diff mbox series

[v33,5/6] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node

Message ID 20200812195020.13568-6-dmurphy@ti.com (mailing list archive)
State New, archived
Headers show
Series LP50xx addition and remainder Multicolor patches | expand

Commit Message

Dan Murphy Aug. 12, 2020, 7:50 p.m. UTC 
Add the reg property to each channel node.  This update is
to accommodate the multicolor framework.  In addition to the
accommodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
---
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

Comments

Shawn Guo Aug. 23, 2020, 12:52 a.m. UTC | #1 
On Wed, Aug 12, 2020 at 02:50:19PM -0500, Dan Murphy wrote:
> Add the reg property to each channel node.  This update is
> to accommodate the multicolor framework.  In addition to the
> accommodation this allows the LEDs to be placed on any channel
> and allow designs to skip channels as opposed to requiring
> sequential order.
> 
> Acked-by: Pavel Machek <pavel@ucw.cz>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> CC: Shawn Guo <shawnguo@kernel.org>
> CC: Sascha Hauer <s.hauer@pengutronix.de>
> CC: Pengutronix Kernel Team <kernel@pengutronix.de>
> CC: Fabio Estevam <festevam@gmail.com>
> CC: NXP Linux Team <linux-imx@nxp.com>

Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 2b9423d55c37..77aa90640052 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -258,29 +258,35 @@  leds: led-controller@30 {
 		reg = <0x30>;
 		clock-mode = /bits/ 8 <1>;
 		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		chan0 {
+		chan@0 {
 			chan-name = "R";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
+			reg = <0>;
 		};
 
-		chan1 {
+		chan@1 {
 			chan-name = "G";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
+			reg = <1>;
 		};
 
-		chan2 {
+		chan@2 {
 			chan-name = "B";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
+			reg = <2>;
 		};
 
-		chan3 {
+		chan@3 {
 			chan-name = "W";
 			led-cur = /bits/ 8 <0x0>;
 			max-cur = /bits/ 8 <0x0>;
+			reg = <3>;
 		};
 	};