@@ -27,5 +27,6 @@ subdir-y += socionext
subdir-y += sprd
subdir-y += synaptics
subdir-y += ti
+subdir-y += toshiba
subdir-y += xilinx
subdir-y += zte
new file mode 100644
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-rm-mbrc.dtb
new file mode 100644
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree File for TMPV7708 RM main board
+ *
+ * (C) Copyright 2020, Toshiba Corporation.
+ * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ */
+
+/dts-v1/;
+
+#include "tmpv7708.dtsi"
+
+/ {
+ model = "Toshiba TMPV7708 RM main board";
+ compatible = "toshiba,tmpv7708-rm-mbrc", "toshiba,tmpv7708";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ /* 768MB memory */
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x30000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+ clocks = <&uart_clk>;
+ clock-names = "apb_pclk";
+};
+
+&uart1 {
+ status = "okay";
+ clocks = <&uart_clk>;
+ clock-names = "apb_pclk";
+};
new file mode 100644
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for the TMPV7708
+ *
+ * (C) Copyright 2018 - 2020, Toshiba Corporation.
+ * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x81000000 0x00300000; /* cpu-release-addr */
+
+/ {
+ compatible = "toshiba,tmpv7708";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x81100000>;
+ reg = <0x00>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x81100000>;
+ reg = <0x01>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x81100000>;
+ reg = <0x02>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x81100000>;
+ reg = <0x03>;
+ };
+
+ cpu4: cpu@100 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x81100000>;
+ reg = <0x100>;
+ };
+
+ cpu5: cpu@101 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x81100000>;
+ reg = <0x101>;
+ };
+
+ cpu6: cpu@102 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x81100000>;
+ reg = <0x102>;
+ };
+
+ cpu7: cpu@103 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x81100000>;
+ reg = <0x103>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts =
+ <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ uart_clk: uart-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <150000000>;
+ #clock-cells = <0>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ gic: interrupt-controller@24001000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ reg = <0 0x24001000 0 0x1000>,
+ <0 0x24002000 0 0x2000>,
+ <0 0x24004000 0 0x2000>,
+ <0 0x24006000 0 0x2000>;
+ };
+
+ pmux: pmux@24190000 {
+ compatible = "toshiba,tmpv7708-pinctrl";
+ reg = <0 0x24190000 0 0x10000>;
+ };
+
+ uart0: serial@28200000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0 0x28200000 0 0x1000>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "disabled";
+ };
+
+ uart1: serial@28201000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0 0x28201000 0 0x1000>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "disabled";
+ };
+
+ uart2: serial@28202000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0 0x28202000 0 0x1000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+ };
+
+ uart3: serial@28203000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0 0x28203000 0 0x1000>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@28030000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28030000 0 0x1000>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@28031000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28031000 0 0x1000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@28032000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28032000 0 0x1000>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@28033000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28033000 0 0x1000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@28034000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28034000 0 0x1000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@28035000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28035000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@28036000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28036000 0 0x1000>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@28037000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28037000 0 0x1000>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@28038000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28038000 0 0x1000>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c8_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi@28140000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0 0x28140000 0 0x1000>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@28141000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0 0x28141000 0 0x1000>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@28142000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0 0x28142000 0 0x1000>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi3: spi@28143000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0 0x28143000 0 0x1000>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_pins>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi4: spi@28144000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0 0x28144000 0 0x1000>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi4_pins>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi5: spi@28145000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0 0x28145000 0 0x1000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi5_pins>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi6: spi@28146000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0 0x28146000 0 0x1000>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi6_pins>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+};
+
+#include "tmpv7708_pins.dtsi"
new file mode 100644
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&pmux {
+ spi0_pins: spi0-pins {
+ function = "spi0";
+ groups = "spi0_grp";
+ };
+ spi1_pins: spi1-pins {
+ function = "spi1";
+ groups = "spi1_grp";
+ };
+ spi2_pins: spi2-pins {
+ function = "spi2";
+ groups = "spi2_grp";
+ };
+ spi3_pins: spi3-pins {
+ function = "spi3";
+ groups = "spi3_grp";
+ };
+ spi4_pins: spi4-pins {
+ function = "spi4";
+ groups = "spi4_grp";
+ };
+ spi5_pins: spi5-pins {
+ function = "spi5";
+ groups = "spi5_grp";
+ };
+ spi6_pins: spi6-pins {
+ function = "spi6";
+ groups = "spi6_grp";
+ };
+ uart0_pins: uart0-pins {
+ function = "uart0";
+ groups = "uart0_grp";
+ };
+ uart1_pins: uart1-pins {
+ function = "uart1";
+ groups = "uart1_grp";
+ };
+ uart2_pins: uart2-pins {
+ function = "uart2";
+ groups = "uart2_grp";
+ };
+ uart3_pins: uart3-pins {
+ function = "uart3";
+ groups = "uart3_grp";
+ };
+ i2c0_pins: i2c0-pins {
+ function = "i2c0";
+ groups = "i2c0_grp";
+ bias-pull-up;
+ };
+ i2c1_pins: i2c1-pins {
+ function = "i2c1";
+ groups = "i2c1_grp";
+ bias-pull-up;
+ };
+ i2c2_pins: i2c2-pins {
+ function = "i2c2";
+ groups = "i2c2_grp";
+ bias-pull-up;
+ };
+ i2c3_pins: i2c3-pins {
+ function = "i2c3";
+ groups = "i2c3_grp";
+ bias-pull-up;
+ };
+ i2c4_pins: i2c4-pins {
+ function = "i2c4";
+ groups = "i2c4_grp";
+ bias-pull-up;
+ };
+ i2c5_pins: i2c5-pins {
+ function = "i2c5";
+ groups = "i2c5_grp";
+ bias-pull-up;
+ };
+ i2c6_pins: i2c6-pins {
+ function = "i2c6";
+ groups = "i2c6_grp";
+ bias-pull-up;
+ };
+ i2c7_pins: i2c7-pins {
+ function = "i2c7";
+ groups = "i2c7_grp";
+ bias-pull-up;
+ };
+ i2c8_pins: i2c8-pins {
+ function = "i2c8";
+ groups = "i2c8_grp";
+ bias-pull-up;
+ };
+};
Add basic support for the Visconti TMPV7708 SoC peripherals - - CPU - CA53 x 4 and 2 cluster. - not support PSCI, currently only spin-table is supported. - Interrupt controller (ARM Generic Interrupt Controller) - Timer (ARM architected timer) - UART (ARM PL011 UART controller) - SPI (ARM PL022 SPI controller) - I2C (Synopsys DesignWare APB I2C Controller) - Pin control (Visconti specific) Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> --- arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/toshiba/Makefile | 2 + .../boot/dts/toshiba/tmpv7708-rm-mbrc.dts | 43 ++ arch/arm64/boot/dts/toshiba/tmpv7708.dtsi | 390 ++++++++++++++++++ .../arm64/boot/dts/toshiba/tmpv7708_pins.dtsi | 93 +++++ 5 files changed, 529 insertions(+) create mode 100644 arch/arm64/boot/dts/toshiba/Makefile create mode 100644 arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts create mode 100644 arch/arm64/boot/dts/toshiba/tmpv7708.dtsi create mode 100644 arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi