deleted file mode 100644
@@ -1,66 +0,0 @@
-Texas Instruments K3 Interrupt Aggregator
-=========================================
-
-The Interrupt Aggregator (INTA) provides a centralized machine
-which handles the termination of system events to that they can
-be coherently processed by the host(s) in the system. A maximum
-of 64 events can be mapped to a single interrupt.
-
-
- Interrupt Aggregator
- +-----------------------------------------+
- | Intmap VINT |
- | +--------------+ +------------+ |
- m ------>| | vint | bit | | 0 |.....|63| vint0 |
- . | +--------------+ +------------+ | +------+
- . | . . | | HOST |
-Globalevents ------>| . . |------>| IRQ |
- . | . . | | CTRL |
- . | . . | +------+
- n ------>| +--------------+ +------------+ |
- | | vint | bit | | 0 |.....|63| vintx |
- | +--------------+ +------------+ |
- | |
- +-----------------------------------------+
-
-Configuration of these Intmap registers that maps global events to vint is done
-by a system controller (like the Device Memory and Security Controller on K3
-AM654 SoC). Driver should request the system controller to get the range
-of global events and vints assigned to the requesting host. Management
-of these requested resources should be handled by driver and requests
-system controller to map specific global event to vint, bit pair.
-
-Communication between the host processor running an OS and the system
-controller happens through a protocol called TI System Control Interface
-(TISCI protocol). For more details refer:
-Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
-
-TISCI Interrupt Aggregator Node:
--------------------------------
-- compatible: Must be "ti,sci-inta".
-- reg: Should contain registers location and length.
-- interrupt-controller: Identifies the node as an interrupt controller
-- msi-controller: Identifies the node as an MSI controller.
-- interrupt-parent: phandle of irq parent.
-- ti,sci: Phandle to TI-SCI compatible System controller node.
-- ti,sci-dev-id: TISCI device id of interrupt controller.
-- ti,interrupt-ranges: Set of triplets containing ranges that convert
- the INTA output interrupt numbers to parent's
- interrupt number. Each triplet has following entries:
- - First entry specifies the base for vint
- - Second entry specifies the base for parent irqs
- - Third entry specifies the limit
-
-
-Example:
---------
-main_udmass_inta: interrupt-controller@33d00000 {
- compatible = "ti,sci-inta";
- reg = <0x0 0x33d00000 0x0 0x100000>;
- interrupt-controller;
- msi-controller;
- interrupt-parent = <&main_navss_intr>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <179>;
- ti,interrupt-ranges = <0 0 256>;
-};
new file mode 100644
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-inta.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Interrupt Aggregator
+
+maintainers:
+ - Lokesh Vutla <lokeshvutla@ti.com>
+
+allOf:
+ - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+description: |
+ The Interrupt Aggregator (INTA) provides a centralized machine
+ which handles the termination of system events to that they can
+ be coherently processed by the host(s) in the system. A maximum
+ of 64 events can be mapped to a single interrupt.
+
+ Interrupt Aggregator
+ +-----------------------------------------+
+ | Intmap VINT |
+ | +--------------+ +------------+ |
+ m ------>| | vint | bit | | 0 |.....|63| vint0 |
+ . | +--------------+ +------------+ | +------+
+ . | . . | | HOST |
+ Globalevents ------>| . . |----->| IRQ |
+ . | . . | | CTRL |
+ . | . . | +------+
+ n ------>| +--------------+ +------------+ |
+ | | vint | bit | | 0 |.....|63| vintx |
+ | +--------------+ +------------+ |
+ | |
+ +-----------------------------------------+
+
+ Configuration of these Intmap registers that maps global events to vint is
+ done by a system controller (like the Device Memory and Security Controller
+ on AM654 SoC). Driver should request the system controller to get the range
+ of global events and vints assigned to the requesting host. Management
+ of these requested resources should be handled by driver and requests
+ system controller to map specific global event to vint, bit pair.
+
+ Communication between the host processor running an OS and the system
+ controller happens through a protocol called TI System Control Interface
+ (TISCI protocol).
+
+properties:
+ compatible:
+ const: ti,sci-inta
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ msi-controller: true
+
+ ti,interrupt-ranges:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ description: |
+ Interrupt ranges that converts the INTA output hw irq numbers
+ to parents's input interrupt numbers.
+ items:
+ items:
+ - description: |
+ "output_irq" specifies the base for inta output irq
+ - description: |
+ "parent's input irq" specifies the base for parent irq
+ - description: |
+ "limit" specifies the limit for translation
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - msi-controller
+ - ti,sci
+ - ti,sci-dev-id
+ - ti,interrupt-ranges
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ main_udmass_inta: msi-controller@33d00000 {
+ compatible = "ti,sci-inta";
+ reg = <0x0 0x33d00000 0x0 0x100000>;
+ interrupt-controller;
+ msi-controller;
+ interrupt-parent = <&main_navss_intr>;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <179>;
+ ti,interrupt-ranges = <0 0 256>;
+ };
+ };
@@ -16991,7 +16991,7 @@ L: linux-arm-kernel@lists.infradead.org
S: Maintained
F: Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
F: Documentation/devicetree/bindings/clock/ti,sci-clk.txt
-F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
+F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
F: Documentation/devicetree/bindings/reset/ti,sci-reset.txt
F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt