diff mbox series

[v2,10/10] ARM: dts: imx50-kobo-aura: Add Netronix embedded controller

Message ID 20200905144503.1067124-3-j.neuschaefer@gmx.net (mailing list archive)
State New, archived
Headers show
Series Netronix embedded controller driver for Kobo and Tolino ebook readers | expand

Commit Message

J. Neuschäfer Sept. 5, 2020, 2:45 p.m. UTC 
Enable the Netronix EC on the Kobo Aura ebook reader.

Several features are still missing:
 - Frontlight/backlight. The vendor kernel drives the frontlight LED
   using the PWM output of the EC and an additional boost pin that
   increases the brightness.
 - Battery monitoring
 - Interrupts for RTC alarm and low-battery events

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---

v2:
- Fix pwm-cells property (should be 2, not 1)
---
 arch/arm/boot/dts/imx50-kobo-aura.dts | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

--
2.28.0
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts
index a0eaf869b9135..003a7d894902c 100644
--- a/arch/arm/boot/dts/imx50-kobo-aura.dts
+++ b/arch/arm/boot/dts/imx50-kobo-aura.dts
@@ -6,6 +6,7 @@ 
 /dts-v1/;
 #include "imx50.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>

 / {
 	model = "Kobo Aura (N514)";
@@ -135,10 +136,34 @@  &i2c3 {
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";

-	/* TODO: embedded controller at 0x43 */
+	embedded-controller@43 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ec>;
+		compatible = "netronix,ntxec";
+		reg = <0x43>;
+		system-power-controller;
+		interrupts-extended = <&gpio4 11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		ec_pwm: pwm {
+			compatible = "netronix,ntxec-pwm";
+			#pwm-cells = <2>;
+		};
+
+		rtc {
+			compatible = "netronix,ntxec-rtc";
+		};
+	};
 };

 &iomuxc {
+	pinctrl_ec: ec {
+		fsl,pins = <
+			MX50_PAD_CSPI_SS0__GPIO4_11		0x0	/* INT */
+		>;
+	};
+
 	pinctrl_gpiokeys: gpiokeys {
 		fsl,pins = <
 			MX50_PAD_CSPI_MISO__GPIO4_10		0x0