@@ -49,20 +49,18 @@
leds: gpio-leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&red_led_pin>, <&blue_led_pin>;
red_led: led-0 {
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
label = "orion:red:led";
- pinctrl-names = "default";
- pinctrl-0 = <&led_ctl>;
default-state = "on";
};
blue_led: led-1 {
gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
label = "orion:blue:led";
- pinctrl-names = "default";
- pinctrl-0 = <&stby_pwren>;
default-state = "off";
};
};
@@ -256,11 +254,11 @@
};
leds {
- stby_pwren: stby-pwren {
+ blue_led_pin: blue-led-pin {
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
- led_ctl: led-ctl {
+ red_led_pin: red-led-pin {
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -42,12 +42,12 @@
leds: gpio-leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led_pin>;
work_led: led-0 {
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
label = "r88:green:led";
- pinctrl-names = "default";
- pinctrl-0 = <&led_ctl>;
};
};
@@ -275,7 +275,7 @@
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
- led_ctl: led-ctl {
+ work_led_pin: work-led-pin {
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
Current dts files with 'gpio-led' nodes were manually verified. In order to automate this process leds-gpio.txt has been converted to yaml. With this conversion a check for pattern properties was added. In part 3 rename and label gpio-led subnodes with pinctrl. To make things equal to other dts files move pinctrl below the compatible property. Fix with help of the following rules: 1: Add nodename in the preferred form. 2: Always add a label that ends with '_led' to prevent conflicts with other labels such as 'power' and 'mmc' 3: If leds need pinctrl add a label that ends with '_led_pin' also to prevent conflicts with other labels. patternProperties: # The first form is preferred, but fall back to just 'led' # anywhere in the node name to at least catch some child nodes. "(^led-[0-9a-f]$|led)": make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/ leds-gpio.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts | 10 ++++------ arch/arm64/boot/dts/rockchip/rk3368-r88.dts | 6 +++--- 2 files changed, 7 insertions(+), 9 deletions(-)