hwmon_ops sl28cpld_hwmon_ops = { + .is_visible = sl28cpld_hwmon_is_visible, + .read = sl28cpld_hwmon_read, +}; + +static const struct hwmon_chip_info sl28cpld_hwmon_chip_info = { + .ops = &sl28cpld_hwmon_ops, + .info = sl28cpld_hwmon_info, +}; + +static int sl28cpld_hwmon_probe(struct platform_device *pdev) +{ + struct sl28cpld_hwmon *hwmon; + struct device *hwmon_dev; + int ret; + + if (!pdev->dev.parent) + return -ENODEV; + + hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL); + if (!hwmon) + return -ENOMEM; + + hwmon->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!hwmon->regmap) + return -ENODEV; + + ret = device_property_read_u32(&pdev->dev, "reg", &hwmon->offset); + if (ret) + return -EINVAL; + + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, + "sl28cpld_hwmon", hwmon, + &sl28cpld_hwmon_chip_info, NULL); + if (IS_ERR(hwmon_dev)) + dev_err(&pdev->dev, "failed to register as hwmon device"); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct of_device_id sl28cpld_hwmon_of_match[] = { + { .compatible = "kontron,sl28cpld-fan" }, + {} +}; +MODULE_DEVICE_TABLE(of, sl28cpld_hwmon_of_match); + +static struct platform_driver sl28cpld_hwmon_driver = { + .probe = sl28cpld_hwmon_probe, + .driver = { + .name = "sl28cpld-fan", + .of_match_table = sl28cpld_hwmon_of_match, + }, +}; +module_platform_driver(sl28cpld_hwmon_driver); + +MODULE_DESCRIPTION("sl28cpld Hardware Monitoring Driver"); +MODULE_AUTHOR("Michael Walle "); +MODULE_LICENSE("GPL");